1. Introduction
This manual provides essential information for the safe and efficient operation, installation, and maintenance of your Faber Hood Mojito IN HC SC FL BK 60 Vertical Wall Mounted Chimney. Please read these instructions carefully before using the appliance and retain them for future reference.
2. Consignes de sécurité
- Vérifiez que l'alimentation électrique correspond aux spécifications indiquées sur l'étiquette signalétique.
- L'installation doit être effectuée par un technicien qualifié.
- Do not operate the chimney without filters in place.
- Regular cleaning is crucial to prevent fire hazards from grease accumulation.
- Tenez les enfants éloignés de l'appareil pendant son fonctionnement.
- Ne pas flamber sous la cheminée.
- Disconnect power before any cleaning or maintenance.
3. Produit terminéview
The Faber Hood Mojito IN HC SC FL BK 60 is a vertical wall-mounted kitchen chimney designed for efficient smoke and odor extraction. It features advanced controls and a filterless design for ease of use and maintenance.
Caractéristiques principales :
- Taper: Vertical/Slant Shape, Wall Mounted
- Puissance d'aspiration : 1200 XNUMX m³ / h
- Type de filtre : Filterless, corrosion-resistant single layer filter
- Type de contrôle : Touch Control, Gesture Control, Motion Sensor (On, Off, Speed Switching)
- Vitesses : 3
- Caractéristiques spéciales : AutoClean, 1 LED Lamp, Dual Suction Vents
Image : Terminéview of key features including filter type, control, and suction capabilities.
4. Spécifications
| Spécification | Valeur |
|---|---|
| Numéro de modèle | 325.0710.409 |
| Dimensions (L x l x H) | 60 x 41.5 x 48.5 centimètres |
| Taille | 60 cm (Suitable for 2-4 burner stove) |
| Capacité de débit d'air | 1200 XNUMX m³ / h |
| Niveau de bruit | 58 dB |
| Matériel | Métal |
| Voltage | 230 volts |
| Quoitage | 180 watts |
| Poids de l'article | 14.7 kilogrammes |
| Type de source lumineuse | DIRIGÉ |
| Pays d'origine | Chine |
Image: Detailed dimensions of the chimney for installation planning.
5. Installation
Proper installation is critical for the performance and safety of your chimney. It is highly recommended to have the chimney installed by a certified professional. Refer to the included installation guide for detailed steps.
Vérifications avant l'installation :
- Cabinet Taille: Ensure adequate space between kitchen cabinets for the chimney.
- Largeur: Measure the clear width between cabinets. Common chimney widths are 60 cm, 75 cm, or 90 cm.
- Hauteur: Measure the height from the gas stove to the desired chimney base position. For slant models like this one, the recommended minimum clearance is typically 18-22 inches (45-55 cm) from the cooking surface. Always confirm specific clearance requirements in the detailed installation manual.
- Conduit : Decide between ducted installation (expelling smoke outside) or ductless (using a charcoal filter, purchased separately).
Video: A guide on how to measure your kitchen space for chimney installation, covering width and height considerations for different chimney types.
Image: Illustrates the two primary installation options: ducted, which vents air outside, and ductless, which recirculates filtered air.
6. Fonctionnement
Your Faber chimney offers intuitive controls for a seamless cooking experience.
Panneau de contrôle:
The chimney features a touch control panel, gesture control, and motion sensors for easy operation. The control panel typically includes buttons for power, fan speed adjustment, light, and auto-clean function.
Réglage de la vitesse du ventilateur :
- Use the touch controls or gesture sensors to select one of the three available fan speeds.
- Higher speeds are recommended for heavy cooking or strong odors.
Éclairage:
Press the light button on the touch panel to turn the LED lamp on or off, providing illumination for your cooking area.
Boost Suction:
To enhance airflow instantly, lift the flap on the chimney to maximize suction efficiency during intense cooking.
Image: Demonstrates how to activate the boost suction feature by lifting the chimney flap.
Image: Highlights the Auto Clean function, dual suction vents, and powerful 1200 m³/hr suction.
7. Entretien
Regular maintenance ensures the longevity and optimal performance of your chimney.
AutoClean Function:
The AutoClean feature helps to remove oil and grease particles from the internal components. Activate this function regularly as per the instructions in the detailed manual to maintain efficiency.
Nettoyage du filtre :
Although filterless, the corrosion-resistant single layer filter should be wiped clean periodically to prevent grease buildup. Refer to the full manual for specific cleaning instructions.
Nettoyage extérieur :
Nettoyez les surfaces extérieures avec un chiffon doux et un détergent doux. Évitez les nettoyants abrasifs ou les produits chimiques agressifs qui pourraient endommager la finition.
8. Dépannage
If you encounter any issues, refer to the following common troubleshooting tips before contacting customer support.
Problèmes courants et solutions :
- Chimney not turning on: Check power supply, ensure the plug is securely inserted, and check the circuit breaker.
- Faible puissance d'aspiration : Ensure the flap is fully open for boost suction. Check for any obstructions in the ducting (if ducted). Clean the filter surface.
- Bruit inhabituel : Ensure the chimney is securely mounted. Check for loose parts or obstructions in the fan.
- Les lumières ne fonctionnent pas : Vérifiez si la LED lamp needs replacement (contact service for this).
For persistent issues, please contact Faber customer support.
9. Garantie et assistance
Your Faber Hood Mojito IN HC SC FL BK 60 Chimney comes with comprehensive warranty coverage:
- Garantie du produit : Garantie complète de 2 ans
- Garantie du moteur : 8 Years Warranty on Motor
For installation services, warranty claims, or technical support, please contact Faber customer care at 1800-209-3484.
Image: Faber Protect+ logo, indicating extended warranty and peace of mind.
