1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Juno 6-Pack 6-inch and 4-inch Wafer LED Downlights. These energy-efficient LED downlights feature Switchable White technology, allowing adjustment of color temperature, and a slim design for versatile installation.
2. Consignes de sécurité
Veuillez lire attentivement toutes les instructions avant l'installation et conserver ce manuel pour toute consultation ultérieure. Le non-respect de ces instructions peut entraîner un choc électrique, un incendie ou d'autres dangers.
- Coupez toujours le courant au disjoncteur avant de commencer l'installation ou d'effectuer toute opération de maintenance.
- Consultez un électricien qualifié si vous n’êtes pas sûr du processus d’installation.
- Assurez-vous que tous les raccordements électriques sont conformes aux codes et règlements locaux.
- Ne modifiez pas le dispositif ni ses composants.
- These fixtures are rated for wet locations, making them suitable for various indoor and outdoor applications.
- Do not install near heat sources or in areas with excessive moisture beyond wet location rating.
3. Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- 6x Juno 6-inch Wafer LED Downlights with integrated drivers
- 1x Juno 4-inch Wafer LED Downlight with integrated driver (sold separately, included in this bundle)
- Installation hardware (e.g., junction box, connectors)

Image : Terminéview of the Juno 6-pack 6-inch and single 4-inch wafer LED downlights, showing the light fixtures and their associated driver boxes.
4. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Marque | Junon |
| Modèle | 6-Pack 6-inch and 4-inch Wafer LED Downlights |
| Source de lumière | LED intégrée |
| Température de couleur | Switchable White (3000K, 3500K, 4000K, 5000K) |
| Indice de rendu des couleurs (IRC) | 90+ |
| Capacité de gradation | Dimmable down to 10% brightness |
| Durée de vie | 50,000 heures |
| Type d'installation | Flush Mount, Housing-free |
| Hauteur du luminaire | Slim 2-inch (6-inch models), 1.7-inch (4-inch models) |
| Environnement d'utilisation | Indoor/Outdoor (Wet Location Rated) |
| Matériel | Copper (Shade and general material) |
| Finition | Blanc mat |
5. Configuration et installation
These wafer LED downlights are designed for easy installation in new construction or remodeling projects, eliminating the need for traditional recessed housings. They are suitable for ceilings as shallow as 1.7 inches (4-inch models) or 2 inches (6-inch models).
Étapes d'installation :
- Couper l'alimentation : Locate the circuit breaker controlling the installation area and turn off the power.
- Préparer l'ouverture : Cut a circular hole in the ceiling according to the specified diameter for your 6-inch or 4-inch fixture. Refer to the template provided with the product packaging for precise sizing.
- Connecter le câblage : Open the junction box cover on the integrated LED driver. Connect the household electrical wires (live, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure.
- Boîte de jonction sécurisée : Place the junction box into the ceiling opening.
- Installer le luminaire : Connect the LED downlight fixture to the driver box via the quick-connect cable. Push the spring clips on the sides of the downlight upwards and insert the fixture into the ceiling opening. The clips will spring back down to hold the fixture securely in place.
- Restaurer l'alimentation : Remettez le courant au disjoncteur.

Image : Un gros plan view of a single Juno wafer LED downlight connected to its external driver box, illustrating the compact design.

Image: Graphic highlighting features of the Wafer LED Regressed Downlight, including easy installation, affordability, and a 5-year limited warranty.
6. Mode d'emploi
Switchable White Feature:
Your Juno Wafer LED Downlights are equipped with Switchable White technology, allowing you to select from multiple color temperatures to suit your preference or application. The color temperature switch is located on the integrated driver box.
- Before installing the fixture into the ceiling, locate the small switch on the side of the driver box.
- Slide the switch to select your desired color temperature: 3000K (Warm White), 3500K (Neutral White), 4000K (Cool White), or 5000K (Daylight).
- Once the desired setting is chosen, proceed with the installation. The color temperature cannot be changed without accessing the driver box.

Image: A close-up of the driver box with a red switch indicating the selectable color temperatures: 2700K, 3000K, 3500K, 4000K, and 5000K.
Fonctionnalité de gradation :
These downlights are dimmable down to 10% brightness. To utilize the dimming feature, ensure you connect the fixtures to a compatible LED dimmer switch (sold separately). Refer to the dimmer manufacturer's instructions for proper installation and operation.
7. Entretien
Juno Wafer LED Downlights are designed for long-term, maintenance-free operation with an extended 50,000-hour service life.
- Nettoyage: Pour nettoyer le luminaire, assurez-vous qu'il est hors tension. Utilisez un chiffon doux, sec ou légèrement rêche.amp Chiffon. N’utilisez pas de nettoyants abrasifs ni de solvants, car ils pourraient endommager la finition ou les composants électriques.
- Durée de vie de la LED: The integrated LEDs are not user-replaceable. The fixture is designed to provide consistent illumination for its rated lifespan.
8. Dépannage
If you encounter issues with your Juno Wafer LED Downlights, refer to the following common troubleshooting steps:
- La lumière ne s'allume pas :
- Vérifiez le disjoncteur pour vous assurer que le courant est allumé.
- Verify all wire connections are secure and correctly wired.
- Assurez-vous que l'interrupteur est en position « ON ».
- La lumière clignote ou s'atténue de façon incorrecte :
- Assurez-vous d'utiliser un variateur compatible avec les LED.
- Vérifiez les connexions électriques au niveau du luminaire ou du variateur.
- The dimmer may not be compatible with the fixture; consult the dimmer's specifications.
- Température de couleur incorrecte :
- The color temperature switch on the driver box must be set before installation. If you need to change it, power off the fixture, carefully remove it from the ceiling to access the driver box, adjust the switch, and reinstall.
Si ces étapes ne résolvent pas le problème, contactez le service client.
9. Garantie et assistance
Garantie limitée :
Juno Wafer LED Downlights come with a Garantie limitée de 5 ansCette garantie couvre les défauts de matériaux et de fabrication dans des conditions normales d'utilisation. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
Assistance clientèle :
For technical assistance, warranty inquiries, or replacement parts, please contact Juno customer support through their official website or the retailer where the product was purchased. Provide your product model number and date of purchase when contacting support.