1. Introduction
The FOXWELL NT710 is an advanced OBD2 diagnostic scan tool designed for comprehensive vehicle diagnostics, particularly for Porsche models. It features an Android 9.0 system, a 5.5-inch intuitive touchscreen, and supports a wide range of diagnostic and maintenance functions. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your NT710 device.
2. Installation et utilisation initiale
2.1 Déballage et composants
À l'ouverture de l'emballage, assurez-vous que tous les composants sont présents :
- 1 x FOXWELL NT710 Car Diagnostic Tablet
- 1 câble de diagnostic
- 1 x Carrying Hard Case
- 1 x Guide rapide
Image: The FOXWELL NT710 diagnostic tablet, diagnostic cable, hard carrying case, and quick guide are included in the package.
2.2 Appareil terminéview
The NT710 features a 5.5-inch touchscreen, runs on Android 9.0, and is equipped with a 4000mAh battery and 32GB of memory. It supports Bluetooth and Wi-Fi connectivity.
Image: The FOXWELL NT710 diagnostic tool highlighting its 5.5-inch touchscreen, Android 9.0 system, 4000mAh battery, and 32GB memory.
2.3 Mise sous tension et configuration initiale
Press the power button to turn on the device. Follow the on-screen prompts to complete the initial setup, including language selection and Wi-Fi connection. A stable Wi-Fi connection is essential for software updates.
2.4 Connexion au véhicule
Locate your vehicle's OBD2 port, typically found under the dashboard on the driver's side. Connect the diagnostic cable from the NT710 to the vehicle's OBD2 port. Ensure the vehicle's ignition is in the ON position (engine off or running, depending on the test).
Video: This video demonstrates the FOXWELL NT710's features, including its interface, update process, and various diagnostic and active test functions like window control and wiper operation.
3. Utilisation de l'outil de diagnostic
3.1 OE-Level All-Systems Diagnosis
The NT710 can perform a full electronic system diagnosis for Porsche vehicles, covering modules such as engine, ABS, airbag, transmission, chassis, and HVAC. Key diagnostic functions include:
- Lire/Effacer les codes : Retrieve and erase diagnostic trouble codes (DTCs).
- Flux de données en direct : View Paramètres de données en temps réel provenant de divers capteurs et composants.
- Auto VIN/Scan: Automatically identify vehicle information for quick diagnosis.
- Informations sur l'ECU : Access electronic control unit details.
- Test actif : Perform bi-directional control tests (see section 3.3).
Image: The FOXWELL NT710 performing OE-Level All Systems Diagnostics, illustrating its capability to read/clear codes, view live data, and perform active tests across various vehicle systems.
3.2 Fonctions OBD2 complètes pour toutes les voitures
Beyond Porsche-specific diagnostics, the NT710 supports full OBD2 test functions for all cars manufactured after 1996 that comply with the OBD2 protocol. These functions include:
- Lire et effacer les codes
- Données en direct
- Arrêt sur image
- Test du capteur O2
- Test du système EVAP
- Test du moniteur embarqué
- Test de composants
- Vehicle Information (VIN)
- Préparation I/M
- Recherche DTC
Image: An illustration of the full OBDII functions available on the NT710, including reading and clearing codes, live data, freeze frame, and various system tests.
3.3 Contrôle bidirectionnel / Test actif
The NT710 allows you to send commands directly to the vehicle's ECU and components to perform specific active tests. This helps in verifying component functionality and identifying potential problems. ExampVoici quelques exemples de tests actifs :
- ABS manual control test
- ABS motor test
- Air pump relay test
- EVAP purge solenoid test
- Spark advance test
- Fan speed desired test
- Cooling fan test
- Test d'actionneur
- Fuel pump on/off
- A/C clutch on/off
- Retract electronic parking brake
Image: The FOXWELL NT710 demonstrating bi-directional control, showing how it sends commands to vehicle components for active testing.
4. Services de maintenance
The NT710 offers a comprehensive suite of maintenance services to help manage your Porsche vehicle's upkeep:
- Réinitialisation de l'huile : Réinitialisez le témoin de vidange après la vidange.
- Enregistrement de la batterie : Register a new battery to the vehicle's system.
- Réinitialisation du frein de stationnement (EPB) : Reset the electronic parking brake system for brake pad replacement.
- TPS (Throttle Position Relearn): Réapprenez la position du corps de papillon.
- ABS/SRS Reset: Reset Anti-lock Braking System and Supplemental Restraint System warnings.
- Régénération du FAP : Effectuer la régénération du filtre à particules diesel.
- Réinitialisation TPMS : Réinitialiser le système de surveillance de la pression des pneus.
- Codage de l'injecteur : Code new injectors to the ECU.
- Suspension pneumatique : Adjust or calibrate air suspension systems.
- CKP (Crankshaft Sensor Relearn): Perform crankshaft position sensor relearn procedures.
- Réinitialisation SAS : Calibrage du capteur d'angle de braquage.
Image: A visual representation of the various maintenance services supported by the FOXWELL NT710, including oil reset, EPB reset, and injector coding.
4.1 Specific Maintenance Functions
Image: Oil Light Reset.
Image: Injector Coding.
Image: ABS Bleeding.
Image: EPB Reset.
5. Software Updates and Data Management
5.1 One-Click Wi-Fi Update
The NT710 supports lifetime free updates via Wi-Fi. Connect the device to a stable Wi-Fi network and navigate to the 'Update' section on the main menu. Follow the on-screen instructions to download and install the latest software versions. Regular updates ensure compatibility with new vehicle models and access to the latest features.
Image: The FOXWELL NT710's one-click Wi-Fi update feature, simplifying software maintenance.
5.2 Data Sharing and Printing
Diagnostic reports and live data can be saved, shared, and printed directly from the device. This feature allows for easy record-keeping and sharing information with technicians or clients.
Image: The NT710's capability to share and print diagnostic data, facilitating easy record-keeping and communication.
6. Dépannage
If you encounter issues with your FOXWELL NT710, consider the following:
- L'appareil ne s'allume pas : Ensure the device is fully charged or connected to the vehicle's OBD2 port. Check the diagnostic cable for secure connection.
- Erreurs de communication : Verify the diagnostic cable is securely connected to both the device and the vehicle's OBD2 port. Ensure the vehicle's ignition is on. Try restarting both the device and the vehicle.
- Fonction non prise en charge : Some advanced functions may not be supported on all vehicle models or years. Refer to the vehicle coverage list or contact support for specific compatibility.
- Codes d'effacement : It is recommended that all necessary repairs are fully completed before clearing diagnostic codes to ensure vehicle performance and safety.
6.1 Assistance technique à distance
The NT710 offers remote technical support. If you encounter complex issues, you can use this feature to allow a technician to remotely access your device for diagnosis and assistance.
Image: Remote Technical Support feature, showing the process of connecting with a technician for assistance.
7. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Marque | FOXWELL |
| Modèle | NT710 |
| Système opérateur | Android 9.0 |
| Taille de l'écran | 5.5 pouces |
| Poids de l'article | 3.25 livres |
| Dimensions du produit | 4.9 x 1.5 x 9.3 pouces |
| Piles | 1 batterie lithium-ion requise (incluse) |
| Source d'énergie | Alimenté par batterie |
8. Garantie et assistance
FOXWELL stands behind its products. If you receive a defective, used, or damaged item, please contact customer support for prompt resolution. For technical assistance, utilize the remote technical support feature described in section 6.1.
