Consignes de sécurité importantes
Please read all instructions carefully before assembly and use of this product. Keep this manual for future reference.
- Capacité de poids maximale : Upper bed: 250 lbs, Bottom bed: 300 lbs, Trundle bed: 175 lbs. Do not exceed these limits.
- Âge recommandé : For safety, the upper bunk is not recommended for children under 6 years of age.
- Épaisseur du matelas : Use mattresses no thicker than 6 inches for the upper bed and trundle, and no thicker than 8 inches for the bottom bed.
- Garde-corps : Always use guardrails on the upper bunk. Ensure they are properly installed and secured.
- Sécurité des échelles : Always use the ladder for entering and exiting the upper bunk. Do not use the bed as a play structure.
- Assemblée: Two adults are recommended for assembly. Ensure all hardware is securely tightened before use. Periodically check and re-tighten hardware.
- Ventilation: Assurez une ventilation adéquate autour du lit.
- Detachable Feature: When converting the bunk bed into two separate beds, ensure all components are correctly reassembled and stable.
Contenu du colis
Avant de commencer l'assemblage, veuillez vérifier que tous les composants sont présents. Si des pièces sont manquantes ou endommagées, veuillez contacter le service client.
- Full Over Full Bunk Bed Frame components
- Trundle Bed Frame components
- Échelle
- Garde-corps
- Slat kits for all three beds
- Hardware pack (screws, bolts, nuts, etc.)
- Outils de montage (clé Allen, etc.)
Instructions d'installation et d'assemblage
Suivez attentivement ces étapes pour un montage correct. Il est recommandé de monter le lit dans la pièce où il sera utilisé.
1. Déballer et identifier les pièces
Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Refer to the parts list in your package to identify each piece.
2. Réview Dimensions
Before assembly, familiarize yourself with the overall dimensions of the bunk bed and its components.
3. Assemble the Lower Bed Frame
Begin by assembling the headboard and footboard for the lower bed. Attach the side rails to connect them, ensuring all bolts are finger-tight. Insert the wooden slats into the designated slots or attach them using the provided hardware. Fully tighten all hardware once the frame is stable.
4. Assemble the Upper Bed Frame
Repeat the process for the upper bed frame, assembling its headboard, footboard, and side rails. Secure the slats. Do not attach the upper bed to the lower bed yet.
5. Assemble the Trundle Bed
Assemble the trundle bed frame, including its side panels and slat support. Attach the wheels to the bottom of the trundle frame for easy movement.
6. Stack the Bunk Beds and Attach Ladder/Guardrails
Carefully lift the assembled upper bed frame and place it onto the lower bed frame, aligning the connecting posts. Secure the upper bed to the lower bed using the provided long bolts and nuts. Attach the ladder to the designated hooks or mounting points on the side of the bunk bed. Install the guardrails on all open sides of the upper bunk, ensuring they are firmly secured.
7. Inspection finale
Once assembly is complete, double-check all connections and hardware to ensure they are tight and secure. Place the recommended mattresses on each bed.
Mode d'emploi
Using the Bunk Bed Configuration
The SOFTSEA Full Over Full Bunk Bed provides two full-size sleeping surfaces. The upper bunk is accessed via the integrated ladder. Ensure the ladder is always securely attached before use. The trundle bed can be pulled out from underneath the lower bunk for an additional sleeping space.
Converting to Two Separate Beds
This bunk bed is designed to be detachable, allowing it to be converted into two independent full-size platform beds. To convert:
- Retirez les matelas des deux couchettes.
- Carefully loosen and remove the bolts connecting the upper bunk to the lower bunk.
- With assistance, carefully lift and remove the upper bunk frame.
- Place the upper bunk frame in its desired location. Ensure it is stable and level.
- The lower bunk remains as a standalone full-size bed.
- The trundle bed can still be used with either of the separated beds or independently.
Entretien
Un entretien régulier garantira la longévité et la sécurité de votre lit superposé.
- Nettoyage: Essuyez les surfaces avec un chiffon doux, damp Chiffon. Évitez les produits chimiques agressifs ou les nettoyants abrasifs qui pourraient endommager la finition.
- Vérification du matériel : Inspectez périodiquement (tous les 3 à 6 mois) tous les boulons, vis et fixations. Resserrer les éléments de fixation desserrés afin de préserver l'intégrité structurelle.
- Inspection des lattes : Check the wooden slats for any signs of damage or cracking. Replace any damaged slats immediately to ensure proper mattress support.
- Roues de tiroir : Ensure trundle wheels are clean and roll smoothly. Remove any debris that may hinder movement.
- Évitez la surcharge : Do not exceed the specified weight capacities for each bed.
Dépannage
If you encounter issues with your bunk bed, refer to the following common problems and solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Le lit semble bancal ou instable. | Connexions matérielles desserrées. | Vérifiez et resserrez tous les boulons et vis. Assurez-vous que le lit est installé sur une surface plane. |
| Bruits de grincement | Loose hardware or friction between wood components. | Re-tighten all hardware. Apply a small amount of wax or silicone spray to contact points if necessary. |
| Le lit gigogne est difficile à sortir/à rentrer. | Obstruction under the bed, dirty wheels, or uneven floor. | Clear any obstructions. Clean trundle wheels. Ensure the floor surface is level. Check mattress thickness. |
| Pièces manquantes lors de l'assemblage | Erreur d'emballage. | Contact customer support with your model number and a description of the missing parts. |
Caractéristiques
- Type de produit: Lit superposé complet sur complet avec lit gigogne
- Numéro de modèle : 27389
- Dimensions globales du produit : 79.5" L x 57" l x 59.9" H
- Matériel: Contreplaqué, MDF, pin
- Couleur: Gris
- Capacité de poids :
- Upper Bed: 250 lbs
- Bottom Bed: 300 lbs
- Lit gigogne : 175 kg
- Épaisseur de matelas recommandée :
- Upper Bed: 6 inches
- Bottom Bed: 8 inches
- Trundle Bed: 6 inches
- Nombre de lattes :
- Upper Bed: 14
- Bottom Bed: 14
- Trundle Bed: 7
- Assemblage requis : Oui
- Pays d'origine : Vietnam
Informations sur la garantie
SOFTSEA products are manufactured with quality and care. For specific warranty details regarding your Full Over Full Bunk Bed with Trundle (Model 27389), please refer to the warranty card included in your product packaging or visit the official SOFTSEA webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat pour toute réclamation au titre de la garantie.
Assistance clientèle
If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact SOFTSEA customer support.
- Support en ligne: Visitez le SOFTSEA Store on Amazon Pour consulter la FAQ et les options de contact.
- E-mail: Refer to your product packaging for direct email support.
- Téléphone: Refer to your product packaging for direct phone support.
Veuillez avoir votre numéro de modèle (27389) et vos informations d'achat à portée de main lorsque vous contactez le support.
