Aigostar SSP-Microwave Sensor-G

Aigostar Solar Outdoor Light (Model SSP-Microwave Sensor-G) Instruction Manual

Introduction

Thank you for choosing the Aigostar Solar Outdoor Light. This manual provides essential information for the safe and efficient operation of your solar light. Please read it thoroughly before installation and use, and retain it for future reference.

This 50W LED solar light features a motion sensor, remote control, IP65 waterproof rating, and adjustable color temperature. It is designed for outdoor use, providing illumination for gardens, fences, and other outdoor areas.

Consignes de sécurité importantes

Contenu du colis

Vérifiez que tous les composants sont présents dans le package :

Produit terminéview

The Aigostar Solar Outdoor Light consists of a solar panel and a lamp unit connected by a 3-meter cable.

Diagram showing the solar panel, connecting cable, and lamp unit with dimensions.

Figure 1 : Composants et dimensions du produit. This image illustrates the solar panel (175mm x 175mm), the 2.8-meter connecting cable, and the lamp unit (175mm diameter, 63mm height) with a 0.2-meter cable from the lamp to its mounting point.

Configuration et installation

The solar light offers two installation options: as a suspended light or a wall-mounted light. Choose the method that best suits your needs.

1. Emplacement des panneaux solaires

The solar panel must be installed in a location that receives maximum direct sunlight throughout the day to ensure efficient charging of the 5000 mAh lithium-ion battery. A full charge takes 4-6 hours and provides up to 12 hours of illumination.

2. Lamp Installation de l'unité

Le lamp unit can be installed as a pendant light or a wall sconce. Use the provided universal wheel to adjust the lighting angle as required. The 3-meter cable allows flexible placement of the lamp unit relative to the solar panel.

Image showing two installation methods: wall-mounted and suspended, with a brightness adjustment bar.

Figure 2: Two Installation Methods. The left side shows the lamp unit wall-mounted, while the right side shows it suspended from a pergola. A brightness adjustment bar is also visible, indicating adjustable light output.

Montage mural: Sécurisez le lamp unit to a wall using appropriate screws and anchors. Ensure the universal wheel is tightened after adjusting the angle.

Support suspendu : Accrochez le lamp unit from a suitable overhead structure. The cable length provides flexibility for placement.

Mode d'emploi

The Aigostar Solar Outdoor Light is controlled via the included remote control. The remote has a range of up to 6 meters.

Fonctions de la télécommande :

Remote control layout with buttons for On/Off, Sensing Modes, Color Temperature, Brightness, and Timer.

Figure 3 : Télécommandeview. This image displays the remote control with buttons for power, sensing modes (M1, M2, M3), color temperature (3000K, 4000K, 6500K), brightness levels (25%, 50%, 100%), and timer settings (3H, 5H, 8H, Time Off).

Fonctionnement du détecteur de mouvement :

The motion sensor has a 360° detection angle and a range of 8-10 meters. It activates the light based on the selected sensing mode.

Illustrations of three motion sensor modes: Dim Sensor Light Mode, Sensor Light Mode, and Smart Light Mode.

Figure 4: Motion Sensor Modes. This image visually explains the three sensing modes: Dim Sensor Light Mode (M1) where the light is dim and brightens upon motion, Sensor Light Mode (M2) where the light is off and turns on upon motion, and Smart Light Mode (M3) which provides automatic illumination after dark.

Entretien

Dépannage

ProblèmeCause possibleSolution
La lumière ne s'allume pas la nuit.Charge insuffisante des panneaux solaires.Veillez à placer le panneau solaire en plein soleil pendant 4 à 6 heures par jour. Nettoyez la surface du panneau solaire.
Le détecteur de mouvement ne fonctionne pas.Incorrect sensing mode selected or obstruction.Check remote control settings (M1, M2). Ensure no obstructions are blocking the sensor.
La télécommande ne répond pas.Batterie de la télécommande déchargée ou hors de portée.Replace the remote control battery. Ensure you are within the 6-meter operating range.
La luminosité est faible.Low battery charge or brightness setting.Allow the solar panel to charge fully. Adjust brightness to 50% or 100% using the remote.

Caractéristiques

FonctionnalitéDétail
MarqueAigostar
Numéro de modèleSSP-Microwave Sensor-G
PouvoirLED 50W
Flux lumineux500 XNUMX lumens
Température de couleurAdjustable: 3000K / 4000K / 6500K
Capacité de la batterie5000 mAh Lithium-ion
Temps de charge4 à 6 heures (lumière directe du soleil)
Durée d'éclairageJusqu'à 12 heures (avec une charge complète)
Angle du capteur de mouvement360°
Distance du capteur de mouvement8-10 mètres
Portée de la télécommande6 mètres
Cable Length (Solar Panel to Lamp)3 mètres
Indice d'étanchéitéIP65
MatérielPlastique
Dimensions du produit (L x l x H)18.5 x 19.5 x 11.5 cm
Poids de l'article620 grammes
Type d'installationWall mount, Suspended mount

Garantie et assistance

For warranty information and customer support, please refer to the purchase platform or contact Aigostar customer service directly. Details regarding spare parts availability and software updates are not provided in the product specifications.

Pour obtenir de l'aide supplémentaire, veuillez consulter le site officiel d'Aigostar. webou contactez votre revendeur.