Introduction
Thank you for choosing the HOFTRONIC Q-Series 120cm LED Batten. This robust and waterproof LED fixture is designed for easy installation and provides efficient, high-quality illumination. It is suitable for a wide range of environments, including basements, garages, workshops, and warehouses. This manual provides essential information for safe installation, operation, and maintenance of your new LED batten.
The Q-Series LED batten features an integrated light source, eliminating the need for separate LED tubes. Its energy-efficient design consumes only 36 watts while delivering 4320 lumens, offering significant energy savings compared to traditional fluorescent fixtures.
Consignes de sécurité
- Sécurité électrique : Installation must be performed by a qualified electrician in accordance with local electrical codes and regulations. Ensure the power supply is disconnected before any installation, maintenance, or repair work.
- Voltage: This fixture operates on 230 Volts. Verify your power supply matches this requirement.
- Manutention: Handle the fixture with care to avoid damage. Do not drop or subject it to excessive force.
- Environnement: The fixture is rated IP65 for water and dust resistance and IK08 for impact protection, making it suitable for both indoor and outdoor use in demanding environments. However, avoid direct exposure to corrosive chemicals unless specifically designed for such conditions.
- Température: Operate the fixture within the specified temperature range of -20°C to +40°C.
- Modifications: Do not attempt to modify or disassemble the fixture. This will void the warranty and may pose a safety risk.
Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- HOFTRONIC Q-Series 120cm LED Batten (with integrated LED light source)
- Mounting clips (stainless steel)
- Vis et chevilles pour la fixation murale
- Quick connection clips
Caractéristiques
| Spécification | Valeur |
|---|---|
| Marque | HOFTRONIC |
| Numéro de modèle | 2711559 |
| Dimensions (L x l x H) | 120 x 5.7 x 4.7 cm |
| Poids | 5 kilogrammes |
| Matériel | Polycarbonate (PC) |
| Consommation d'énergie | 36 watts |
| Flux lumineux | 4320 lumens |
| Température de couleur | 6500 Kelvin (blanc froid) |
| Voltage | 230 volts |
| Indice de protection IP | IP65 (étanche et anti-poussière) |
| Évaluation IK | IK08 (Impact Protection) |
| Durée de vie moyenne | 25,000 hours (approx. 10 years with average use) |
| Caractéristiques spéciales | Plug and Play, Quick Mounting, Linkable (up to 20 units), Flicker-free |
Pour des informations détaillées sur l'efficacité énergétique, veuillez consulter la base de données EPREL :
Informations sur les produits EPREL
Image: Energy efficiency label showing the product's energy class and consumption.
Configuration et installation
Avant de commencer : Assurez-vous que l'alimentation électrique principale est coupée au niveau du disjoncteur.
1. Montage du luminaire
- Determine the desired mounting location on the ceiling or wall.
- Mark the positions for the mounting clips. Use the fixture itself or measure the distance between the clip attachment points.
- Percez des trous aux emplacements marqués et insérez les chevilles.
- Secure the stainless steel mounting clips to the surface using the provided screws.
- Align the LED batten with the mounted clips and press firmly until it clicks into place.
Image: Illustration of the mounting process, showing drilling, securing clips, and attaching the fixture.
2. Connexion électrique
The HOFTRONIC Q-Series LED Batten features a quick connect system for easy wiring.
- Open the quick connect terminal cover at one end of the fixture.
- Connect the live (L), neutral (N), and ground (PE) wires from your power supply to the corresponding terminals. Ensure a secure connection.
- Fermez soigneusement le couvercle du terminal.
Image : détaillée view of the quick connect mechanism for electrical wiring.
3. Linking Multiple Fixtures (Optional)
Up to 20 Q-Series battens can be linked together using the integrated quick connectors and a suitable connecting cable (min. 5mm / max. 9mm diameter, PG11 cable gland compatible).
- After mounting the first fixture and connecting it to the power supply, prepare the connecting cable.
- Insert one end of the connecting cable into the quick connect port of the first fixture.
- Mount the next fixture and insert the other end of the connecting cable into its quick connect port.
- Repeat for additional fixtures, ensuring all connections are secure.
Image: Illustration demonstrating the linking capability of multiple HOFTRONIC Q-Series fixtures.
Once all fixtures are mounted and wired, restore power to the circuit.
Mode d'emploi
The HOFTRONIC Q-Series LED Batten operates immediately upon receiving power. There are no complex controls or settings. Simply switch on the power supply to illuminate the fixture, and switch it off to turn it off.
The fixture provides a diffuse light output, which helps to reduce glare and create a more comfortable lighting environment.
Image: Visual comparison illustrating the diffuse light provided by the HOFTRONIC Q-Series LED Batten.
Entretien
The HOFTRONIC Q-Series LED Batten requires minimal maintenance due to its durable construction and integrated LED technology.
- Nettoyage: Disconnect power before cleaning. Wipe the exterior of the fixture with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the polycarbonate material.
- Inspection: Periodically inspect the fixture for any signs of damage, loose connections, or excessive dirt accumulation. Address any issues promptly.
- Aucune pièce réparable par l'utilisateur : La source lumineuse LED est intégrée et non remplaçable par l'utilisateur. Ne tentez pas d'ouvrir le luminaire.
Dépannage
If you encounter issues with your HOFTRONIC Q-Series LED Batten, refer to the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| L'appareil ne s'allume pas | Pas d'alimentation électrique Connexion de câblage desserrée Fixation défectueuse | Vérifiez le disjoncteur et l'interrupteur mural. Assurez-vous que toutes les connexions électriques sont bien fixées (coupez d'abord le courant). If other solutions fail, contact customer support. |
| Lumière vacillante | Alimentation électrique instable Connexion de câblage desserrée | Vérifiez la stabilité de la source d’alimentation. Verify all wiring connections are tight (power off first). |
| Luminosité réduite | Accumulation de saleté ou de poussière | Clean the fixture's surface (power off first). |
Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client HOFTRONIC.
Garantie et assistance
HOFTRONIC fournit un Garantie de 2 ans for this Q-Series LED Batten, covering defects in materials and workmanship under normal use. This warranty period begins from the date of purchase.
The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or natural disasters.
For warranty claims, technical support, or any questions regarding your product, please contact HOFTRONIC customer service through your retailer or the official HOFTRONIC website. Please have your proof of purchase and model number (2711559) ready when contacting support.
Applications du produit
The HOFTRONIC Q-Series LED Batten is versatile and suitable for a variety of applications, thanks to its robust and waterproof design:
- Industriel: Warehouses, factories, production halls.
- Commercial: Supermarkets, retail spaces, workshops, car repair shops.
- Résidentiel: Garages, basements, utility rooms.
- Spécialisé: Cold storage rooms, car washes, outdoor covered areas.
Image : Examples of the LED batten installed in industrial environments such as car washes, large warehouses, and cold storage facilities.
Image : Examples of the LED batten installed in commercial and residential settings, including supermarkets, workshops, and garages.
Dimensions du produit
Refer to the diagram below for detailed dimensions of the HOFTRONIC Q-Series LED Batten.
Image: Technical drawing illustrating the length (1200mm) and other key dimensions of the LED batten.