LEVN LM101

Manuel d'utilisation du système de microphone cravate sans fil LEVN

Modèle: LM101 | Marque : LEVN

1. Introduction

Thank you for choosing the LEVN Wireless Lavalier Microphone System. This system is designed to provide high-quality audio recording for various applications, including video recording, streaming, voice recording, speech, and video conferencing. It features advanced noise cancellation, extended battery life, and broad compatibility with multiple devices.

This manual provides detailed instructions for setting up, operating, and maintaining your microphone system. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

2. Contenu de la boîte

Upon unpacking your LEVN Wireless Lavalier Microphone System, please verify that all the following components are present:

  • Deux (2) émetteurs (TX): These are the microphones that capture audio.
  • Two (2) Receivers (RX): These units connect to your recording device.
  • Un (1) étui de chargement: Used for charging and storing the transmitters and receivers.
LEVN Wireless Lavalier Microphone System components
Image: The LEVN Wireless Lavalier Microphone System, showing the charging case with two transmitters and two receivers.

3. Produit terminéview

The LEVN Wireless Lavalier Microphone System consists of compact and portable units designed for ease of use and high-fidelity audio capture.

Émetteur (TX)

  • Microphone intégré
  • Bouton d'alimentation/appairage
  • Noise Cancellation button
  • Voyant d'état
  • Built-in clip for attachment

Récepteur (RX)

  • USB Type-C or Lightning connector (depending on model)
  • Voyant d'état
  • Charging port (for pass-through charging of host device)

Étui de chargement

  • Charging slots for TX and RX units
  • Affichage numérique du niveau de batterie
  • Port de charge USB-C pour le boîtier
LEVN Wireless Lavalier Microphone System components in detail
Image : détaillée view of the LEVN Wireless Lavalier Microphone system, highlighting the individual transmitter, receiver, and charging case.

4. Installation

Follow these steps to set up your LEVN Wireless Lavalier Microphone System for first use.

4.1 Charge initiale

  1. Place both transmitters (TX) and receivers (RX) into the charging case.
  2. Connectez le boîtier de charge à une source d'alimentation à l'aide d'un câble USB-C (non inclus).
  3. The digital display on the charging case will show the battery level. Ensure all units are fully charged before first use. A full charge takes approximately 1.5 hours.

4.2 Appairage des appareils

The transmitters and receivers are typically pre-paired at the factory. If pairing is lost or if you are pairing for the first time:

  1. Remove the TX and RX units from the charging case. They will automatically power on.
  2. The indicator lights on both TX and RX will flash, indicating they are searching for a connection.
  3. Once successfully paired, the indicator lights on both units will turn solid.

4.3 Connexion à votre appareil

  1. Plug the receiver (RX) directly into the USB Type-C or Lightning port of your smartphone, tablet, or PC.
  2. Ensure the receiver is securely connected. Your device should recognize the external microphone automatically.
LEVN Wireless Lavalier Microphone connected to various devices
Image: The LEVN Wireless Lavalier Microphone receiver connected to a smartphone, tablet, and laptop, demonstrating extensive device compatibility.

5. Mode d'emploi

5.1 Mise sous/hors tension

  • Mise sous tension: Remove the TX and RX units from the charging case. They will power on automatically. Alternatively, press and hold the Power button on the TX unit for 3 seconds.
  • Éteindre: Place the TX and RX units back into the charging case. They will power off automatically. Alternatively, press and hold the Power button on the TX unit for 3 seconds.

5.2 Enregistrement audio

  1. Ensure the receiver is connected to your recording device and the transmitters are powered on and paired.
  2. Clip the transmitter(s) to your clothing, ideally within 6-8 inches of your mouth, for optimal sound capture.
  3. Ouvrez votre application d'enregistrement audio ou vidéo préférée sur votre appareil.
  4. Start recording. The system will capture audio wirelessly through the transmitters.

5.3 Suppression du bruit

The LEVN system features AI Noise Cancelling Technology to reduce ambient background noise.

  • To activate Noise Cancellation: Press the dedicated Noise Cancellation button on the transmitter (TX) unit. The indicator light may change color or pattern to confirm activation.
  • To deactivate Noise Cancellation: Press the Noise Cancellation button again.
AI Noise Cancelling Technology graphic
Image: A graphic representation of AI Noise Cancelling Technology, showing sound waves being filtered around the microphone units.

5.4 Surveillance audio

Some receivers may offer a pass-through charging port which can also be used for real-time audio monitoring with headphones, depending on your device's capabilities and the receiver's design. Consult your device's manual for external audio monitoring options.

6. Caractéristiques et capacités

6.1 Connexion à deux appareils

The system supports independent dual device connection, allowing two transmitters to record simultaneously to a single receiver, capturing audio from multiple sources.

Independent Dual Device Connection in use
Image: Two individuals using the LEVN wireless lavalier microphones, each connected to a separate smartphone, demonstrating independent dual device connection.

6.2 Autonomie prolongée de la batterie

The transmitters offer up to 20 hours of continuous recording on a single charge. The charging case provides additional charges, extending the total operational time.

