Koda LM030404-2

KODA Multi-Directional Shop Light (2 Pack)

Modèle : LM030404-2

Introduction

Thank you for choosing the KODA Multi-Directional Shop Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new LED shop lights. Please read these instructions thoroughly before use and retain them for future reference.

Consignes de sécurité

Respectez toujours les consignes de sécurité de base lors de l'installation ou de l'utilisation de produits électriques afin de réduire les risques d'incendie, d'électrocution et de blessures.

  • Débrancher l'alimentation : Ensure power is turned off at the circuit breaker before installation, maintenance, or cleaning.
  • Mise à la terre appropriée : Ce dispositif doit être correctement mis à la terre.
  • Électricien qualifié : Si vous avez des doutes concernant le processus d'installation, consultez un électricien qualifié.
  • Utilisation en intérieur uniquement : Ce produit est conçu pour une utilisation en intérieur, dans des endroits secs. Ne pas exposer à l'eau ni à l'humidité.
  • Température de fonctionnement : Do not operate in temperatures outside the specified range.
  • Évitez l’exposition directe des yeux : Ne fixez pas directement la source lumineuse LED lorsqu'elle est allumée.
  • Linkable Limit: Do not exceed the maximum linkable limit of 6 fixtures.

Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

  • 2 x KODA Multi-Directional LED Shop Lights
  • Installation Kit (includes hanging chains, S-hooks, V-hooks, mounting screws, wall anchors)
  • 2 x 5 ft. Power Cords with ON/OFF Pull Chains

Produit terminéview

The KODA Multi-Directional Shop Light provides versatile and powerful illumination for various environments. Key features include:

  • Éclairage ultra lumineux : Delivers 8000 lumens of light.
  • Selectable Lighting Modes: Choose between Full Brightness, Main Light, or Ambient Lighting.
  • Conception connectable : Connect up to 6 fixtures in series.
  • Montage polyvalent : Supports both surface and suspended mounting.
  • Efficacité énergétique : Energy Star Certified, consuming only 80 watts.
  • Longue durée: LED components have a lifespan of up to 50,000 hours.
Two KODA Multi-Directional Shop Lights, white, suspended by chains.

This image displays two KODA Multi-Directional Shop Lights, showcasing their sleek, rectangular design and how they are typically suspended from a ceiling by chains.

Configuration et installation

The KODA Multi-Directional Shop Light can be installed using either suspended or surface mounting methods. Ensure power is disconnected before installation.

Suspended Mounting (Recommended for Garages/Workshops)

  1. Marquer les points de montage : Determine the desired location for your light fixture. Mark two points on the ceiling or overhead structure that align with the mounting holes on the fixture.
  2. Installer des crochets de plafond : Drill pilot holes at the marked points. Insert wall anchors if mounting into drywall. Screw the ceiling hooks (V-hooks) into the anchors or directly into a sturdy structure.
  3. Attacher les chaînes : Connect the hanging chains to the V-hooks on the ceiling and the S-hooks on the fixture. Adjust chain length to achieve the desired hanging height.
  4. Connecter l'alimentation : Plug the 5 ft. power cord into a standard 120V AC outlet.

Montage en surface

  1. Marquer les points de montage : Hold the fixture against the desired mounting surface (ceiling or wall) and mark the locations for the mounting screws.
  2. Percer des trous pilotes : Drill pilot holes at the marked locations. Use wall anchors if mounting into drywall.
  3. Fixation sécurisée : Align the fixture with the pilot holes and secure it using the provided mounting screws.
  4. Connecter l'alimentation : Plug the 5 ft. power cord into a standard 120V AC outlet.

Linking Multiple Fixtures

Up to 6 KODA Multi-Directional Shop Lights can be linked in series. To link fixtures:

  1. Ensure all fixtures are securely mounted.
  2. Connect the power cord of the first fixture to an outlet.
  3. Use the provided linking cable (if applicable, or an additional power cord) to connect the convenience outlet on the first fixture to the power input of the second fixture.
  4. Répétez l'opération pour les luminaires supplémentaires, jusqu'à un maximum de 6.
KODA Shop Lights illuminating a well-equipped workshop with various tools and machinery.

Un surcoût view of a workshop, brightly lit by multiple KODA Multi-Directional Shop Lights, demonstrating their effectiveness in providing ample illumination for a detailed work environment.

KODA Shop Lights installed in a garage above storage cabinets and a workbench.

A garage interior featuring KODA Multi-Directional Shop Lights installed above a workbench and storage cabinets, illustrating their application in a typical home garage setting.

Mode d'emploi

Once installed and powered, operate your KODA Multi-Directional Shop Light as follows:

  • Marche/Arrêt : Use the integrated pull chain to turn the light fixture ON or OFF.
  • Sélectionner les modes d'éclairage : The pull chain also cycles through the available lighting modes. Each pull will switch to the next mode:
    • Pleine luminosité : Both main and ambient lights are active for maximum illumination (8000 lumens).
    • Lumière principale : Primary light source is active.
    • Éclairage ambiant : Secondary light source is active, providing softer illumination.
A person wearing safety glasses working on wood under a KODA Multi-Directional Shop Light.

