IMEX GTA052

Manuel d'utilisation du robinet de douche thermostatique encastré IMEX GTA052 ASSEN

Model: GTA052 | Brand: IMEX

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your IMEX GTA052 ASSEN Thermostatic Built-in Shower Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

Consignes de sécurité

  • Installation professionnelle recommandée : Due to the built-in nature of this shower faucet, professional plumbing installation is strongly recommended to ensure correct and safe operation.
  • Approvisionnement en eau: Assurez-vous que l'alimentation en eau principale est coupée avant de commencer tout travail d'installation ou d'entretien.
  • Contrôle de la température : The thermostatic cartridge is designed to maintain a consistent water temperature. However, always test the water temperature before stepping into the shower to prevent scalding, especially for children or individuals with sensitive skin.
  • Nettoyage: Use only mild, non-abrasive cleaners on chrome surfaces to prevent damage.

Contenu du colis

Vérifiez que tous les composants sont présents avant de commencer l'installation :

  • Thermostatic built-in shower mixer (2-way brass body with registration box)
  • Round brass distributor
  • PVC hose (1.5 m)
  • Hand shower holder with water outlet
  • Thermostatic cartridge (TURN CLEAN SYSTEM)
  • Round escutcheons (Ø 80 mm) for hand shower holder, diverter, and thermostatic handle
  • Stainless steel round shower head (Ø25 cm, ultra-flat, anti-limescale)
  • Wall outlet tube in brass
  • Round hand shower

Configuration et installation

The IMEX GTA052 ASSEN shower faucet is designed for built-in installation. This requires careful planning and execution, typically involving recessing the main mixer body and associated plumbing within the wall. It is highly recommended that installation be performed by a qualified plumber to ensure compliance with local building codes and proper functionality.

  1. Préparez le mur : Create the necessary recess in the wall for the 2-way brass body with its registration box. Ensure adequate space for plumbing connections and future access if required.
  2. Install Mixer Body: Securely mount the built-in mixer body within the wall recess, ensuring it is level and at the correct depth relative to the finished wall surface. Connect the hot and cold water supply lines to the designated inlets.
  3. Prises de connexion : Connect the two outlets from the mixer body to the shower head and the hand shower outlet/holder respectively. The brass wall outlet tube should be installed for the main shower head.
  4. Installer le pommeau de douche : Attach the stainless steel round shower head (Ø25 cm) to the wall outlet tube. Ensure a watertight seal.
  5. Install Hand Shower Components: Mount the hand shower holder with water outlet at a convenient height. Connect the PVC hose (1.5 m) to the outlet and the round hand shower.
  6. Assemblage final : Once plumbing connections are complete and tested for leaks, install the round escutcheons (Ø 80 mm) and the thermostatic handle and diverter handle onto their respective shafts.
  7. Fonctionnalité de test : Turn on the main water supply and test all functions, checking for leaks, proper water flow, and temperature control.
Installed IMEX GTA052 ASSEN Thermostatic Built-in Shower Faucet with hand shower and controls

Figure 1 : Surview of the IMEX GTA052 ASSEN Thermostatic Built-in Shower Faucet installed, showing the main controls and hand shower.

Mode d'emploi

Your IMEX GTA052 ASSEN shower faucet features a thermostatic control for precise temperature management and a 2-way diverter to switch between the main shower head and the hand shower.

  1. Réglage de la température : Use the thermostatic handle (typically on one side) to set your desired water temperature. The thermostatic cartridge will automatically mix hot and cold water to maintain this temperature, even if water pressure fluctuates.
  2. Water Flow Control / Diverter: Use the other handle to turn the water on/off and to select the water outlet.
    • Rotate the handle to control the water flow rate.
    • Push or pull, or rotate the handle to switch between the main shower head and the hand shower. Refer to the markings on the escutcheon for specific positions.
  3. Débit moyen : The system provides an average flow rate of 20 liters per minute, ensuring a comfortable shower experience.
Close-up of the IMEX GTA052 ASSEN round shower head in operation, showing water streams

Figure 2 : The round shower head delivering a consistent water flow, demonstrating typical operation.

Entretien

Regular maintenance will help preserve the appearance and functionality of your IMEX GTA052 ASSEN shower faucet.

