HUANUO HNCM9 Monitor Arm Instruction Manual

Introduction

Merci pour votre achatasing the HUANUO HNCM9 Monitor Arm. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your monitor arm. Please read this manual thoroughly before installation and keep it for future reference.

Consignes de sécurité

Consignes de sécurité importantes :

• Avant l'assemblage, assurez-vous que tous les composants sont présents et en bon état. Ne pas utiliser si des pièces sont manquantes ou défectueuses.
• This monitor arm is designed for monitors between 13 and 32 inches and weighing up to 10 kg (22 lbs). Do not exceed the maximum weight capacity.
• Verify that your monitor supports VESA mounting patterns of 75x75mm or 100x100mm.
• The desk surface must be strong enough to support the combined weight of the monitor arm and your monitor.
• Pour clamp installation, the desk thickness should be between 10-80mm. For grommet installation, the desk thickness should be between 10-70mm.
• Always tighten all screws securely. Do not overtighten to avoid stripping threads.
• Tenir les enfants et les animaux domestiques à l'écart pendant l'installation. Les petites pièces peuvent présenter un risque d'étouffement.
• If you have any questions or encounter difficulties, please contact HUANUO customer support.

Before Purchase Checklist

Avant de procéder à l'installation, veuillez confirmer les points suivants :

• Your monitor size is between 13 and 32 inches.
• The combined weight of your monitor and any accessories is within 10 kg (22 lbs).
• Your monitor supports VESA standards 75mm x 75mm or 100mm x 100mm.
• Your desk thickness is compatible with the chosen installation method:
• Grommet mount: 10-70mm thick desktop.
• Cl-Camp mount: 10-80mm thick desktop.

Image: Monitor compatibility and VESA standards.

Installation

The HUANUO HNCM9 Monitor Arm offers two installation methods: Clamp Mount and Grommet Mount. Choose the method best suited for your desk.

1. CLamp Installation du support

This method attaches the arm to the edge of your desk without drilling holes.

1. Attachez le C-clamp base to the bottom of the pole.
2. Position the pole assembly at the desired location on your desk edge.
3. Serrer le C-clamp Vissez jusqu'à ce que le bras soit solidement fixé au bureau. Assurez-vous qu'il est stable et ne vacille pas.

2. Installation du support à œillet

This method provides a more secure fixation by utilizing an existing or newly drilled hole in your desk.

1. If your desk does not have a grommet hole, drill a hole of appropriate diameter (refer to your product manual for exact size, typically 10-70mm) at the desired location.
2. Assemble the grommet base components with the pole.
3. Insert the pole assembly through the grommet hole.
4. Secure the base from underneath the desk using the provided bolt and plate, tightening until firm.

3. Fixation du moniteur

1. Fixez la plaque VESA à l'arrière de votre moniteur à l'aide des vis appropriées.
2. Slide the monitor (with VESA plate attached) onto the arm's mounting head.
3. Secure the monitor to the arm using the locking mechanism or screws as indicated in the specific product diagram.

Image: Monitor arm with long pole, showing height adjustment.

Ajustements et fonctionnement

The HUANUO HNCM9 Monitor Arm offers extensive adjustability to achieve an ergonomic viewexpérience de travail.

Réglage de la hauteur

The monitor arm features a long pole of approximately 99cm, allowing for significant height adjustment. This enables comfortable viewing positions for both sitting and standing work. To adjust the height, loosen the clamp on the pole, slide the arm to the desired height, and then re-tighten the clamp en toute sécurité.

Angle and Direction Adjustment

• Inclinaison: The screen can be tilted approximately 90° up and 90° down.
• Pivot: The screen can swivel approximately 180° (90° left and 90° right).
• Rotation: The monitor can be rotated 360° for portrait or landscape orientation.
• Arm Joints: The second joint allows 360° rotation, and the first joint can be adjusted by 115°.
• Mouvement vers l'avant/vers l'arrière : The arm can be moved forward to bring the screen closer or pushed back against the wall to maximize desk space.

Image: Wide range of motion for tilt, swivel, and rotation.

Gestion des câbles

The monitor arm includes integrated cable management features to keep your workspace tidy. Route your monitor cables through the clips or channels along the arm and pole to conceal them, reducing clutter and creating a cleaner aesthetic.

Image: Monitor arm creating a spacious and organized desk.

Entretien

• Vérifiez régulièrement le serrage de toutes les vis et fixations. Resserrer si nécessaire.
• Nettoyez le bras du moniteur avec un chiffon doux et sec.amp Chiffon. Évitez les nettoyants abrasifs ou les solvants.
• Do not lubricate any parts of the arm unless specifically instructed by the manufacturer.

Dépannage

Caractéristiques

Image: Robust structure supporting up to 10 kg.

Garantie et assistance

HUANUO products are designed for durability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official HUANUO website. Please have your model number (HNCM9) and purchase date ready when contacting support.