Lexicon Dade Queen Platform Bed (Model 1492GY-1) Instruction Manual

1. Produit terminéview

The Lexicon Dade Queen Platform Bed is designed to offer a modern and versatile sleeping solution. This platform bed features a gray velvet fabric upholstered headboard with vertical channel-tufting, complemented by a brushed gray finish on the engineered wood frame, footboard, and rails. Its platform construction eliminates the need for a box spring.

Image 1.1: The Lexicon Dade Queen Platform Bed in a contemporary bedroom setting, showcasing its gray velvet headboard and wood frame.

2. Consignes de sécurité

Please read and understand all instructions before beginning assembly. Failure to follow these instructions may result in injury or damage to the product. Keep all small parts and packaging materials away from children. Assembly should be performed by at least two adults. Do not use power tools for assembly unless specifically instructed, as overtightening fasteners can cause damage. Ensure all connections are secure before use. Do not exceed the recommended weight capacity for the bed frame.

3. Contenu du colis

Avant de commencer l'assemblage, veuillez vérifier que tous les composants énumérés ci-dessous sont présents. Si des pièces sont manquantes ou endommagées, veuillez contacter le service client.

• Tête de lit (1)
• Marchepied (1)
• Rails latéraux (2)
• Support Slats (Multiple)
• Center Support Legs (Multiple)
• Hardware Pack (Bolts, Washers, Allen Wrench, etc.)

4. Instructions de montage

Suivez attentivement ces étapes pour un montage correct. Il est recommandé de monter le lit dans la pièce où il sera utilisé.

1. Déballer et identifier les pièces : Retirez soigneusement tous les composants de leur emballage. Disposez-les sur une surface douce et propre afin d'éviter les rayures. Identifiez chaque pièce à l'aide de la liste des pièces fournie.
2. Fixez les longerons à la tête de lit : Align the side rails with the pre-drilled holes on the headboard. Secure them using the appropriate bolts and washers from the hardware pack. Do not fully tighten bolts until all major components are connected.
3. Fixez les longerons au pied de lit : Connect the other end of the side rails to the footboard, aligning holes and securing with bolts and washers. Once all four corners are connected, gently tighten all bolts using the provided Allen wrench.


Image 4.1 : Côté view of the bed frame, illustrating the connection points between the side rails, headboard, and footboard.

4. Installer les pieds de support centraux : Attach the center support legs to the designated crossbeams or support points on the side rails. Ensure they are firmly attached and provide stable support.
5. Placer les lattes de support : Lay the wooden support slats across the bed frame, ensuring they are evenly spaced and secured to the side rails using the provided fasteners (if applicable). The slats provide the necessary support for your mattress.


Image 4.2 : Inclinée view of the bed frame with the wooden support slats properly installed, ready for a mattress.

6. Serrage final : Double-check all bolts and fasteners to ensure they are fully tightened. Do not overtighten.

5. Utilisation

This platform bed is designed to be used without a box spring. Simply place your queen-sized mattress directly onto the support slats. Ensure the mattress is centered and evenly distributed on the frame. Avoid jumping on the bed or placing excessive localized weight on any single point of the frame or slats.

6. Entretien

• Nettoyage des tissus d'ameublement en velours : For general cleaning, gently vacuum the velvet fabric using an upholstery attachment. For spills, blot immediately with a clean, dry cloth. For stubborn stains, consult a professional upholstery cleaner. Avoid harsh chemicals.
• Nettoyage du cadre en bois : Essuyez le cadre en bois avec un chiffon doux et sec.amp cloth. Avoid abrasive cleaners or polishes that may damage the finish. Dry immediately with a clean cloth.
• Vérification du matériel : Periodically check all bolts and fasteners to ensure they remain tight. Retighten as necessary to maintain stability and prevent squeaking.
• Évitez la lumière directe du soleil : Prolonged exposure to direct sunlight can cause fading of the velvet fabric and wood finish.

Image 6.1: Close-up detail of the gray velvet fabric and the brushed gray wood finish, illustrating the textures for cleaning reference.

7. Dépannage

• Grincements : If the bed squeaks, check all bolts and connections. Tighten any loose hardware. Ensure the center support legs are firmly on the floor and evenly supporting the frame.
• Cadre instable : If the bed feels wobbly, verify that all components are correctly assembled and all fasteners are securely tightened. Ensure the bed is on a level surface.
• Parties endommagées: Si une pièce quelconque est endommagée lors du montage ou de l'utilisation, cessez immédiatement l'utilisation et contactez le service client pour obtenir des pièces de rechange.

8. Spécifications

Image 8.1: Dimensional diagram of the Lexicon Dade Queen Platform Bed.

9. Garantie et assistance

For warranty information and customer support, please refer to the product description on the store page or contact Lexicon customer service directly. You can visit the official Lexicon store for more details: Lexicon Store.