Manuel d'utilisation du spa gonflable Wave Aegean pour 6 personnes

1. Introduction

Thank you for choosing the Wave Aegean 6-Person Inflatable Hot Tub. This manual provides essential information for the safe and efficient setup, operation, and maintenance of your hot tub. Please read all instructions carefully before installation and use to ensure proper function and longevity of your product.

Image 1.1: The Wave Aegean 6-Person Inflatable Hot Tub in its assembled state.

2. Consignes de sécurité

Respectez toujours les consignes de sécurité suivantes afin d'éviter les blessures ou les dommages :

• Do not permit children to use the hot tub without adult supervision.
• Les femmes enceintes, les personnes souffrant de maladies cardiaques, d'hypertension artérielle, de diabète ou d'autres problèmes de santé doivent consulter un médecin avant d'utiliser le bain à remous.
• Avoid using the hot tub immediately after strenuous exercise.
• The water temperature should not exceed 104°F (40°C). A temperature between 100°F (38°C) and 102°F (39°C) is generally recommended.
• N’utilisez pas le spa s’il est endommagé ou s’il fonctionne mal.
• Ensure the electrical supply meets the product specifications and is protected by a Residual Current Device (RCD).
• Never add water to chemicals; always add chemicals to water to avoid strong fumes or violent reactions.

3. Liste de vérification des composants

Avant de commencer l'installation, vérifiez que tous les composants sont présents :

• Inflatable Hot Tub Liner
• Integrated Heater/Pump Unit
• Top Cover with Safety Clips
• Tuyau de gonflage
• Cartouches filtrantes (2x)
• Filter Covers (2x)
• Trousse de réparation
• Air Valve Cap
• Sac de rangement

Image 3.1: Included accessories such as filters, inflation hose, repair kit, and air valve cap, alongside the wired controller.

4. Instructions de configuration

The Wave Aegean hot tub is designed for a quick setup, typically within 15 minutes.

4.1 Sélection du site

Choose a flat, level surface capable of supporting the weight of the hot tub filled with water and occupants (approximately 240 gallons + 6 people). Ensure the area is free from sharp objects and has access to a suitable electrical outlet with RCD protection.

4.2 Gonflage

1. Unfold the hot tub liner on the selected site.
2. Connect the inflation hose to the hot tub's air valve and the integrated pump unit.
3. Plug in the pump unit and activate the inflation function. Inflate until the hot tub walls are firm to the touch, but not over-inflated.
4. Disconnect the inflation hose and securely close the air valve cap.

4.3 Remplissage d'eau

Fill the hot tub with fresh water using a garden hose. Fill to the recommended water level indicated on the inside of the hot tub liner.

4.4 Installation du filtre

Install the two filter cartridges into their respective housings inside the hot tub, ensuring they are securely threaded. Place the filter covers over them.

Image 4.1: Visual representation of key features including 15-minute tool-free setup, 600W bubble blower, 1350W integrated heater, and 15' waterproof cable with RCD plug.

5. Mode d'emploi

The integrated control unit manages all hot tub functions.

5.1 Fonctions du panneau de commande

The wired controller allows easy management of spa settings:

• Bouton de chauffage : Activates the 1350W integrated heater to warm the water up to 104°F (40°C).
• Bouton bulle : Engages the 130 Aquajet massage system (600W bubble blower).
• Bouton de filtre : Activates the clean performance filtration system.
• Réglage de la température : Use the Up/Down arrows to set your desired water temperature.
• Bouton de minuterie : Set the integrated timer for heating cycles.
• Bouton de verrouillage : Verrouille le panneau de commande pour éviter toute modification accidentelle.

5.2 Protection antigel

The hot tub features an anti-freeze protection system. When the ambient temperature drops below a certain threshold, the heater will automatically activate to prevent water from freezing, protecting the internal components. Ensure the hot tub remains plugged in during cold weather conditions.

6. Entretien

Regular maintenance is crucial for the performance and longevity of your hot tub.

6.1 Système de filtration

The integrated filtration system uses replaceable threaded filters to keep your water clean. Check and clean the filter cartridges regularly (daily or every other day depending on usage) by rinsing them with a garden hose. Replace filters every 1-2 weeks or when they appear worn or discolored.

6.2 Traitement de l'eau

Maintain proper water chemistry using appropriate hot tub chemicals (e.g., sanitizers, pH adjusters). Test the water regularly and adjust chemical levels as needed to ensure safe and clean water.

6.3 Vidange et nettoyage

Drain the hot tub completely every 1-3 months, depending on usage. Clean the interior surface with a soft cloth and mild, non-abrasive cleaner. Rinse thoroughly before refilling.

7. Dépannage

Cette section aborde les problèmes courants que vous pourriez rencontrer.

7.1 Hot Tub Not Heating

• Ensure the heater button is activated on the control panel.
• Check that the desired temperature is set higher than the current water temperature.
• Verify that the power supply is stable and the RCD has not tripped.
• Ensure filter cartridges are clean and not obstructing water flow.

7.2 Fuites d'eau

• Inspect all connections between the hot tub liner and the pump unit for tightness.
• Check the hot tub liner for any visible punctures or damage. Use the provided repair kit for minor leaks.
• Ensure the air valve cap is securely closed.

7.3 Codes d'erreur

If an error code appears on the control panel (e.g., 'HL' for high limit), consult the specific error code section in the full manual or contact customer support for assistance.

8. Spécifications

9. Garantie et assistance

Your Wave Aegean Hot Tub is covered by a manufacturer's warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the warranty card included with your product or visit the official WAVE website. For technical support, troubleshooting assistance, or to order replacement parts, please contact WAVE customer service through their official channels.