1. Produit terminéview
The Subsonic SA5632 DualSense Controller Charging Station is designed to efficiently charge up to two Sony PS5 DualSense controllers simultaneously. Its compact design ensures easy storage and integration into your gaming setup. The station connects directly to your console via the included USB-C cable and features an intelligent chip for enhanced safety during charging.
2. Contenu du colis
Veuillez vérifier que tous les éléments énumérés ci-dessous sont inclus dans votre colis :
- 1 x Subsonic DualSense Controller Charging Station
- 1 x USB-C Charging Cable (80 cm)
3. Installation
Follow these steps to set up your Subsonic DualSense Controller Charging Station:
- Connectez le câble d'alimentation : Insert one end of the provided USB-C cable into the charging port on the back of the charging station. Connect the other end of the USB-C cable to a compatible USB port on your PS5 console or a USB wall adapter (not included).
- Placement: Place the charging station on a stable, flat surface near your PS5 console. Its compact design allows for convenient placement.
- Attach Controllers: Align your PS5 DualSense controllers with the charging ports on the station and gently slide them into place. Ensure they are securely seated for proper connection.
4. Mode d'emploi
The charging station is designed for simple and intuitive operation:
- Charge initiale : Once controllers are correctly placed on the station and the station is powered, charging will begin automatically.
- Indicateurs de charge : The station features LED indicators to show the charging status. The lights will glow orange while the controllers are charging.
- Indication de charge complète : When a controller is fully charged, the corresponding LED indicator will turn blue.
- Temps de charge : A single PS5 DualSense controller typically takes approximately 2.5 to 3 hours to fully charge from empty.
5. Consignes de sécurité
The Subsonic DualSense Controller Charging Station is equipped with an intelligent chip to protect your controllers and the charging station itself. This includes protection against:
- Surintensité
- Court-circuit
- Survoltage
- Surchauffe
Always ensure the charging station is placed on a stable surface and away from liquids or excessive heat sources.
6. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Numéro de modèle | SA5632 |
| Dimensions du produit | 5.31 x 2.36 x 1.18 pouces |
| Poids de l'article | 2.19 onces |
| Matériel | Plastique |
| Type de connecteur | USB-C |
| Appareils compatibles | Sony DualSense controllers for PS5 |
| Nombre total de ports USB | 2 |
| Quoitage | 100 watts |
| Volume de sortietage | 5 volts |
7. Dépannage
- Controllers not charging:
- Ensure the USB-C cable is securely connected to both the charging station and the power source (PS5 console or wall adapter).
- Vérifiez que la source d’alimentation est active.
- Check if the controllers are correctly seated in the charging slots.
- Essayez d’utiliser un autre port USB ou un autre adaptateur secteur.
- Les voyants LED ne fonctionnent pas :
- Confirm the charging station is receiving power.
- Ensure controllers are properly connected.
- Charge lente :
- Ensure the power source provides sufficient output (e.g., a dedicated wall adapter might charge faster than a console USB port).
- Avoid using excessively long or low-quality USB-C cables.
8. Entretien
Pour garantir la longévité et les performances optimales de votre borne de recharge :
- Gardez l'appareil propre en l'essuyant avec un chiffon doux et sec.
- Avoid exposing the charging station to water or other liquids.
- N'essayez pas de démonter ou de réparer l'appareil vous-même.
- Conserver dans un endroit frais et sec lorsqu'il n'est pas utilisé.
9. Garantie et assistance
For warranty information or technical support, please refer to the contact details provided with your product packaging or visit the official SUBSONIC webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.
