BELL Moto-9S Flex Helmet User Manual

1. Introduction

The BELL Moto-9S Flex Helmet is engineered for riders seeking advanced protection and performance. Rooted in Bell's commitment to the sport, this helmet incorporates pro-level safety features and technology. Its design focuses on dispersing impact energy and reducing rotational forces through proprietary Flex Technology, ensuring a secure and adaptive fit for various head shapes. The helmet also provides superior ventilation and includes exclusive features like Magnefusion magnetic cheek pads for enhanced usability.

Figure 1.1 : Face avant view of the BELL Moto-9S Flex Helmet. This image displays the BELL Moto-9S Flex Helmet, showcasing its overall design and the Gloss Slayco 24 White/Black color scheme. The helmet features a prominent visor and ventilation ports.

2. Principales caractéristiques

• Exclusive Magnefusion magnetic strap keeper for secure fastening.
• Exclusive Magnefusion Emergency Removal System magnetic cheek pads for easy removal and cleaning.
• Flex Energy Management Technology, a three-layer impact liner with multiple densities of material, designed to strategically disperse impact energy and reduce rotational energy transfer.
• X-Static XT2 removable liner for comfort and hygiene.
• Fiberglass Composite shell construction for durability and protection.
• EPS-lined chin bar for additional impact absorption.
• DOT approved and meets the FMVSS 218 Standard for safety compliance.

Figure 2.1: Chin bar and ventilation detail. A detailed view of the helmet's front, focusing on the chin bar and the integrated ventilation system designed for optimal airflow.

Figure 2.2 : Côté profile with graphics. This image presents the side profile of the helmet, emphasizing its aerodynamic shape and the distinctive flame graphics in white and black.

3. Installation

3.1 Déballage et inspection

Carefully remove the helmet from its packaging. Inspect the helmet thoroughly for any signs of damage that may have occurred during shipping. Do not use the helmet if any damage is observed.

3.2 Réglage de la visière

The helmet's visor can be adjusted to your preferred position for optimal visibility and sun protection. To adjust, locate the side screws on the visor, loosen them slightly, position the visor as desired, and then securely retighten the screws. Ensure the visor is firmly in place before riding.

3.3 Cheek Pad Installation/Removal

The Magnefusion magnetic cheek pads are designed for easy removal and installation, facilitating cleaning or replacement. To remove, gently pull the pads away from the helmet shell. To reattach, align the magnets on the pads with their corresponding points inside the helmet and press firmly until they click into place.

4. Utilisation du casque

4.1 Port du casque

Place the helmet on your head, ensuring it fits snugly and comfortably without excessive pressure points. The helmet should not move freely when you shake your head. A proper fit is crucial for safety and comfort.

4.2 Strap Fastening

Secure the chin strap using the Magnefusion magnetic strap keeper. Ensure the strap is tightened sufficiently to prevent the helmet from coming off in the event of an impact, but not so tight as to cause discomfort or restrict breathing. The magnetic keeper provides a quick and secure closure.

4.3 Contrôle de la ventilation

The Moto-9S Flex Helmet is equipped with multiple ventilation ports. These vents can be opened or closed to regulate airflow through the helmet, allowing you to adjust for varying riding conditions and personal comfort preferences.

5. Entretien

5.1 Nettoyage de la coque

To clean the exterior shell of your helmet, use a soft cloth dampened with mild soap and water. Gently wipe the surface. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the helmet's finish and structural integrity.

5.2 Liner Care

The X-Static XT2 removable liner can be detached for washing. Refer to the care instructions label on the liner for specific washing guidelines. Typically, hand washing with mild soap and cold water is recommended. Allow the liner to air dry completely before reinstalling it into the helmet.

5.3 Visor Cleaning

Nettoyez la visière avec un chiffon doux et sec.amp cloth and mild soap. Do not use window cleaners, abrasive pads, or harsh chemicals, as these can scratch or damage the visor's coating and clarity.

5.4 Stockage

Store your helmet in a cool, dry place, away from direct sunlight, extreme temperatures, and sources of heat. Using a helmet bag can help protect it from dust and scratches when not in use.

6. Dépannage

6.1 Helmet Feels Too Tight or Loose

Ensure you have selected the correct helmet size. While the Flex Technology liner adapts to various head shapes, an incorrect base size will compromise both safety and comfort. Refer to the BELL sizing guide for proper measurement and fit. If the helmet is too loose, it may shift during riding; if too tight, it can cause discomfort and headaches.

6.2 Bruit de vent excessif

Check that all ventilation ports are properly closed if you desire reduced airflow and noise. Ensure the visor is fully closed and securely sealed against the helmet shell. Improperly sealed visors or open vents can contribute to increased wind noise.

6.3 Difficulty Removing Cheek Pads

The Magnefusion magnetic cheek pads are held in place by strong magnets. When removing them, apply firm, even pressure to pull them directly away from the helmet shell. Avoid twisting or prying, which could damage the pads or the helmet's interior.

7. Spécifications

For detailed sizing information, please refer to the official BELL sizing guide.

8. Garantie et assistance

For comprehensive warranty information, details on product registration, and access to customer support, please visit the official BELL website. It is recommended to retain your proof of purchase, such as a receipt or invoice, as it may be required for any warranty claims or service requests.

9. Consignes de sécurité

This BELL Moto-9S Flex Helmet is DOT approved and meets the FMVSS 218 Standard, indicating it has passed rigorous safety tests. Always wear appropriate safety gear, including eye protection, when riding. Never modify your helmet in any way, as this can compromise its protective capabilities and void its safety certifications. It is crucial to replace your helmet after any impact, even if visible damage is not apparent, as the helmet's protective structure may have been compromised internally.

Mentions légales

Cet article est conforme à la norme fédérale américaine de sécurité des véhicules automobiles 218 (FMVSS 218) (certifié DOT FMVSS n° 218).