Introduction
This manual provides essential information for the proper installation, operation, and maintenance of your Tork Elevation S1 Liquid Skincare Dispenser. The dispenser is designed for liquid soap and hand sanitizer, featuring a sleek, modern design and a closed, sealed system to promote hand hygiene and reduce contamination risk. It is engineered for effortless cleaning and intuitive maintenance, allowing for quick refilling.
Image: A pack of six Tork Elevation S1 Liquid Skincare Dispensers, black in color, showcasing their uniform design.
Installation
The Tork Elevation S1 Liquid Skincare Dispenser offers two primary methods for installation:
- Fixer avec des vis : For a permanent and robust installation, use appropriate screws to fasten the dispenser to the wall. Ensure the mounting surface is suitable for drilling.
- Secure with Adhesive Strips: For a less permanent solution or on surfaces where drilling is not preferred, strong adhesive strips can be used. Ensure the surface is clean and dry before applying.
Image: Illustration detailing two installation methods for the dispenser: using screws for a secure fit and adhesive strips for easier mounting.
After mounting, ensure the dispenser is securely attached and level before proceeding to refill.
Mode d'emploi
Dispensing Soap/Sanitizer
To dispense liquid soap or hand sanitizer, simply place your hand under the dispenser's nozzle and press the dispensing lever. The dispenser is designed for controlled dispensing to minimize waste.
Image: A user activating the Tork dispenser to receive soap, demonstrating its ease of use in a restroom setting.
Remplissage du distributeur
The Tork S1 system is designed for quick and easy refilling, typically in less than 10 seconds. Use only Tork S1 liquid soap and sanitizer skincare products in sealed bottles to ensure proper function and hygiene.
- Ouvrez le couvercle du distributeur.
- Remove the empty S1 refill bottle.
- Insert a new, sealed Tork S1 refill bottle. The system ensures a new pump with every bottle, maintaining hygiene.
- Fermez bien le couvercle du distributeur.
Image: A close-up of the dispenser being refilled, illustrating the simple process of replacing a soap cartridge.
The closed system protects the soap purity all the way to the user's hands, preventing contamination.
Video: An official Tork video demonstrating the features and ease of use of the S1 Liquid Skincare Dispenser, including the quick refill process and hygienic sealed system.
Entretien
The Tork Elevation S1 dispenser is designed for effortless cleaning. Regular cleaning helps maintain its sleek appearance and ensures optimal hygiene.
- Essuyez l'extérieur du distributeur avec un chiffon doux et sec.amp un chiffon et une solution nettoyante douce.
- Avoid abrasive cleaners or harsh chemicals, as these can damage the dispenser's finish.
- Ensure no liquid enters the internal mechanisms during cleaning.
The closed system and sealed refills inherently reduce the need for internal cleaning of the soap reservoir, as each refill comes with a new pump.
Dépannage
This section addresses common issues you might encounter with your Tork Elevation S1 Liquid Skincare Dispenser.
| Problème | Cause possible | Solution |
|---|---|---|
| No soap/sanitizer dispenses. | Refill bottle is empty or incorrectly inserted. | Check the refill level. Replace the refill bottle if empty, ensuring it is correctly seated. |
| Le distributeur semble mal fixé au mur. | Mounting screws or adhesive strips are not secure. | Re-tighten screws or re-apply adhesive strips according to installation instructions. |
| Soap/sanitizer leaks from the dispenser. | Refill bottle not properly sealed or damaged. | Ensure the refill bottle is correctly inserted and sealed. If the bottle is damaged, replace it. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Tork customer support.
Caractéristiques
- Numéro de modèle : 570028A
- Couleur: Noir
- Matériel: Plastique
- Dimensions du produit : 4.5 x 4.4 x 11.5 pouces (P x L x H)
- Poids de l'article : 5.1 livres (pour un paquet de 6)
- Nombre d'unités : 6.0 Count (dispensers)
- Capacité de volume de liquide : Compatible with Tork S1 system 1000ml refills.
- Fabricant: Essity
- Code GTIN: 10073286621389
- Piles requises : Non
- Composants inclus : Dispenser (refills not included)
Image: The product packaging, displaying key information such as the model number and system compatibility.
Garantie et assistance
Tork offers a 5-year extended warranty for this product. Registration is required for eligibility.
Image: Warranty information graphic, highlighting the 5-year extended warranty and the requirement for registration.
For warranty registration and further support, please visit the official Tork website:
Dispensers are owned by Essity and leased for the purpose of dispensing Tork® brand refills. Use of any other refills in the dispensers is not allowed.
