Introduction
The Cherub WST-675 CAB Tuner is a modern, rechargeable clip-on tuner designed for various musical instruments. It features a clear display and multiple tuning modes to ensure accurate pitch for your instrument. This manual provides detailed instructions for its setup, operation, maintenance, and troubleshooting.
This image displays the front of the Cherub WST-675 CAB Tuner, highlighting its clear digital display. The display shows tuning information, including the note being played, deviation from the target pitch, and the A4 reference frequency. The tuner's compact design and clip mechanism are visible.
Installation
Charging the Tuner
- Repérez le port de chargement USB-C sur le tuner.
- Connect the included USB-C charging cable to the tuner and a compatible USB power source (e.g., computer USB port, USB wall adapter).
- The battery indicator on the display will show charging status. A full charge typically provides approximately 10 hours of operating time.
Attaching to Your Instrument
- Gently open the clip mechanism of the tuner.
- Attach the tuner securely to the headstock of your guitar, bass, ukulele, or other stringed instrument. Ensure the piezo sensor makes good contact with the instrument for accurate vibration detection.
- Ajustez l'angle d'affichage pour une performance optimale viewing.
Here, the Cherub WST-675 CAB Tuner is shown in practical use, clipped securely to the headstock of an acoustic guitar. The display is illuminated, indicating a note is being tuned, with a green light suggesting the string is in tune. This illustrates how the tuner attaches and provides visual feedback during tuning.
Mode d'emploi
Marche/Arrêt
- Pour allumer, appuyez et maintenez le Power/SEL button located on the back of the tuner.
- Pour mettre hors tension, maintenez la touche Power/SEL button again. The tuner also features an automatic shut-off function to conserve battery power after a period of inactivity.
Selecting Tuning Modes
- Appuyez sur le Power/SEL button briefly to cycle through the available tuning modes:
- Chromatic (C): For tuning any instrument to any note.
- Guitare (G): Standard guitar tuning.
- Guitar with Compensation (GC): An exclusive mode for guitar tuning that accounts for harmonic nuances during play.
- Basse (B): Standard bass tuning.
- Ukulele (U): Standard ukulele tuning.
Adjusting Reference Pitch (A4)
- Appuyez sur le ADJ button to adjust the A4 reference pitch. The range is typically from 431 Hz to 449 Hz.
Accordage plat
- In Guitar or Bass modes, you can use the ADJ button to select flat tuning options (b, bb, bbb) if desired.
Accorder votre instrument
- Pincez une seule corde de votre instrument.
- L'écran affichera le nom de la note et un indicateur précisant si la note est bémol, dièse ou juste.
- Adjust your instrument's tuning peg until the needle on the display is centered and the indicator light turns green (or similar 'in-tune' indication).
The back of the Cherub WST-675 CAB Tuner is shown, featuring the 'ADJ' button for adjustments and the 'Power/SEL' button for power and mode selection. The model number 'WST-675 CAB TUNER' is printed clearly, along with a small reset pinhole. This view is essential for understanding button functions.
Entretien
Nettoyage
- Essuyez l'accordeur avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni de produits abrasifs.
Entretien de la batterie
- Pour prolonger la durée de vie de la batterie, évitez de la décharger complètement et fréquemment. Rechargez-la dès que le témoin de batterie faible s'allume.
- If storing the tuner for an extended period, ensure it has a partial charge (around 50%) and recharge it every few months.
Stockage
- Rangez l'accordeur dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
Dépannage
Tuner Does Not Power On
- Ensure the battery is charged. Connect the tuner to a USB power source using the provided cable.
- Appuyez et maintenez enfoncé le Power/SEL bouton pendant quelques secondes.
Inaccurate Tuning
- Check that the tuner is securely clipped to the instrument's headstock, ensuring good contact for vibration detection.
- Verify that the correct tuning mode (Chromatic, Guitar, Bass, Ukulele) is selected for your instrument.
- Ensure there is no excessive background noise that might interfere with the tuner's sensor.
- Try resetting the tuner by inserting a small pin into the reset pinhole on the back.
L'écran ne répond pas
- Rechargez la batterie.
- Perform a reset using the pinhole.
Caractéristiques
| Numéro de modèle | WST-675 |
| Plage de réglage | La0 (27.5 Hz) à C8 (4186.0 Hz) |
| Modes de réglage | Chromatic, Guitar (Standard), Guitar (with compensation), Bass, Ukulele |
| Méthode de détection | Piezo sensor (fixed and flexible pliers) |
| Accordage plat | b, bb, bbb |
| Pas de référence | A4 = 431 to 449 Hz |
| Précision d'accord | ± 1 cent |
| Alimentation électrique | Rechargeable Li-ion battery (3.7V, 180mAh) |
| Durée de fonctionnement | Environ 10 heures |
| Connecteurs | USB-C pour le chargement |
| Dimensions | 49 x 26 x 40 mm |
| Poids de l'article | 2.82 onces |
| Couleur | Gris |
Informations sur la garantie
Cherub products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cherub webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.
Assistance clientèle
If you encounter any issues or have questions regarding your Cherub WST-675 CAB Tuner that are not covered in this manual, please contact Cherub customer support. You can typically find contact information on the official Cherub websur le site ou auprès de votre revendeur.
