Fanttik X9 Ace Mini Bike Pump Instruction Manual

Introduction

The Fanttik X9 Ace Mini Bike Pump is a compact and powerful electric air pump designed for convenient and efficient tire inflation. Featuring a maximum pressure of 150 PSI and an all-in-one hose with Presta and Schrader valve compatibility, it is suitable for various bicycles including mountain bikes, road bikes, and electric bikes. This manual provides essential information for the safe and effective use of your X9 Ace.

Qu'y a-t-il dans la boîte

• Fanttik X9 Ace Mini Bike Pump (with integrated all-in-one hose, Presta and Schrader valves)
• Câble de chargement USB-C
• Manuel d'instructions

Produit terminéview

The Fanttik X9 Ace features a sleek, palm-sized design with a durable plastic casing. It incorporates a digital display for pressure readings and intuitive controls for operation.

Image: The Fanttik X9 Ace Mini Bike Pump is designed to be compact and easily held in the palm of your hand, enhancing portability.

Caractéristiques principales :

• Affichage numérique: Provides real-time pressure readings.
• Boutons de contrôle : Intuitive interface for power, mode selection, and pressure adjustment.
• All-in-One Hose: Integrated hose with convertible Presta and Schrader valves for seamless switching.
• Port de chargement USB-C : Recharge pratique.
• Circuit de refroidissement: Allows for extended continuous operation.

Installation

1. Charge initiale :

Before first use, fully charge the Fanttik X9 Ace using the provided USB-C charging cable. The power indicator will show charging status.

Image: The power indicator lights on the Fanttik X9 Ace show the remaining battery level: White (>50%), Orange (20-50%), Red (<20%).

2. Attaching the Hose and Adapters:

The X9 Ace features an all-in-one hose that combines Presta and Schrader valves. Simply pull out the hose from its storage slot to power on the device. Rotate the valve head to switch between Presta and Schrader compatibility.

Image: The unique convertible valve allows for easy switching between Schrader and Presta valve types by rotating the head.

Image: The 360-degree rotatable hose allows for flexible connection to tire valves from any angle.

Mode d'emploi

1. Marche/Arrêt :

• Mise sous tension : Pull the hose out from its storage slot. The digital display will light up.
• Éteindre: Push the hose back into its storage slot. The device will automatically power off. You can also long-press the power button to manually turn it off.

2. Select Inflation Mode:

Use the mode button to cycle through preset inflation modes (e.g., bicycle, scooter, car, ball). Each mode has a default pressure setting, which can be adjusted.

3. Réglez la pression souhaitée :

Use the '+' and '-' buttons to adjust the target pressure (PSI or BAR) for your tire. The device supports up to 150 PSI.

4. Connect to Tire Valve:

Screw the appropriate valve head (Presta or Schrader) onto your tire valve stem. Ensure a secure connection to prevent air leakage.

5. Start Inflation:

Press the power button to begin inflation. The digital display will show the real-time pressure increase.

Image: Step-by-step guide for easy use: 1. Choose adapter, 2. Remove valve cap and connect, 3. Select desired pressure, 4. Press to start inflation.

6. Auto Shut-off:

The X9 Ace will automatically stop inflating once the preset target pressure is reached, preventing over-inflation.

Image: The auto shut-off feature ensures precise inflation, stopping automatically once the target PSI is achieved.

Intégration des médias

Vidéos officielles du produit :

Performance de travail

The following table illustrates the typical inflation times and number of inflations possible on a single full charge for various tire types.

Note: Experimental data, for reference only. Actual performance may vary based on usage conditions.

Entretien

• Nettoyage: Essuyez l'appareil avec un chiffon doux et sec. N'utilisez pas de produits chimiques agressifs ni de matériaux abrasifs.
• Stockage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures. Ensure the hose is properly stored in its slot.
• Chargement : Rechargez régulièrement la batterie, même si vous ne l'utilisez pas fréquemment, afin de préserver sa durée de vie.

Dépannage

• L'appareil ne s'allume pas : Ensure the hose is fully pulled out from its slot. Check battery level and recharge if necessary.
• No inflation/Air leakage: Verify that the valve head is securely screwed onto the tire valve. Ensure the correct valve type is selected.
• Lecture de pression inexacte : Ensure the connection to the tire valve is tight. If issues persist, compare with a known accurate gauge.
• Surchauffe: The device has a cooling system for continuous operation. If it feels excessively hot, allow it to cool down before further use.

Caractéristiques

• Nom du modèle : X9 Ace
• Marque: Fanttik
• Matériel: Plastique
• Poids de l'article : 384 gramme
• Source d'alimentation : Battery Powered (Lithium-ion Polymer (LiPo))
• Capacité de débit d'air : 10 litres par minute
• Pression maximale : 150 livre par pouce carré
• Mode de fonctionnement : Automatique
• Dimensions de l'article (L x l x H) : 3.87 x 1.56 x 3.14 pouces

Garantie et assistance

The Fanttik X9 Ace Mini Bike Pump comes with a 1-Year Warranty. For support or warranty claims, please refer to the contact information provided in your product packaging or visit the official Fanttik website.