1. Introduction
The Alesis Strike Amp 8 MK2 is a high-performance bi-amped speaker designed for electronic drums and multipad instruments. It delivers 2000 watts of peak power, providing clarity and headroom for various performance or rehearsal settings. This manual provides essential information for the proper setup, operation, and maintenance of your Strike Amp 8MK2.
Figure 1: Alesis Strike Amp Tambour 8 MK2-2000W Amp Orateur.
2. Contenu de la boîte
Veuillez vous assurer que tous les éléments énumérés ci-dessous sont présents dans votre colis :
- Grève Amp 8 MK2
- Câble d'alimentation
- Guide de démarrage rapide
- Manuel de sécurité et de garantie
3. Principales caractéristiques
The Alesis Strike Amp 8 MK2 offers several features designed to enhance your electronic drumming experience:
- Puissance de crête de 2000 W : Delivers high-fidelity sound with ampla hauteur sous plafond.
- 8-inch Woofer & HF Compression Driver: Specially voiced for accurate reproduction of acoustic and electronic drum sounds.
- Connectivité Bluetooth 5.0 : Allows wireless audio streaming from mobile devices for practice or backing tracks.
- Positionnement polyvalent : Can be used in wedge, upright, or pole-mounted configurations.
- Entrées combinées doubles : Two XLR + 1/4" inputs with independent volume controls for connecting multiple instruments.
- XLR Direct Output: For sending your mix to a front-of-house system, recording interface, or linking additional speakers.
- Commutateur HPF EQ : Helps cut through muddy stage mixes.
- Interrupteur de mise à la terre : Eliminates unwanted grounding noise.
- Léger et portable : Weighs approximately 21 lbs for easy transport.
Figure 2: The Strike Amp 8 MK2 delivering high power performance for electronic drums.
4. Installation
4.1 Placement physique
The Strike Amp 8 MK2 offers flexible placement options to suit your needs:
- Position du coin : Ideal for use as a floor monitor, directing sound upwards towards the performer.
- Position verticale : Convient à un usage général amplification or when space is limited.
- Monté sur poteau : Can be mounted on a standard speaker pole for wider sound dispersion.
Figure 3: Versatile positioning options for the Strike Amp 8MK2.
4.2 Connexions
Connect your electronic drum kit or other audio sources to the rear panel inputs.
Figure 4 : Connexions et commandes du panneau arrière.
- Connect your drum module's main outputs to the Entrée 1 et/ou Entrée 2 (XLR or 1/4" TRS combo jacks).
- Utilisez le Sortie XLR to link to another Strike Amp 8 MK2 or send the signal to a mixing console.
- Assurez-vous que le câble d'alimentation est correctement connecté au Entrée CA and a grounded power outlet.
Video 1: Demonstrates the setup process for the Alesis drum amp, including connecting inputs and outputs.
4.3 Puissance
Une fois tous les branchements effectués, allumez le Pouvoir button to the ON position. The Power LED will illuminate.
5. Fonctionnement
5.1 Commandes de volume
Ajustez le Tome 1 et Tome 2 knobs to set the desired levels for each input. The Signal Limit LED indicates when the signal is approaching clipping; reduce volume if it frequently lights up.
5.2 Couplage Bluetooth
Pour diffuser de l'audio sans fil depuis un appareil mobile :
- Assurez-vous que le Bluetooth de votre appareil mobile est activé.
- Appuyez sur le Bluetooth button on the Strike Amp 8 MK2's rear panel. The Bluetooth LED will flash, indicating pairing mode.
- Select "Alesis Strike Amp 8 MK2" from your device's Bluetooth settings.
- Once paired, the Bluetooth LED will be solid. You can now stream audio.
Figure 5 : Diffusion Bluetooth depuis un appareil mobile.
5.3 HPF EQ and Ground-Lift Switches
- Commutateur HPF EQ : Activates a High-Pass Filter to reduce low-frequency rumble, which can help clarify the sound in certain environments.
- Interrupteur de mise à la terre : Use this switch to eliminate hum or buzz caused by ground loops. Toggle it to the position that minimizes noise.
Video 2: Demonstrates the sound quality of the Alesis Strike Amp, highlighting its clarity and power.
6. Entretien
To ensure the longevity and optimal performance of your Strike Amp 8MK2 :
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur. Évitez les nettoyants abrasifs et les solvants.
- Stockage: Rangez l'enceinte dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
- Ventilation: Assurez une ventilation adéquate autour de l'appareil pour éviter toute surchauffe. Ne bloquez aucune aération.
- Câble d'alimentation: Always disconnect the power cable from the outlet before cleaning or performing any maintenance.
7. Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| Pas de sortie audio | Power not connected; Volume too low; Input cable faulty; Device not paired (Bluetooth) | Check power connection and switch; Increase volume; Test input cables; Re-pair Bluetooth device. |
| Distorsion ou mauvaise qualité sonore | Volume too high (clipping); Input signal too strong; Faulty cable; HPF EQ setting inappropriate | Reduce volume on speaker or source; Check cables; Adjust HPF EQ switch. |
| Bruit de bourdonnement ou de bourdonnement | Boucle de masse ; interférences provenant d’autres appareils électroniques | Engage the Ground-Lift switch; Move speaker away from other electronic devices. |
| Bluetooth ne se connecte pas | Device too far; Not in pairing mode; Already connected to another device | Ensure device is within range; Put speaker in pairing mode; Disconnect from other devices. |
8. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Poids de l'article | 21.5 livres |
| Dimensions du produit | 9.72"P x 9.96"L x 17.16"H |
| Numéro de modèle de l'article | GRÈVEAMP8MK2 |
| Marque | Alesis |
| Couleur | Noir |
| Appareils compatibles | Tambour électronique |
| Type de connecteur | (1) XLR output (Link), (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced) |
| Puissance de sortietage | 2000 watts |
| Taille du caisson de basses | 8 pouces |
| Source d'énergie | Électrique avec fil |
9. Garantie et assistance
For detailed warranty information and technical support, please refer to the Safety & Warranty Manual included in your product package or visit the official Alesis website.
Online resources and FAQs may also be available at www.alesis.com.