Powerful Battery Life graphic
Image: A visual representation of the microphone system's powerful battery life, indicating 20 hours of recording and less than 1.5 hours charging time.

6.3 Portée sans fil

The system provides a stable 2.4G wireless connection with an operational range of up to 60 meters (approximately 200 feet) in open, unobstructed environments.

Wireless range demonstration
Image: A person skiing in a snowy landscape, with a smartphone in the foreground, illustrating the wireless range of up to 60 meters (196.8 inches).

6.4 Large compatibilité

The receiver is compatible with a wide range of devices, including iPhones (15/14/13/12 series), Android smartphones, and personal computers, via USB Type-C or Lightning connectors.

iOS and Android Compatibility
Image: The LEVN wireless microphone system connected to a laptop and a smartphone, demonstrating compatibility with both iOS and Android devices.

7. Entretien

Proper maintenance ensures the longevity and optimal performance of your LEVN Wireless Lavalier Microphone System.

  • Nettoyage: Use a soft, dry cloth to clean the exterior of the transmitters, receivers, and charging case. Avoid using harsh chemicals or abrasive materials.
  • Stockage: When not in use, store all components in the charging case to protect them from dust, moisture, and physical damage. Store in a cool, dry place.
  • Entretien de la batterie: For optimal battery health, avoid fully discharging the units frequently. If storing for an extended period, charge the units to approximately 50% capacity.
  • Évitez les conditions extrêmes: Do not expose the devices to extreme temperatures, direct sunlight, or high humidity.

8. Dépannage

If you encounter issues with your LEVN Wireless Lavalier Microphone System, refer to the following troubleshooting guide:

ProblèmeCause possibleSolution
Aucun enregistrement audioReceiver not connected properly; TX/RX not paired; TX unit powered off or low battery; Device not recognizing external mic.Ensure RX is fully inserted into device. Check TX/RX indicator lights for pairing status. Charge TX units. Restart recording device and application.
Mauvaise qualité audio / StatiqueInterference; TX too far from RX; Obstructions; Low battery.Move closer to the receiver. Ensure no major obstructions. Avoid areas with strong wireless interference. Charge units.
La réduction du bruit ne fonctionne pas.Fonctionnalité non activée.Press the Noise Cancellation button on the TX unit to activate.
Les appareils ne chargent pasCharging case low battery; Poor connection in charging slot; Faulty cable/adapter.Charge the charging case. Ensure TX/RX units are correctly seated in their slots. Try a different USB-C cable and power adapter.
Portée sans fil courteObstructions ; interférences environnementales.Operate in open environments. Minimize physical obstructions between TX and RX.

If the problem persists after attempting these solutions, please contact LEVN customer support for further assistance.

9. Spécifications

Detailed technical specifications for the LEVN Wireless Lavalier Microphone System (Model LM101).

  • Numéro de modèle:LM101
  • Facteur de forme du microphone: Lavalier
  • Diagramme polaire: Omnidirectionnel
  • Nombre de canaux: 2
  • Signal-to-Noise Ratio: 78 dB
  • Technologie sans fil: 2.4 G
  • Plage de fonctionnement: Up to 60 meters (200 feet) in open areas
  • Source d'énergie: Alimenté par pile
  • Type de batterie: Lithium Polymère
  • Nombre de batteries: 2 (inclus)
  • Autonomie de la batterie (TX): Up to 20 hours of recording
  • Temps de charge (boîtier): Approximately <1.5 hours
  • Connector Type (RX): USB Type-C (compatible with iPhone 15/Android/PC) or Lightning (compatible with iPhone 12/13/14)
  • Appareils compatibles: Personal Computer, Smartphone (iOS and Android)
  • Couleur: Noir
  • Poids de l'article: 3.84 ounces (0.11 Kilograms)
  • Dimensions du colis: 4.45 x 3.23 x 1.34 pouces
  • Utilisations recommandées: Video Recording, Streaming, Voice Recording, Speech, Video Conference

10. Garantie et assistance

LEVN products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please refer to the warranty card included with your product or visit the official LEVN website.

For direct support, you may contact LEVN customer service through the contact information provided on the official website ou votre plateforme d'achat.

Documents connexes - LM101

Préview Manuel d'utilisation du casque Bluetooth LEVN CT001
Manuel d'utilisation du casque Bluetooth LEVN CT001, couvrant l'installation, les fonctionnalités, les FAQ et les informations sur la garantie.
Préview Manuel d'utilisation du casque sans fil LEVN O3 Open Ear - Casque Bluetooth WSG-O3
Manuel d'utilisation du casque ouvert LEVN O3 (modèle : WSG-O3) de SKY WING Communication Electronics Co., Ltd. Les caractéristiques comprennent les spécifications du produit, le mode d'emploi, le couplage Bluetooth, la double connexion, les instructions d'utilisation, la charge, les voyants LED et la conformité FCC.
Préview Manuel d'utilisation de l'émetteur et du récepteur Bluetooth BTI-020V
Manuel d'utilisation du BTI-020V, un appareil Bluetooth tout-en-un polyvalent combinant émetteur et récepteur. Découvrez ses caractéristiques techniques, son fonctionnement en tant qu'émetteur et récepteur, l'appairage et le dépannage.