User Manual: Tuya Smart ZigBee Energy Meter 80A

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of the Srutueo Tuya Smart ZigBee Energy Meter 80A. This device is designed to monitor electrical parameters such as KWh, voltage, current, and power consumption for both 110V and 240V systems. It integrates with the Tuya Smart or Smart Life application for remote monitoring and control.

2. Produit terminéview

The Srutueo Smart ZigBee Energy Meter consists of the main meter unit and an external Current Transformer (CT) clamp. The meter unit processes the data, while the CT clamp measures the current flowing through the monitored circuit.

Figure 2.1 : Srutueo Tuya Smart ZigBee Energy Meter and Current Transformer (CT) Clamp. The meter unit has input terminals for L, N, S1, and S2, indicating connections for live, neutral, and the CT clamp.

Figure 2.2 : Gros plan view of the Current Transformer (CT) Clamp. This component is designed to be clamped around a live wire to measure current non-invasively.

3. Spécifications

4. Configuration et installation

4.1 Précautions de sécurité

• Ensure power is disconnected from the circuit before installation to prevent electric shock.
• L'installation doit être effectuée par un électricien qualifié si vous n'êtes pas familiarisé avec le câblage électrique.
• Ne pas dépasser le courant nominal maximal de 80 A.

4.2 Schéma de câblage

Follow the diagram below for correct wiring. The meter requires a live (L) and neutral (N) connection for power. The CT clamp wires (S1, S2) connect to the corresponding terminals on the meter. The CT clamp should be installed around the live wire of the load you wish to monitor.

Figure 4.1 : Wiring diagram showing connections for the energy meter. The L and N terminals connect to the main power supply, and the S1/S2 terminals connect to the CT clamp, which encircles the live wire of the load.

1. Connect the Live (L) wire from your power source to the 'L' terminal on the meter.
2. Connect the Neutral (N) wire from your power source to the 'N' terminal on the meter.
3. Connect the red wire of the CT clamp to the 'S1' terminal on the meter.
4. Connect the black wire of the CT clamp to the 'S2' terminal on the meter.
5. Ouvrez le CT clamp and place it around the live wire of the electrical load you intend to monitor. Ensure the clamp est bien fermé.

4.3 Installation et appairage de l'application

This device requires a ZigBee gateway (not included) and the Tuya Smart or Smart Life app for full functionality.

1. Download the "Tuya Smart" or "Smart Life" app from your mobile device's app store (Google Play Store for Android, Apple App Store for iOS).
2. Inscrivez-vous ou connectez-vous à votre compte.
3. Assurez-vous que votre passerelle ZigBee est allumée et connectée à votre réseau Wi-Fi domestique.
4. In the app, tap '+' to add a new device. Select "Add Device" and then choose the appropriate ZigBee device category (e.g., "Energy Meter" or "Sensor").
5. Follow the on-screen instructions to put the energy meter into pairing mode (refer to the device's specific pairing button/procedure if available, typically a long press of a reset button).
6. Once the device is discovered and added, you can rename it and assign it to a room.

5. Mode d'emploi

5.1 Suivi de la consommation d'énergie

Après un appairage réussi, vous pouvez view real-time and historical energy data through the Tuya Smart or Smart Life app.

Figure 5.1 : App interface displaying energy consumption overview, including daily average costs and usage over time.

Figure 5.2 : App interface showing real-time readings for voltage, current, and power consumption of the monitored circuit.

• Ouvrez l'application Tuya Smart ou Smart Life.
• Select your energy meter device from the device list.
• The main screen will display real-time voltagrelevés de courant, d'énergie et de puissance.
• Navigate through tabs or sections to view historical data, daily/weekly/monthly consumption, and energy cost estimates.

5.2 Creating Smart Scenes (Automation)

The app allows you to create automated scenes based on the energy meter's readings, integrating with other smart devices.

Figure 5.3 : App interface for creating smart scenes. This allows setting conditions (e.g., power exceeding a threshold) to trigger actions (e.g., turning off a smart breaker).

• In the app, go to the "Smart" or "Automation" section.
• Tap to create a new "Scene" or "Automation".
• Set a condition (e.g., "When power exceeds 2000W").
• Set an action (e.g., "Turn off Smart Breaker").
• Save the scene. This allows for automatic control of appliances based on energy consumption.

6. Entretien

The Srutueo Smart ZigBee Energy Meter is designed for low maintenance. Follow these guidelines to ensure optimal performance:

• Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de nettoyants abrasifs ni de solvants.
• Environnement: Ensure the device is installed in a dry environment, away from direct sunlight, excessive heat, or moisture. The ambient temperature range is -10°C to 50°C.
• Mises à jour du micrologiciel : Periodically check the Tuya Smart/Smart Life app for any available firmware updates for the device to ensure it has the latest features and security patches.

7. Dépannage

8. Garantie et assistance

For warranty information or technical support, please contact the manufacturer, Srutueo, or your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: Srutueo

For further assistance, please visit the official Srutueo website ou contactez leur service client.