1. Introduction et présentation du produitview
The Srutueo T02 Wireless Remote Control and Front Controller system is designed for convenient operation of various electric devices. This system operates on a 315 MHz frequency and is suitable for controlling electric projector screens, electric curtains, electric towers, garage doors, and extensible doors. It provides a reliable wireless solution for managing these applications.
Image 1.1: The Srutueo T02 Wireless Remote Control, showing its ergonomic design with three control buttons.
2. Contenu du produit
Upon opening the package, please verify that all components are present and undamaged. The standard package for the Srutueo T02 system includes:
- 1 x Front Controller (Receiver Unit)
- 1 x télécommande sans fil
Image 2.1: The complete Srutueo T02 system, featuring both the wireless remote control and the front controller (receiver unit).
3. Spécifications
Detailed technical specifications for the Srutueo T02 Wireless Remote Control and Front Controller system are provided below:
| Fonctionnalité | Spécification |
|---|---|
| Température de fonctionnement | -10°C à +50°C |
| Vol d'exploitationtage (Récepteur) | AC220V ±10% / 50-60Hz |
| Distance de transmission | 50-100 mètres (zone dégagée) |
| Fréquence de fonctionnement | 315 MHz |
| Puissance de charge maximale | ≤ 500 W |
| Dimensions du récepteur | Environ 5 cm x 8 cm |
| Dimensions de la télécommande | Environ 4.3 cm x 12.5 cm |
| Nombre de boutons (télécommande) | 3 |
| Technologie de connectivité | Radio Fréquence (RF) |
4. Configuration et installation
Proper installation of the Front Controller (receiver unit) is crucial for safe and effective operation. Due to the AC220V operating voltage, it is highly recommended that installation be performed by a qualified electrician or a professional familiar with electrical wiring.
4.1. Installation de l'unité réceptrice
- Coupure de courant : Before beginning any wiring, ensure that the main power supply to the device you intend to control (e.g., projector screen motor, curtain motor, garage door opener) is completely disconnected at the circuit breaker.
- Câblage : Connect the AC220V power input to the designated terminals on the receiver unit. Connect the output terminals of the receiver unit to the corresponding control inputs of your electric device. Refer to the wiring diagram provided with your electric device for specific connections (e.g., Up, Down, Common/Neutral). The receiver unit has clearly marked terminals for AC220V input and motor control outputs (Aidde/Middle, Rise/Up, Drop/Down).
- Montage: Securely mount the receiver unit in a dry, protected location, away from direct moisture or extreme temperatures. Ensure adequate ventilation.
- Rétablissement du courant : Once all wiring is complete and secure, restore power to the circuit.
4.2. Remote Control Pairing (Learning Function)
The remote control needs to be paired with the receiver unit to function.
- Locate Learning Key: On the receiver unit, locate the "Learning Key" button. This is typically a small button, often labeled "学习键" (Learning Key) or similar, next to an indicator light.
- Entrez en mode d'apprentissage : Press and hold the "Learning Key" button on the receiver unit for approximately 3-5 seconds until the indicator light on the receiver unit illuminates or flashes, indicating it is in learning mode.
- Appuyez sur le bouton de la télécommande : While the receiver is in learning mode, press any button on the wireless remote control that you wish to program (e.g., the "Up" button). The indicator light on the receiver should flash or change state to confirm successful pairing.
- Fonctionnalité de test : After pairing, test the remote control to ensure it operates the connected device correctly.
4.3. Remote Control Holder Installation
A wall-mountable holder is included for convenient storage of your remote control.
- Choisissez l'emplacement: Select a convenient location near the controlled device, ensuring it is within easy reach.
- Marquer les trous : Use the holder as a template to mark the positions for mounting screws on the wall.
- Support sécurisé : Drill pilot holes if necessary, then secure the holder to the wall using appropriate screws (not included).
Image 4.1: The Srutueo T02 remote control alongside its wall-mountable holder, illustrating how the remote can be stored.
5. Mode d'emploi
The Srutueo T02 remote control features three distinct buttons for intuitive operation of your connected device.
- Up Button (Top): Press this button to activate the "Up" or "Rise" function of your connected device (e.g., raise a projector screen, open curtains, open a garage door).
- Middle Button (Stop/Aidde): Press this button to stop the movement of your connected device at any desired position. This acts as a "Stop" or "Middle" position command.
- Down Button (Bottom): Press this button to activate the "Down" or "Drop" function of your connected device (e.g., lower a projector screen, close curtains, close a garage door).
Ensure you are within the effective transmission range of 50-100 meters for optimal performance. Obstacles such as walls and other electronic devices may reduce the effective range.
6. Entretien
To ensure the longevity and reliable performance of your Srutueo T02 system, follow these simple maintenance guidelines:
- Nettoyage: Wipe the remote control and receiver unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse in water.
- Remplacement de la pile (télécommande) : While the specific battery type is not provided, remote controls typically use small button-cell or AAA batteries. If the remote's indicator light does not illuminate or its range decreases significantly, replace the battery. Ensure correct polarity when inserting new batteries.
- Conditions environnementales : Avoid exposing the units to extreme temperatures, high humidity, direct sunlight, or corrosive environments.
- Dégâts physiques : Protect the units from drops, impacts, and excessive force, which can damage internal components.
7. Dépannage
If you encounter issues with your Srutueo T02 system, refer to the following troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| Remote control does not operate the device. |
|
|
| Device only moves in one direction or erratically. |
|
|
| Reduced transmission range. |
|
|
8. Consignes de sécurité
Veuillez lire et respecter les consignes de sécurité suivantes afin d'éviter toute blessure ou tout dommage au produit :
- Sécurité électrique : The receiver unit operates on AC220V. All electrical connections must be made by a qualified professional in accordance with local electrical codes and regulations. Always disconnect power before wiring.
- Utilisation en intérieur uniquement : This product is designed for indoor use. Do not expose it to rain, moisture, or extreme environmental conditions.
- Enfants et animaux domestiques : Keep the remote control and receiver unit out of reach of children and pets to prevent accidental operation or damage.
- Ne pas démonter : Do not attempt to disassemble or modify the product. This can lead to electric shock, fire, or product malfunction, and will void any warranty.
- Utilisation appropriée : Utilisez ce produit uniquement pour l'usage auquel il est destiné, tel que décrit dans ce manuel.
9. Garantie et assistance
Specific warranty details for the Srutueo T02 Wireless Remote Control and Front Controller are not provided in this manual. For information regarding warranty coverage, technical support, or service, please contact the retailer or the manufacturer, Srutueo, directly.
Lorsque vous contactez l'assistance, veuillez avoir à portée de main le numéro de modèle de votre produit (T02) et les informations d'achat.