This image shows an individual focused on a woodworking task, with a KODA Multi-Directional Shop Light providing clear, direct illumination over the workspace, highlighting the light's utility in task-oriented settings.

Entretien

The KODA Multi-Directional Shop Light requires minimal maintenance due to its long-lasting LED components.

  • Nettoyage: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry, or slightly damp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
  • LED: The LED components are integrated and not user-replaceable. With a lifespan of up to 50,000 hours, frequent replacement is not necessary.
  • Inspection: Periodically inspect the power cord and hanging hardware for any signs of damage or wear. Replace damaged components immediately.

Dépannage

If you encounter issues with your KODA Multi-Directional Shop Light, refer to the following common problems and solutions:

ProblèmeCause possibleSolution
La lumière ne s'allume pasNo power to the outlet; Power cord not fully plugged in; Circuit breaker tripped; Pull chain not activated.Check the power outlet with another device; Ensure power cord is securely plugged in; Reset the circuit breaker; Pull the chain to activate the light.
La lumière scintille ou diminueLoose connection; Voltage fluctuations; Overloaded circuit.Check all connections; Ensure the fixture is on a stable power supply; Reduce the number of devices on the circuit.
Cannot change lighting modesPull chain mechanism issue.Ensure the pull chain is being pulled firmly and released completely. If the issue persists, contact support.
Linked fixtures not workingLinking cable not properly connected; Exceeded maximum linked fixtures.Verify all linking cables are securely connected; Ensure no more than 6 fixtures are linked in series.

Caractéristiques

Numéro de modèleLM030404-2
MarqueKoda
Type de source lumineuseLED (diode électroluminescente)
Luminosité8000 lumens
Quoitage80 watts
Voltage120 Volts (CA)
MatérielAluminium
CouleurBlanc
FormeRectangulaire
Type de montageCeiling Mount (Suspended or Surface)
Durée de vieJusqu'à 50,000 XNUMX heures
CertificationsCertifié Energy Star
Code UPC840010304046
Diagram showing dimensions of the KODA Multi-Directional Shop Light: 46 inches (116.80 cm) length, 4.37 inches (4.30 cm) width, 2.24 inches (5.70 cm) height.

A technical diagram providing the precise measurements of the KODA Multi-Directional Shop Light, including its length, width, and height in both inches and centimeters, essential for installation planning.

Informations sur la garantie

Specific warranty details for the KODA Multi-Directional Shop Light may vary. Please refer to the product packaging or the official Koda website for the most current warranty policy. Retain your proof of purchase for any warranty claims.

Soutien

For further assistance, technical support, or inquiries regarding your KODA Multi-Directional Shop Light, please visit the official Koda store or contact Koda customer service.

Koda Store: Visit the Koda Store on Amazon

Documents connexes - LM030404-2

Préview Lampe d'atelier LED multidirectionnelle KODA ultra-lumineuse 8000 lumens - Instructions d'entretien et d'utilisation
Instructions détaillées d'entretien, d'utilisation et d'installation pour le luminaire d'atelier LED multidirectionnel KODA (modèle LM030315) de 8 000 lumens. Ce guide inclut les consignes de sécurité, le contenu de l'emballage, les procédures d'installation (suspension au plafond et montage encastré), les modes de fonctionnement, la maintenance, le dépannage et les informations relatives à la garantie.
Préview Lampe d'atelier directionnelle moderne KODA LM030630 - Instructions d'entretien et d'utilisation
Instructions complètes d'entretien, d'utilisation, d'installation et de sécurité pour le luminaire d'atelier directionnel moderne KODA, modèle LM030630. Comprend les spécifications du produit, le dépannage et les informations sur la garantie.
Préview Lampe d'atelier LED mince Koda 46" connectable avec détecteur de mouvement et télécommande - Instructions d'entretien et d'utilisation
Guide complet pour la lampe d'atelier LED mince Koda 46" connectable : fonctionnalités, sécurité, installation, commande à distance, entretien, dépannage et garantie. Inclut un capteur intelligent, une télécommande et la possibilité de connecter plusieurs lampes.
Préview Instructions d'entretien et d'utilisation du projecteur à détecteur de mouvement KODA
Instructions complètes d'entretien et d'utilisation du projecteur à détecteur de mouvement KODA (modèle : LM030599). Ce guide contient des informations importantes sur la sécurité, le contenu de l'emballage, la procédure d'installation, les réglages de fonctionnement, les fonctions de commande manuelle et des conseils de dépannage pour une performance et une sécurité optimales.
Préview Guide d'installation et d'entretien du projecteur de sécurité LED à détection de mouvement KODA LM030022
Instructions complètes d'entretien et d'utilisation du projecteur de sécurité LED à détection de mouvement KODA (modèle LM030022), y compris les procédures d'installation, le fonctionnement, le dépannage et les informations sur la garantie.
Préview Projecteur solaire LED à détecteur de mouvement KODA (LM030212) - Éclairage extérieur lumineux et écoénergétique
Guide complet du projecteur solaire LED à détecteur de mouvement KODA (modèle LM030212). Découvrez l'installation, le fonctionnement, l'entretien, le dépannage et les caractéristiques techniques de cette solution d'éclairage extérieur écoénergétique.