  • Nettoyage des surfaces chromées : Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Avoid using abrasive sponges, harsh chemicals, or acidic cleaners, as these can damage the finish. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
  • Thermostatic Cartridge (TURN CLEAN SYSTEM): The integrated TURN CLEAN SYSTEM thermostatic cartridge is self-cleaning, which helps prevent limescale buildup and ensures consistent temperature control. No special user maintenance is typically required for the cartridge itself, beyond regular use.
  • Anti-Limescale Shower Head: The stainless steel shower head features anti-limescale nozzles. Periodically rub the silicone nozzles to dislodge any mineral deposits. For more stubborn buildup, a mild descaling solution can be used, followed by thorough rinsing.
  • Hose and Hand Shower: Clean the PVC hose and hand shower with a soft cloth and mild soap. Check the hose periodically for any signs of wear or damage.

Dépannage

If you encounter issues with your shower faucet, refer to the following common troubleshooting steps:

ProblèmeCause possibleSolution
Faible débit d'eau
  • Partially closed stopcock.
  • Clogged shower head nozzles.
  • Debris in the thermostatic cartridge or filters.
  • Assurez-vous que tous les robinets d'arrêt sont complètement ouverts.
  • Clean the anti-limescale nozzles on the shower head.
  • If persistent, consult a plumber to inspect and clean the cartridge/filters.
Température de l'eau irrégulière
  • Fluctuations in hot/cold water supply pressure.
  • Thermostatic cartridge issue.
  • Ensure stable hot and cold water pressure.
  • The TURN CLEAN SYSTEM cartridge is designed to be self-cleaning; if issues persist, professional inspection may be needed.
Fuites de connexions
  • Connexions lâches.
  • Joints d'étanchéité ou joints toriques endommagés.
  • Turn off water supply and carefully check all connections. Tighten if loose.
  • If seals are damaged, they may need replacement by a qualified plumber.

For problems not listed here or if solutions do not resolve the issue, please contact a qualified plumber or IMEX customer support.

Caractéristiques

MarqueIMEX
Numéro de modèleGTA052
Type de produitThermostatic Built-in Shower Faucet
Couleur/FinitionChrome
Nombre de façons2 (Shower Head, Hand Shower)
Nombre de poignées1 (for temperature and flow/diverter)
Débit moyen20 L/min
MatérielBrass (mixer body, distributor, wall tube), Steel (shower head), PVC (hose)
Diamètre de la pomme de doucheØ25 cm (Round, ultra-flat, anti-limescale)
Longueur du tuyau1.5 m
Type de cartoucheThermostatic, TURN CLEAN SYSTEM (self-cleaning)
Poids de l'article1 kilogramme

Garantie et assistance

For warranty information, technical support, or to purchase replacement parts, please contact IMEX customer service or refer to the official IMEX webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

Documents connexes - GTA052

Préview Mitigeur de douche monocommande Suburb avec inverseur - Fiche technique
Spécifications techniques et schéma du mitigeur de douche manuel monocommande Suburb avec inverseur d'Imex. Comprend les dimensions, la référence et les informations de garantie.
Préview Fiche technique du mitigeur de douche monocommande Suburb Manual
Spécifications techniques et schéma du mitigeur de douche manuel monocommande Imex Suburb, référence : SUSHVO. Comprend les dimensions, les instructions d’installation et les informations relatives à la garantie.
Préview Manuel d'utilisation du récepteur de commande de machine IMEX MR360
Manuel d'instructions du récepteur de commande de machine IMEX MR360, détaillant le produit.view, méthodes de détection, application, maintenance et spécifications. Caractéristiques : réception laser à 360° et écran LED haute luminosité.
Préview Levier latéral unique Imex Alma Basin Fiche technique du mélangeur
Spécifications techniques et dimensions du levier latéral unique Imex Alma Basin Mixeur (réf. : ERBAS). Comprend les instructions d’installation et les informations relatives à la garantie.
Préview Guide d'installation du bain coulé Imex
Instructions détaillées pour l'installation d'une baignoire Imex Cast, couvrant le montage des pieds, le positionnement, la mise à niveau et l'étanchéité pour une installation sûre et étanche.
Préview Ensemble de douche Imex Ravine Cool Touch - Fiche technique
Caractéristiques techniques de l'ensemble de douche thermostatique Imex Ravine Cool Touch, Easy Fix, en chrome, comprenant une douche de tête fixe et une douchette multifonction réglable. Dimensions, garantie et conseils d'installation et d'entretien inclus.