Driftalia queen size

Manuel d'instructions du cadre de lit LED Queen Driftalia

Model: Queen Size (U.S. Standard)

Marque : Driftalia

Introduction

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Driftalia LED Queen Bed Frame. This bed frame features integrated LED lighting, a convenient charging station, and two storage drawers, designed to enhance your bedroom's functionality and aesthetic. Please read this manual thoroughly before assembly and use to ensure proper setup and safe operation.

Driftalia LED Queen Bed Frame with Headboard and Storage Drawers

Image: The Driftalia LED Queen Bed Frame in light grey, showcasing the headboard with integrated LED lighting, charging station, and two pull-out storage drawers at the foot of the bed.

Consignes de sécurité

Pour votre sécurité et afin d'éviter d'endommager le produit, veuillez respecter les consignes suivantes :

Contenu du colis

Before beginning assembly, verify that all components listed below are present and undamaged. All pieces are clearly marked for easy identification.

Diagram showing dimensions and components of the bed frame, including headboard, frame, slats, and storage drawers.

Image : Une explosion view diagram illustrating the various components of the bed frame, including the headboard, frame, wooden slats, and storage drawers, along with key dimensions and the 1000 lbs weight capacity.

Configuration et assemblage

Assembly of the Driftalia LED Queen Bed Frame typically takes approximately 50 minutes with two people. Illustrated instructions are included with your product to guide you through each step. Ensure you have adequate space and the necessary tools (an Allen wrench is usually provided, a drill with a T30 bit may expedite the process).

  1. Déballez tous les composants et disposez-les sur une surface propre et douce pour éviter les rayures.
  2. Begin by assembling the headboard, connecting the main sections and installing the LED strip and charging station according to the detailed instructions.
  3. Fixez les longerons à la tête et au pied de lit, en vous assurant que toutes les fixations sont bien serrées.
  4. Install the central support beam and the metal support legs.
  5. Lay the wooden slats across the frame. The bed frame is designed with 12 straight wood slats and 3 thickened metal slats for optimal support.
  6. Assemble the two storage drawers and slide them into place at the foot of the bed. Note that these drawers are designed to be free-standing under the bed, not fixed to the frame.
  7. Une fois le cadre assemblé, assurez-vous que toutes les fixations sont bien serrées et que le cadre est stable avant d'y placer votre matelas.
Close-up images showing sturdy structure, easy assembly, no noise features, and solid foot pads of the bed frame.

Image : détaillée views highlighting the sturdy metal structure, easy assembly features with hook and loop closure wood slats, noise-reducing EVA mute bars, and solid foot pads designed to prevent floor scratching.

Mode d'emploi

Système d'éclairage à DEL

The integrated LED lighting system offers customizable ambiance for your bedroom. It supports 12 scene modes, 3 speed adjustments, and 3 brightness modes. Control the lights using the provided remote control.

Image showing the LED bed frame with various light colors and a remote control for smart control.

Image: The bed frame illuminated with purple LED lights, demonstrating the smart controller and remote for adjusting 7 colors, music modes, and 3 brightness levels.

Borne de Recharge

The headboard features a built-in charging station with 20W fast charging ports (3.0 Type-A & Type-C), providing up to 5V/4A max output for efficient charging. A 6.6ft long power supply cord is included.

Close-up of the charging station with AC outlets, USB-A, and USB-C ports.

Image : Une image détaillée view of the integrated charging station, showing two 110/12A AC outlets, one 5V/3A USB-A port, and one 5V/3A USB-C port, along with information about the 6.5-foot power cord.

Tiroirs de rangement

The bed frame includes two large storage drawers at the foot of the bed, each measuring 21.0"L x 15.4"W x 4.7"H. These drawers provide convenient space for bed sheets, clothing, or other items.

Image showing the two large storage drawers pulled out from the bed frame.

Image : Un gros plan view of the two large storage drawers, partially pulled out from beneath the bed frame, demonstrating their capacity for storing items like clothing and bedding.

