Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire

1. Produit terminéview

The Philips DayBrite CFI Linear SDS Selectable Strip is a versatile 2-foot LED luminaire designed for various indoor lighting applications. This fixture offers field-selectable color temperatures (3500K, 4000K, 5000K) and lumen outputs (1200, 1800, 2400 lumens), providing flexibility to meet specific lighting requirements. It features 0-10V dimming capability for precise light level control.

Figure 1: Philips DayBrite CFI Linear SDS Selectable LED Strip Luminaire. This image shows the full length of the white linear LED strip light, featuring a frosted diffuser for even light distribution and a sleek, minimalist design suitable for various indoor installations.

2. Consignes de sécurité

Veuillez lire attentivement toutes les instructions avant l'installation et l'utilisation. Le non-respect de ces instructions peut entraîner un choc électrique, un incendie ou d'autres dangers. Conservez ce manuel pour toute consultation ultérieure.

• AVERTISSEMENT: Risque de choc électrique. Coupez l'alimentation au niveau du fusible ou du disjoncteur avant toute installation ou intervention.
• L'installation doit être effectuée par un électricien qualifié, conformément à tous les codes électriques nationaux et locaux applicables.
• Do not install in wet locations or near flammable materials.
• Assurer le vol d'alimentationtage is compatible with the luminaire's requirements (120-277V AC).
• Ne modifiez en aucun cas le luminaire.
• Handle with care to avoid damage to LED components.

3. Contenu du colis

Vérifiez que tous les composants sont présents et non endommagés à l'ouverture de l'emballage :

• 1 x Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire
• 1 x Guide d'installation (ce document)
• Mounting Hardware (e.g., screws, anchors - peut varier selon l'emballage)

4. Configuration et installation

This luminaire is designed for surface mounting. Professional installation is recommended.

1. Préparez la zone d'installation : Ensure the mounting surface is structurally sound and can support the weight of the fixture. Turn off power at the circuit breaker before beginning installation.
2. Marquer les points de montage : Use the luminaire as a template to mark the desired mounting locations on the ceiling or wall. Ensure marks are level and spaced correctly for secure attachment.
3. Installer le matériel de montage : Drill pilot holes at the marked locations. Insert appropriate anchors if mounting into drywall or plaster. Secure the mounting brackets (if separate) or the luminaire directly using screws.
4. Connexions de câblage :
   • Connect the AC power supply wires (Line, Neutral, Ground) from the junction box to the corresponding wires on the luminaire. Follow local electrical codes for proper wiring.
   • For 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the luminaire to the corresponding wires on your 0-10V dimming control system. Ensure polarity is correct.
   • Fixez tous les fils à l'aide de connecteurs ou de serre-fils appropriés.
5. Fixez le luminaire : Once wiring is complete and connections are secure, attach the luminaire firmly to the mounting surface. Ensure no wires are pinched.
6. Restaurer l'alimentation : Turn on power at the circuit breaker. Test the luminaire for proper operation and dimming functionality.

5. Mode d'emploi

This luminaire features field-selectable color temperature and lumen output settings.

• Sélection de la température de couleur : Locate the CCT (Correlated Color Temperature) selector switch on the luminaire. This switch allows you to choose between 3500K (Warm White), 4000K (Cool White), and 5000K (Daylight) settings. Ensure power is off before adjusting this switch.
• Lumen Output Selection: Locate the Lumen selector switch on the luminaire. This switch allows you to choose between 1200, 1800, and 2400 lumens. Ensure power is off before adjusting this switch.
• Gradation 0-10V : Once installed and wired to a compatible 0-10V dimmer, the light output can be adjusted smoothly from 100% down to 10% (or lower, depending on dimmer specifications) using the external dimming control.

6. Entretien

The Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire requires minimal maintenance.

• Nettoyage: Débranchez l'alimentation avant le nettoyage. Utilisez un chiffon doux, sec ou légèrement rêche.amp cloth to wipe the exterior surface of the luminaire. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or optical components.
• LED: The LEDs are integrated and do not require replacement.

7. Dépannage

If you experience issues with your luminaire, refer to the following common problems and solutions:

Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client.

8. Spécifications

9. Informations sur la garantie

This Philips DayBrite product is covered by a manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Signify webConsultez le site pour connaître les conditions générales de garantie détaillées. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.

10. Assistance clientèle

For technical assistance, product inquiries, or warranty claims, please contact Signify customer support:

• Website: Visit the official Signify or Philips Lighting webSite regroupant les ressources d'assistance, la FAQ et les informations de contact.
• Téléphone: Veuillez vous référer aux coordonnées fournies sur l'emballage du produit ou sur le site du fabricant. website.

When contacting support, please have your product model number (SDS21224L8CST-UNV-DIM) and proof of purchase readily available.