Tackform Link Phone Mount with Top Dash Clip for 2021-2025 Ford Bronco

Produit terminéview

The Tackform Link Phone Mount (Model DC12-3120L) is specifically designed for the 6th Generation Ford Bronco (2021-2025 models), including the Raptor. This mount provides a secure and accessible location for your smartphone on the vehicle's dashboard. It features a precision-engineered design with CNC machined aluminum components for durability and a versatile mounting system.

Image: The Tackform Link Phone Mount securely holding a smartphone in a Ford Bronco, demonstrating its compatibility and placement on the dashboard.

Qu'y a-t-il dans la boîte

The Tackform Link Phone Mount package includes the following components:

• Base (DC12-20F)
• Arm (AR20-1031)
• Holder (CR-01L-20)

Image: A visual representation of all components included in the Tackform DC12-3120L kit.

Configuration et installation

Follow these steps to install your Tackform Link Phone Mount:

1. Prepare the Dash Clip: The dash clip comes with a ball installed on top and a dovetail on the front. Depending on your preferred configuration, you may need to adjust these. Most users prefer to move the dovetail to the top location for a shorter, more common setup.
2. Remove Components (if necessary): If you are moving the dovetail to the top, first remove the ball from the top using the provided wrench. Then, remove the dovetail from the front.
3. Reconfigure (if necessary): Install the dovetail onto the top location where the ball was previously. Insert the rubber cover into the now-empty front slot.
4. Loosen Bottom Legs: Use the provided wrench to loosen the screws on the bottom legs of the dash clip. Loosen them enough so the clip can easily slide over the dashboard edge.
5. Positionnez le clip : Slide the dash clip over the edge of your Ford Bronco's dashboard. Ensure the small lip on the back of the clip fits securely into the dashboard seam. Position the clip where you desire, typically closest to the driver.
6. Serrez les vis : Once positioned, tighten the screws on the bottom legs firmly to secure the clip to the dashboard.
7. Support de téléphone à fixer : Install the coupler and your preferred phone holder (e.g., Enduro 20 Lite Phone Cradle) onto the dovetail or ball.

Remarque importante : This dash clip is designed for Ford Bronco dashboards made of hard plastic. It is not recommended for use with dashboards featuring leather or leatherette finishes, as it may cause damage. If your vehicle has a leather dash, consider alternative mounting solutions like a dashboard mount or grab handle mount.

Image: Visual guide showing various configurations and the easy installation process of the mount on the dashboard.

Mode d'emploi

The Tackform Link Phone Mount is designed for ease of use and secure device holding.

• Compatibilité téléphonique universelle : The phone holder accommodates nearly all smartphone models, cases, and sizes. It securely holds devices up to 3.7 inches wide and 0.6 inches thick.
• Innovative Cradle Design: L'octagon-shaped cradle grips minimize heat transfer to your phone. The injection-molded, clip-in replaceable grips provide a secure hold without relying on adhesive tape. The spring mechanism allows for effortless phone insertion and removal.
• Amplitude de mouvement complète : The 2-inch long, fully articulating dual socket ball arm allows for precise adjustment and positioning of your device for optimal visibility and accessibility.
• Color Swap Compatible: The DuraLock arm is compatible with Tackform's DuraLock knobs, allowing for customization with various anodized billet aluminum knob colors (black knob included).

Image : détaillée view of the Enduro Series 20lite phone cradle, illustrating its design for secure phone holding and ease of use.

Image: Breakdown of the mount's components, highlighting the commercial-grade materials such as CNC machined aluminum and stainless steel pins.

Image: Close-up of the 20 Series compatible ball and socket system, demonstrating its robust design.

Entretien

To ensure the longevity and optimal performance of your Tackform Link Phone Mount, follow these simple maintenance guidelines:

• Nettoyage régulier : Wipe down the mount and cradle grips with a soft, damp Utilisez un chiffon pour enlever la poussière et les débris. Évitez les produits chimiques agressifs qui pourraient endommager la finition.
• Vérifier l'étanchéité : Periodically check the tightness of the screws securing the dash clip to ensure it remains firmly in place.
• Inspecter les composants : Occasionally inspect the ball and socket joints and cradle grips for any signs of wear or damage. Replace components if necessary.

Dépannage

If you encounter any issues with your Tackform Link Phone Mount, consider the following:

• Le support semble lâche : Ensure all screws, especially those on the dash clip and the coupler, are tightened securely.
• Téléphone non tenu correctement : Verify that your phone's dimensions (width and thickness) are within the specified limits (up to 3.7" wide and 0.6" thick). Ensure the cradle grips are clean and free of obstructions.
• Interference with dashboard features: Adjust the position of the dash clip along the dashboard edge or utilize the full range of motion of the articulating arm to optimize placement and avoid blocking screens or controls.
• Dashboard damage: As noted in the installation section, this mount is designed for hard plastic dashboards. Using it on leather or leatherette dashboards may cause indentations or damage. Ensure your dashboard material is compatible.

Caractéristiques

Garantie et assistance

For product support, please contact Tackform directly. This product is eligible for a 30-day return/replacement policy. Additionally, extended protection plans are available for purchase separately to cover your product for 2 or 3 years.

Pour plus d'informations, visitez le Tackform Store on Amazon.