Entretien

Un entretien régulier contribuera à prolonger la durée de vie et à préserver l'apparence de votre cadre de lit :

Dépannage

If you encounter any issues with your Driftalia LED Queen Bed Frame, refer to the following common troubleshooting steps:

ProblèmeCause possibleSolution
Le cadre du lit est bancal ou grince.Fixations desserrées ; assemblage irrégulier.Ensure all screws and bolts are securely tightened. Verify that the frame is assembled on a level surface.
Les lumières LED ne fonctionnent pas.Power connection issue; remote control battery dead; LED strip disconnected.Check if the power cord for the LED system is properly plugged in. Replace the remote control battery. Ensure the LED strip is securely connected to its power source.
La borne de recharge ne fournit pas d'énergie.Bed frame not plugged in; device not compatible; faulty cable.Verify the bed frame's main power cord is securely plugged into a working wall outlet. Ensure your device and charging cable are functional and compatible with the charging station's output.
Les tiroirs de rangement sont difficiles à ouvrir/fermer.Overloaded; obstruction; uneven floor.Reduce the weight or volume of items in the drawers. Check for any objects obstructing the drawer path. Ensure the bed frame is on a level surface.

Caractéristiques

FonctionnalitéDétail
TailleReine (norme américaine)
Dimensions du produit (L x l x H)62.99" x 16.73" x 8.07" (Note: These dimensions appear to be for the package or a component, not the full assembled bed frame. Actual assembled dimensions for a Queen bed frame are typically around 80"L x 60"W.)
Dossier spécialPas besoin de sommier
CouleurGris clair
Type de finitionInachevé
Composants inclusBoîte de rangement
Taille de matelas compatibleReine
MarqueDriftalia
Finition des meublesGris
Assemblage requisOui
FabricantDriftalia
Code UPC850062367036 723314193731
Facteur de formeTaille Queen
Poids de l'article83.8 livres (38 kg)
Numéro de modèle de l'articlequeen size
Capacité de poids maximale1000 livres (453 kg)

Note: Product dimensions provided in specifications may refer to packaging or specific components. Refer to assembly diagrams for overall assembled dimensions.

Garantie et assistance

Your Driftalia LED Queen Bed Frame is eligible for a 30-day easy return policy through Amazon.com. For any product-related inquiries, technical assistance, or to report missing/damaged parts, please contact Driftalia customer support via the Amazon platform or through the contact information provided with your purchase documentation.

For additional protection, 2-Year and 3-Year Protection Plans may be available for purchase separately.

Visitez le Driftalia Store on Amazon Pour plus d'informations et découvrir nos produits.

Documents connexes - queen size

Préview Instructions de montage du cadre de lit LED King Size Driftalia
Guide de montage étape par étape du cadre de lit Driftalia LED King Size. Ce manuel couvre l'installation du cadre de lit, y compris les tiroirs de rangement, la tête de lit avec station de charge et l'éclairage LED. Assurez-vous que toutes les pièces sont présentes avant de commencer le montage.
Préview Latitude Run Queen Size Upholstered Bed Frame Assembly Instructions
Detailed assembly instructions for the Latitude Run Queen Size Upholstered Bed Frame. This guide provides a complete parts list, hardware inventory, packing details, and step-by-step visual descriptions to help you build your bed frame efficiently. Designed for easy setup with no box spring required.
Préview Instructions de montage du cadre de lit Ivy Bronx pour lit simple avec lumières LED
Guide d'assemblage complet pour le cadre de lit Ivy Bronx (taille simple). Ce manuel fournit des instructions étape par étape, une liste détaillée des pièces et les spécifications de la quincaillerie nécessaires à l'assemblage du lit plateforme avec éclairage LED intégré, station de charge et tiroirs. Sommier non requis.
Préview Bed Frame-T Assembly Instructions - Latitude Run
Comprehensive assembly instructions for the Latitude Run Bed Frame-T. This guide provides step-by-step instructions, component lists, and hardware details for easily assembling your floating bed frame with LED lighting and charging station, featuring an upholstered headboard with folding shelves and metal slats. No box spring required. Designed for noise-free, easy assembly.
Préview Latitude Run 2625Q Queen Size Bed Frame Assembly Instructions
Step-by-step guide for assembling the Latitude Run 2625Q Queen Size Upholstered Bed Frame. Includes parts list, hardware details, and assembly steps. No box spring needed.