1. Introduction
Thank you for choosing the Sunco LED Shop Light. This manual provides essential information for the safe installation, operation, and maintenance of your new lighting fixture. Please read these instructions thoroughly before installation and retain them for future reference.

Image 1.1: Sunco 4ft LED Shop Light
2. Consignes de sécurité
To reduce the risk of death, personal injury, or property damage from fire, electric shock, falling parts, cuts, abrasions, and other hazards, please read all warnings and instructions included with and on the fixture box and all fixture labels.
- AVERTISSEMENT : Risque de choc électrique. Coupez l'alimentation au niveau du fusible ou du disjoncteur avant toute installation ou intervention.
- AVERTISSEMENT : Risque d'incendie. Conducteurs d'alimentation à température minimale de 90 °C. Consultez un électricien qualifié pour vous assurer du choix du conducteur approprié pour le circuit de dérivation.
- WARNING: Risk of Injury. Portez des lunettes et des gants de sécurité pendant l'installation et l'entretien.
- Ce luminaire est destiné à utilisation en intérieur uniquement. Do not use in wet locations or where directly exposed to water.
- Ce luminaire est non dimmable. Do not connect to a dimmer switch.
- Ne modifiez pas le dispositif. Toute modification peut annuler la garantie et engendrer des risques pour la sécurité.
- Assurer le vol d'alimentationtage is compatible with the fixture (120V-277V).
3. Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- 2 x Sunco LED Shop Light Fixtures
- Mounting Equipment (Surface)
4. Configuration et installation
Follow these steps for a quick and easy setup. Always ensure power is disconnected at the source before proceeding.
- Préparer l'emplacement de montage : Identify the desired ceiling location for the fixture. Ensure the mounting surface is capable of supporting the fixture's weight.
- Installer le matériel de montage : Use the provided mounting equipment to securely attach the fixture housing to the ceiling. Refer to Image 4.1, Step 1.
- Connecter les fils : Carefully connect the electrical wires from the power supply to the fixture's wires. Ensure proper polarity (live to live, neutral to neutral, ground to ground). Refer to Image 4.1, Step 2.
- Fixation sécurisée : Once wiring is complete, snap the fixture into place, ensuring it is firmly seated against the mounting surface. Refer to Image 4.1, Step 3.

Image 4.1 : Étapes d'installation
Daisy Chain Linkability
This fixture features daisy chain linkability, allowing multiple units to be connected for extended lighting coverage. To link fixtures, knock out the designated punch hole on the end of the fixture and connect the wires to the next unit. Ensure the total wattage of linked fixtures does not exceed the circuit's capacity.

Image 4.2: Daisy Chain Connection Point
5. Mode d'emploi
The Sunco LED Shop Light is designed for simple operation and provides instant illumination upon activation.
Selectable Color Temperature (CCT)
Your fixture includes an integrated switch to select between three color temperatures: 4000K (Cool White), 5000K (Daylight), and 6000K (Bright White). Locate the CCT switch on the fixture and slide it to your desired setting before or after installation. The light will turn on instantaneously at the selected color temperature.

Image 5.1: Selectable CCT Options
6. Entretien
The Sunco LED Shop Light is designed for long-lasting performance with minimal maintenance.
- Nettoyage: Assurez-vous que l'appareil est hors tension avant de le nettoyer. Essuyez l'extérieur avec un chiffon doux, sec ou légèrement rêche.amp cloth. Do not use harsh chemicals, abrasive cleaners, or solvents, as these may damage the finish or optical components.
- LED: The integrated LED light source is designed for a long lifespan (50,000 hours) and is not user-replaceable.
7. Dépannage
If you experience issues with your Sunco LED Shop Light, refer to the following common troubleshooting steps:
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas | Pas d'alimentation électrique Câblage incorrect CCT switch not set | Vérifiez le disjoncteur et l'interrupteur mural. Verify all wire connections are secure and correct. Ensure the CCT switch is set to a valid color temperature. |
| La lumière scintille | Alimentation électrique instable Connexion de câblage desserrée | Assurez-vous que l'alimentation électrique est stable et dans la plage de tension spécifiée.tage gamme. Check all wire connections for tightness. |
| La lumière n'est pas aussi brillante que prévu | Réglage CCT incorrect Poussière ou débris sur l'objectif | Adjust the CCT switch to a brighter setting (e.g., 6000K). Clean the lens according to maintenance instructions. |
8. Spécifications
| Marque | Éclairage Sunco |
| Numéro de modèle | WR_PR8-WH-4060K-2PK |
| Dimensions du produit | 48"L x 8.58"l x 2.56"H |
| Quoitage | 60 W |
| Luminosité | 7200 lumens |
| Efficacité | 118 LM / W |
| Température de couleur (CCT) | Selectable 4000K, 5000K, 6000K |
| Voltage | 120V-277V |
| Gradable | Non |
| Utilisation intérieure/extérieure | Uniquement en intérieur |
| Type d'installation | Plafonnier |
| Dossier spécial | Linkable |
| Type de source lumineuse | DIRIGÉ |
| Matériel | Alloy Steel, Polycarbonate |
| Durée de vie moyenne | 50,000 heures |
| Certifications | ETL, FCC, RoHS |
| Nombre d'articles | 2 (Paquet) |
9. Garantie et assistance
Sunco Lighting garantit la qualité de ses produits.
- Garantie: Ce produit est garanti par Garantie d'un an À compter de la date d'achat. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie.
- Assistance clientèle : For technical assistance, troubleshooting, or warranty inquiries, please contact Sunco Lighting customer support. Our knowledgeable support specialists are available to assist you.
Video 9.1: Get to Know Sunco Lighting - Learn about Sunco's commitment to quality and customer satisfaction.