1. Introduction
The Qolsys IQIDP-PG IQ Smart Plug PowerG is designed to convert a standard plug-in light or small appliance into a smart PowerG device. This smart outlet enables remote On/Off control via PowerG wireless technology and can be integrated into various PowerG automated scenes. It also functions as a PowerG signal repeater to extend the range of your smart home system.
1.1. Contenu du colis
- IQ Smart Plug
- Manuel d'utilisation
1.2. Produit terminéview
Figure 1 : Face avant view of the Qolsys IQ Smart Plug. This image displays the front of the Qolsys IQ Smart Plug, featuring a standard three-prong electrical outlet. The compact design allows it to fit discreetly into wall outlets.
2. Configuration et installation
Follow these steps to install and integrate your Qolsys IQ Smart Plug into your PowerG network.
- Mise sous tension : Plug the IQ Smart Plug into a standard 120V AC wall outlet. Ensure the outlet is easily accessible.
- Association avec le panneau de contrôle : The IQ Smart Plug is compatible with PowerG enabled IQ Panel 4, IQ4 Hub, and IQ4 NS Panels running V4.4.1 and higher, and IQ PRO panels running V4.3.0n and higher. Refer to your control panel's manual for specific instructions on adding a PowerG device. Typically, this involves putting the panel into 'add device' mode and then activating the smart plug (e.g., by pressing its local button or plugging it in).
- Connexion de l'appareil : Plug the light or small appliance you wish to control into the IQ Smart Plug's outlet.
Figure 2: IQ Smart Plug installed in a wall outlet. The Qolsys IQ Smart Plug is shown plugged into the lower receptacle of a standard duplex wall outlet. Its compact form factor ensures that the upper receptacle remains accessible for other devices.
3. Fonctionnement
Once installed and paired, the IQ Smart Plug offers several methods of control:
- Télécommande: Use your compatible Qolsys control panel or associated mobile application to remotely turn the connected device On or Off.
- Contrôle local: A built-in button on the IQ Smart Plug allows for manual On/Off control of the connected device directly at the outlet.
- Automated Scenes and Routines: Integrate the IQ Smart Plug into custom automated scenes or scheduled routines through your Qolsys control panel. This allows for automatic control based on time, events, or other smart home triggers.
- PowerG Signal Repeater: The IQ Smart Plug extends the range of your PowerG network by repeating signals, enhancing communication reliability for other PowerG devices.
4. Entretien
The Qolsys IQ Smart Plug requires minimal maintenance. Observe the following guidelines:
- Utilisation en intérieur uniquement : This device is designed for indoor use exclusively. Do not expose it to moisture, extreme temperatures, or outdoor elements.
- Nettoyage: Disconnect the plug from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or aerosols.
- Capacité de charge: Do not exceed the maximum load capacity of 1800W (15A) for the connected appliance.
5. Dépannage
If you encounter issues with your IQ Smart Plug, consider the following:
- L'appareil ne répond pas :
- Ensure the smart plug is securely plugged into a live outlet.
- Verify the connected appliance is functioning correctly when plugged directly into a standard outlet.
- Check the status indicator on the smart plug (if available) for any error signals.
- Cannot Pair with Control Panel:
- Confirm your control panel is in 'add device' mode.
- Ensure the smart plug is within the wireless range of your PowerG control panel.
- Vérifiez la présence d'obstacles susceptibles de perturber le signal sans fil.
- Consult your control panel's manual for specific PowerG device pairing instructions.
- Connectivité intermittente :
- Relocate the smart plug to a more central location to improve signal strength.
- Ensure there are no large metal objects or other wireless devices causing interference nearby.
If problems persist, contact Qolsys customer support for further assistance.
6. Spécifications
| Référence fabricant | IQIDP-PG |
| Protocole | PowerG |
| Radio Fréquence | 912-919 MHz |
| Portée sans fil | Up to 2000 ft line of sight |
| Alimentation électrique | 120V à 60Hz |
| Power Output (Resistive Load) | 1800 W, 120 V |
| Maximum Load (Resistive Load) | 15A total for one outlet |
| Consommation d'énergie en veille | ≤1W (standby mode) |
| Température de fonctionnement | 32°F à 104°F (0°C à 40°C) |
| Température de stockage | -4°F à 140°F (-20°C à 60°C) |
| Humidité opérationnelle | 10%-90% HR, sans condensation |
| Dimensions | 2.6 po x 1.5 po x 1.3 po (68 mm x 38 mm x 33 mm) |
| Poids | 0.14 lb (64 grammes) |
| Couleur | Blanc |
7. Garantie et assistance
7.1. Informations sur la garantie
The Qolsys IQIDP-PG IQ Smart Plug PowerG comes with a Garantie limitée de 1 ans from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the official Qolsys warranty policy or contact customer support.
7.2. Assistance clientèle
For technical assistance, troubleshooting, or warranty claims, please contact Qolsys customer support. Visit the official Qolsys website contenant des informations de contact et des ressources supplémentaires.
