1. Introduction
This manual provides comprehensive instructions for the safe and effective use of your Seek Thermal Nano 300 thermal camera. The Nano 300 is a high-resolution thermal imaging device designed to connect directly to Apple iOS devices equipped with a USB-C connector (iPhone 15 and newer). It enables users to visualize thermal energy, detect temperature variations, and capture thermal images and videos for various applications, including home maintenance, electrical inspections, and outdoor observation.
Image 1: The Seek Thermal Nano 300 thermal camera, featuring a USB-C connector for direct attachment to compatible Apple iOS devices.
2. Consignes de sécurité
Veuillez lire et comprendre toutes les consignes de sécurité avant d'utiliser l'appareil. Le non-respect de ces consignes peut entraîner des blessures ou endommager l'appareil.
- Do not point the camera directly at intense heat sources, such as the sun or lasers, as this may damage the sensor.
- Gardez l'appareil au sec. Ne l'exposez pas à l'eau ni à une humidité excessive.
- Évitez de faire tomber l'appareil ou de le soumettre à des chocs violents.
- Ne tentez pas de démonter ou de modifier l'appareil. Confiez toute réparation à un personnel qualifié.
- Operate the device within its specified temperature range (-4°F to 626°F / -20°C to 330°C).
3. Contenu du colis
Vérifiez que tous les éléments sont présents dans le colis :
- Seek Thermal Nano 300 Thermal Camera
Image 2: The retail packaging for the Seek Thermal Nano 300, indicating its compatibility and model information.
4. Installation
4.1 Installation de l'application
- Locate the "Seek Nano" application in the Apple App Store on your iPhone.
- Téléchargez et installez l'application.
- Grant necessary permissions when prompted by the app for full functionality.
4.2 Connexion de l'appareil
- Ensure your iPhone is running iOS 15 or newer and has a USB-C port.
- Carefully plug the Seek Thermal Nano 300 camera into the USB-C port of your iPhone.
- The Seek Nano app should automatically launch or prompt you to open it. If not, manually open the app.
- The camera draws power directly from your iPhone and does not require separate charging.
Image 3: An iPhone with the Seek Thermal Nano 300 connected, displaying a thermal view of an electrical panel, highlighting hot spots.
5. Mode d'emploi
5.1 Fonctionnement de base
- Once connected and the app is open, the thermal image will appear on your iPhone screen.
- The camera provides a 320 x 240 resolution thermal image at a 25Hz frame rate for smooth viewing.
- Le vaste champ de view (57° x 42°) allows for comprehensive scene capture.
5.2 Mesure de la température
- The app displays the center spot temperature, as well as the hottest and coldest points within the frame.
- The Nano 300 measures temperatures from -4°F to 626°F (-20°C to 330°C) with an accuracy of ±5%.
- Adjust emissivity settings within the app for more accurate readings on different surfaces.
Image 4: A thermal image of a dog displayed on an iPhone, showing temperature readings at various points.
5.3 Capture d'images et de vidéos
- Tap the camera icon in the app to capture a still thermal image.
- Tap the video icon to start and stop recording thermal video.
- Captured images and videos are saved directly to your iPhone's photo gallery.
- The app also allows for simultaneous viewing of the phone's visual camera image alongside the thermal image for comparison.
5.4 Palettes thermiques
The Seek Nano app offers various thermal palettes to visualize temperature differences. You can select the palette that best suits your application or personal preference.
Image 5: A visual representation of different thermal color palettes available in the Seek Nano application, such as Tyrian, White Hot, Spectra, and Iron.
6. Entretien
- Nettoyage: Gently wipe the camera lens and body with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Stockage: Rangez l'appareil dans un endroit frais et sec lorsqu'il n'est pas utilisé. Évitez les températures extrêmes et l'exposition directe au soleil.
- Mises à jour logicielles : Regularly check the Apple App Store for updates to the Seek Nano app to ensure optimal performance and access to new features.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Camera not recognized by iPhone/App | Loose connection, app not open, incompatible iPhone model. | Ensure the camera is firmly plugged into the USB-C port. Close and reopen the Seek Nano app. Verify your iPhone is a compatible model (iPhone 15 or newer with USB-C). Try unplugging and replugging the camera. |
| Blurry or unclear thermal image | Dirty lens, out of focus (if adjustable), software glitch. | Clean the camera lens with a soft, lint-free cloth. Restart the Seek Nano app. Ensure the camera is pointed at a suitable target within its operational range. |
| Lectures de température inexactes | Incorrect emissivity setting, environmental factors, distance to target. | Adjust the emissivity setting in the app to match the surface being measured. Ensure the camera is within an appropriate distance from the target. Allow the camera to acclimate to the environment if moved from extreme temperatures. |
| L'application plante ou se bloque | Software bug, insufficient phone resources. | Close the app completely and restart it. Ensure your iPhone's operating system and the Seek Nano app are updated to the latest versions. Free up phone memory if necessary. |
8. Spécifications
- Modèle: Nano 300
- Compatibilité: Apple iOS devices with USB-C connector (iPhone 15 and newer)
- Thermal Sensor Resolution: 320 x 240 pixels
- Fréquence d'images : >25 Hz
- Plage de température : -4°F à 626°F (-20°C à 330°C)
- Précision: ±5%
- Domaine de View (FOV) : 57° x 42°
- Sensibilité: <35 mK
- Lentille: 4mm Chalcogenide
- Source d'alimentation : Powered by host device (iPhone)
- Dimensions: Dimensions approximatives : 5.04 x 2.52 x 2.24 pouces (emballage)
- Poids: Environ 0.46 onces (emballage)
Image 6 : Une explosion view illustrating the internal components of the Seek Thermal Nano 300 camera, including the lens and sensor.
9. Garantie et assistance
Seek Thermal products are designed and assembled in the U.S.A. For customer support, technical assistance, or warranty inquiries, please visit the official Seek Thermal website or contact their customer service department. Seek Thermal provides lifetime online customer support for all its products.
Pour plus d'informations, visitez : www.thermique.com
