1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ELUTENG M.2 NVMe/SATA SSD Enclosure. This device is designed to convert M.2 NVMe or SATA SSDs into a portable external storage solution, offering high-speed data transfer and broad compatibility.
2. Contenu du colis
Veuillez vérifier que tous les articles sont présents dans votre colis :
- ELUTENG M.2 NVMe/SATA SSD Enclosure
- 2-in-1 USB Type-C Cable (USB-C to USB-A and USB-C to USB-C)
- Coussin thermique
- Manuel de l'utilisateur (ce document)
3. Spécifications
| Fonctionnalité | Description |
|---|---|
| Modèle | M.2 SATA/NVME Enclosure |
| Interface | USB 3.2 Gen 2 Type-C |
| Taux de transfert de données | Up to 10Gbps (NVMe SSD), Up to 5Gbps (SATA SSD) |
| Types de SSD pris en charge | M.2 NVMe M Key / B+M Key, M.2 NGFF SATA B+M Key |
| Tailles de SSD prises en charge | 2230, 2242, 2260, 2280 |
| Capacité maximale | 4 To |
| Jeu de puces | RTL9210B (Supports UASP, Trim) |
| Matériel | Alliage d'aluminium |
| Dimensions | Environ 4.92 x 2.83 x 0.67 pouces |
| Poids | Environ 60 grammes (2.12 once) |
| Compatibilité du système d'exploitation | Windows 7/8/10/11, Mac OS, Linux, iOS, Android |
| Compatibilité des appareils | PC, Smartphone, Tablet, Smart TV, Smart Router, PS4 |
4. Guide de configuration
Installation du SSD 4.1
Suivez ces étapes pour installer votre SSD M.2 dans le boîtier :
- Ouvrez le boîtier : Push the switch on the side of the enclosure and slide out the inner frame.
- Insérer un SSD : Carefully insert your M.2 NVMe or SATA SSD into the slot on the inner frame, aligning it with the card position. Ensure the SSD is fully seated.
- SSD sécurisé : Install the provided fixing buckle (plastic push-pin) to secure the SSD in place. Rotate it 90 degrees counter-clockwise to lock.
- Appliquer le tampon thermique : Place the thermal pad onto the SSD chips to aid in heat dissipation.
- Enceinte fermée : Slide the inner frame back into the aluminum alloy shell until it clicks securely into place.
4.2 Connexion à un appareil
Use the included 2-in-1 USB Type-C cable to connect the enclosure to your computer or other compatible device. The cable supports both USB-C to USB-A and USB-C to USB-C connections.
Note: For optimal performance, ensure your device has USB 3.0 or higher USB ports.
5. Mode d'emploi
5.1 Transfert de données
Once connected, your operating system should automatically detect the ELUTENG M.2 SSD Enclosure as an external storage device. You can then drag and drop files, ou utilisez les fonctions de votre système file outils de gestion pour le transfert de données.
- Disque SSD NVMe : Supports transfer rates up to 10Gbps.
- SSD SATA : Supports transfer rates up to 5Gbps.
The enclosure utilizes the RTL9210B main control chip, supporting UASP (USB Attached SCSI Protocol) and Trim commands to enhance read/write efficiency and reduce CPU load.
Compatibilité SSD 5.2
The enclosure supports a wide range of M.2 SSDs:
- NVMe SSDs: M Key and B+M Key.
- SATA SSDs: B+M Key (NGFF).
- Tailles : 2230, 2242, 2260, and 2280 form factors.
6. Entretien
6.1 Dissipation thermique
The ELUTENG M.2 SSD Enclosure features an aluminum alloy shell and a bottom heat sink hole design. This construction facilitates efficient heat transfer away from the SSD, preventing overheating and maintaining optimal performance during extended use.
6.2 Nettoyage
To clean the enclosure, use a soft, dry cloth. Avoid using liquid cleaners or solvents, as these may damage the finish or internal components.
7. Dépannage
- Boîtier non détecté :
- Assurez-vous que le SSD est correctement installé et fixé dans le boîtier.
- Essayez de connecter le boîtier à un autre port USB de votre appareil.
- Essayez avec un autre câble USB si possible.
- Vérifiez que le SSD est fonctionnel en le testant si possible sur un autre appareil compatible.
- For new SSDs, ensure they are initialized and formatted in your operating system's Disk Management (Windows) or Disk Utility (Mac OS).
- Vitesses de transfert lentes :
- Ensure you are connected to a USB 3.0 (or higher) port on your device. Older USB 2.0 ports will significantly limit speeds.
- Confirm that your SSD is an NVMe drive for 10Gbps speeds; SATA drives will operate at up to 5Gbps.
- Fermez les autres applications susceptibles de consommer des ressources système ou des E/S disque.
- Check the health of your SSD.
- L'enceinte chauffe :
- It is normal for the aluminum alloy shell to become warm during operation, especially during heavy data transfers, as it is designed to dissipate heat from the SSD.
- Ensure the thermal pad is correctly placed on the SSD chips.
8. Vidéos officielles du produit
Video: M.2 NVME SSD USB Adapter SSD Enclosure. This video provides a visual overview of the ELUTENG M.2 NVME SSD USB Adapter Enclosure, demonstrating its features and design.
Video: ELUTENG M.2 NVME SATA SSD Enclosure Aluminum. This video showcases the aluminum design and dual NVME/SATA compatibility of the ELUTENG M.2 SSD Enclosure.
9. Informations sur la garantie
ELUTENG products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact ELUTENG customer support.
10. Assistance
If you encounter any issues or have questions regarding your ELUTENG M.2 NVMe/SATA SSD Enclosure, please contact our customer support team. Contact information can typically be found on our official website ou sur l'emballage du produit.
