Informations importantes sur la sécurité
Veuillez lire et comprendre toutes les instructions avant de commencer l'installation. Le non-respect de ces instructions peut entraîner un choc électrique, un incendie ou d'autres dangers susceptibles de causer des blessures ou des dommages matériels.
- Débrancher l'alimentation : Always turn off power at the circuit breaker before installing, servicing, or removing the fixture.
- Électricien qualifié : L'installation doit être effectuée par un électricien qualifié ou par une personne connaissant bien la construction et le fonctionnement du produit ainsi que les risques associés.
- Mise à la terre : Assurez-vous que le luminaire est correctement mis à la terre afin d'éviter tout risque d'électrocution.
- Damp Emplacement évalué : Ce luminaire convient pour damp locations, such as bathrooms and showers, but not for direct water exposure.
- Compatibilité: Use only with 120 VAC power supply. Do not attempt to modify the fixture.
- Chaleur: LED fixtures generate heat. Allow adequate ventilation around the fixture.
Produit terminéview
The Maxxima MRL-61505 is a 5-inch and 6-inch retrofit recessed anti-glare LED downlight designed for easy installation into existing recessed can housings. It offers 1300 lumens of illumination and features 5 selectable color temperatures, ranging from warm white to daylight, to suit various lighting preferences. The fixture is dimmable and includes an E-26 quick connect adapter for convenient setup.
Caractéristiques principales :
- Efficacité énergétique : 15W LED equivalent to 100W incandescent light, reducing energy consumption.
- Haute luminosité: Provides 1300 lumens with an anti-glare design.
- 5 CCT sélectionnables : Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight) using a switch on the fixture.
- Gradable : Compatible with most standard LED dimmers, offering a dimming range of 10% to 100%.
- Indice de rendu des couleurs élevé (IRC) : 90 CRI ensures accurate color appearance.
- Construction durable : Made with a cast aluminum body for lightweight and robust performance.
- Conception antiéblouissante : Smooth baffle deep recessed trim minimizes glare.
Figure 1 : Face avant view of the Maxxima Retrofit Recessed LED Downlight, showing the anti-glare design and E-26 adapter.
Figure 2 : Angulaire view of the downlight, illustrating the mounting springs for installation into a recessed can.
Vidéo 1 : Un overview of the Maxxima Retrofit Anti-Glare LED Downlight, demonstrating its features and selectable color temperatures.
Configuration et installation
Follow these steps to properly install your Maxxima LED Downlight:
- Couper l'alimentation : Before starting, ensure the power to the existing recessed can fixture is turned off at the circuit breaker.
- Remove Existing Trim: Carefully remove the existing bulb and trim from the recessed can.
- Connect E-26 Adapter: Connect the E-26 quick connect adapter (provided) to the fixture's wiring. Then, screw the E-26 adapter into the existing socket of the recessed can.
- Sélectionnez la température de couleur (CCT) : Locate the CCT selection switch on the back of the downlight. Choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K) by sliding the switch.
- Installer un spot encastré : Gently push the wiring and the E-26 adapter into the recessed can. Compress the spring clips on the sides of the downlight and insert the fixture into the can. Release the clips to secure the downlight flush against the ceiling.
- Restaurer l'alimentation : Une fois le spot encastré correctement installé, rétablissez le courant au niveau du disjoncteur.
Figure 3: Illustration of connecting the E-26 quick connect adapter to the downlight's wiring.
Figure 4 : Arrière view of the downlight, highlighting the CCT selection switch.
Figure 5 : Détaillé view of the CCT switch, showing the five color temperature options.
Conseils d'installation :
- Tension du ressort : If the light does not stay flush, ensure the spring clips are properly engaged with the torsion clips inside the recessed can. Some older cans may require adjustment or the use of compatible mounting clips.
- Wire Clearance: Verify that internal wires within the can are not obstructing the downlight, which could prevent it from seating properly.
Mode d'emploi
The Maxxima LED Downlight is designed for simple operation once installed.
Sélection de la température de couleur :
The color temperature is set using the switch on the back of the fixture during installation. To change the CCT after installation, you must carefully remove the fixture from the recessed can, adjust the switch, and then reinstall it. The available color temperatures are:
- 2700 K : Blanc doux
- 3000 K : Blanc chaud
- 3500 K : Blanc brillant
- 4000 K : Blanc neutre
- 5000 K : Lumière du jour
Figure 6: Visual guide to the five selectable color temperatures provided by the downlight.
Fonctionnalité de gradation :
This downlight is dimmable from 10% to 100% with compatible LED dimmers. Ensure your dimmer switch is rated for LED lighting to achieve optimal performance and avoid flickering or damage.
Entretien
Le luminaire encastré à DEL Maxxima nécessite un entretien minimal.
- Nettoyage: Pour nettoyer le luminaire, assurez-vous qu'il est hors tension. Utilisez un chiffon doux, sec ou légèrement rêche.amp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electrical components.
- Aucun remplacement d'ampoule : This fixture features an integrated LED, meaning no bulb replacement is necessary throughout its lifespan.
Dépannage
Si vous rencontrez des problèmes avec votre spot encastré, consultez les problèmes et solutions courants suivants :
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas. | No power, loose connection, faulty fixture. | Check circuit breaker. Verify E-26 adapter is securely screwed in and connections are tight. If problem persists, contact customer support. |
| La lumière vacille ou faiblit de manière anormale. | Incompatible dimmer, loose wiring. | Ensure dimmer is LED compatible. Check all electrical connections. |
| Light does not sit flush with the ceiling. | Spring clips not engaged, internal obstruction, insufficient spring tension. | Ensure spring clips are fully engaged with the can's torsion clips. Check for wires or insulation obstructing the fixture. Adjust spring tension if necessary by gently bending the springs closer together at the top. |
| Température de couleur incorrecte. | Commutateur CCT mal réglé. | Remove fixture, adjust CCT switch to desired setting, and reinstall. |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Nom du modèle | LMR-61505 |
| Marque | Maxime |
| Dimensions du produit | 7.1"L x 7.1"l x 4.5"H |
| Quoitage | 15 watts |
| Luminosité | 1300 lumens |
| Température de couleur | 2700K/3000K/3500K/4000K/5000K Selectable |
| CRI | 90 |
| Voltage | 120 Volts (CA) |
| Gradable | Oui (10 % - 100 %) |
| Angle du faisceau | 36° |
| Matériel | Aluminium |
| Type d'installation | Flush Mount (Retrofit for 5" & 6" cans) |
| Culot de l'ampoule | E26 Quick Connect Adapter |
| Durée de vie | 50,000 heures |
| Certifications | ETL Listed, T20 California Compliant |
| Poids de l'article | 1.5 livres |
| Utilisation intérieure/extérieure | Intérieur (Damp (Évalué) |
Informations sur la garantie
The Maxxima MRL-61505 LED Downlight comes with a Garantie de 3 ans from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.
Assistance clientèle
For technical assistance, troubleshooting, or warranty inquiries, please contact Maxxima customer support. Refer to the product packaging or the official Maxxima website pour les informations de contact les plus récentes.
