ANJ CS040

ANJ Mid Century Modern Accent Chair

Model: CS040 - Instruction Manual

1. Introduction

Thank you for choosing the ANJ Mid Century Modern Accent Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read all instructions carefully before assembly and retain this manual for future reference.

ANJ Mid Century Modern Accent Chair in green with a throw pillow

Figure 1: ANJ Mid Century Modern Accent Chair (Green)

2. Consignes de sécurité

To ensure safe use of your ANJ Accent Chair, please observe the following:

  • Ne pas dépasser la capacité de poids maximale de 300 livres.
  • Avant utilisation, assurez-vous que tous les boulons et vis sont bien serrés. Vérifiez-les périodiquement et resserrez-les si nécessaire.
  • Gardez les petites pièces et les matériaux d’emballage hors de portée des enfants pour éviter tout risque d’étouffement.
  • Évitez de monter sur la chaise ou de l'utiliser comme marchepied.
  • Placez la chaise sur une surface plane pour éviter qu'elle ne bascule.

3. Contenu du colis

Avant de commencer l'assemblage, vérifiez que toutes les pièces et la visserie sont présentes. Si des pièces sont manquantes ou endommagées, veuillez contacter le service client.

  • Dossier de chaise
  • Coussin de siège
  • Accoudoirs (gauche et droite)
  • Legs/Frame Components
  • Throw Pillow (1)
  • Quincaillerie de montage (vis, boulons, clé Allen)
  • Manuel de l'utilisateur (ce document)

4. Configuration et assemblage

Assembly is required. Follow these steps carefully. It is recommended to assemble the chair on a soft, clean surface to prevent scratches.

  1. Déballer les composants : Retirez soigneusement toutes les pièces de l'emballage et disposez-les. Vérifiez que le contenu de l'emballage correspond bien à la liste indiquée.
  2. Attach Armrests to Seat Frame: Align the pre-drilled holes on the armrests with the corresponding holes on the seat frame. Insert the provided bolts and tighten them using the Allen wrench. Do not overtighten initially.
  3. Fixez le dossier : Slide the backrest into the designated slots on the frame. Ensure it is fully seated. Secure with bolts as instructed in the included hardware guide.
  4. Insérer le coussin de siège : Place the seat cushion firmly onto the seat frame.
  5. Serrage final : Once all components are in place, go back and securely tighten all bolts and screws.
Diagram showing the dimensions of the ANJ Mid Century Modern Accent Chair

Figure 2 : Dimensions de la chaise pour référence d'assemblage

Arrière view of the ANJ Mid Century Modern Accent Chair, showing the wooden frame and backrest

Figure 3 : Arrière view of the assembled chair, highlighting frame connections.

5. Mode d'emploi

The ANJ Mid Century Modern Accent Chair is designed for comfortable seating in various indoor environments. It is ideal for:

  • En lisant: The high back and ergonomic design provide excellent support for extended reading sessions.
  • Relaxant: The plush, high-density sponge cushions offer a comfortable spot to unwind.
  • Accent Seating: Its mid-century modern aesthetic enhances the decor of living rooms, bedrooms, offices, or balconies.
Image showing the ANJ Accent Chair in various room settings: living room, bedroom, meeting room, study room

Figure 4: Versatile use of the accent chair in different settings.

6. Entretien

Proper care will extend the life and appearance of your ANJ Accent Chair:

  • Nettoyage: Nettoyer avec une publicitéamp En cas de tache, épongez immédiatement avec un chiffon propre et sec. Évitez les produits chimiques agressifs.
  • Entretien des coussins : The cushions are made of high-density sponge with a linen cover. Regularly fluff cushions to maintain their shape.
  • Entretien du cadre : The solid wood frame can be wiped with a soft, dry cloth. Avoid excessive moisture.
  • Coussinets pour les pieds : The chair includes anti-slip foot pads to protect your floor. Ensure they are intact and clean.
Close-up image highlighting the breathable linen fabric and 7-inch thick cushion of the ANJ Accent Chair

Figure 5: Detail of breathable linen fabric and cushion thickness.

Close-up of the chair's leg with an additional foot pad to prevent slipping and scratching

Figure 6: Anti-slip foot pads for floor protection.

7. Dépannage

Si vous rencontrez des problèmes avec votre chaise, consultez les problèmes courants et leurs solutions ci-dessous :

  • Vacillement: Check that all bolts and screws are securely tightened. Ensure the chair is on a flat, even surface.
  • Grincement: Re-tighten all connections. A small amount of silicone lubricant can be applied to joints if squeaking persists.
  • Compression du coussin : This is normal over time. Fluff cushions regularly.
  • Parties manquantes: If any parts were missing upon delivery, please contact ANJ customer support immediately.

8. Spécifications

FonctionnalitéDétail
MarqueANJ
Nom du modèleCS040
CouleurHigh Back-green
Dimensions hors tout26 po L x 32 po P x 29 po H
Taille du siège23 po L x 22 po P
Poids de l'article35.3 livres
Poids maximum recommandé300 livres
MatérielSolid Wood Frame, Linen Fabric, High-Density Sponge Fill
Dossier spécialErgonomic, High Back, Anti-skip Foot Pads
Composants inclusInstallation Hardware, User Manual, 1 Throw Pillow

9. Garantie et assistance

For any questions, concerns, or assistance with your ANJ Mid Century Modern Accent Chair, please contact ANJ customer support. While specific warranty details are not provided in this manual, please refer to your purchase documentation or the retailer's website for warranty information. Keep your proof of purchase for any warranty claims.

Coordonnées: Please refer to the contact details provided by your retailer or on the official ANJ website.

Documents connexes - CS040

Préview Catalogue de produits ANENJI : onduleurs solaires, régulateurs de charge et batteries
Explorez la gamme ANENJI d'onduleurs solaires haute performance, de régulateurs de charge solaire MPPT et de batteries LiFePO4. Découvrez leurs spécifications détaillées, leurs caractéristiques et leurs applications pour une utilisation résidentielle et automobile.
Préview Manuel d'utilisation de l'onduleur/chargeur solaire hybride ANENJI
Ce manuel d'utilisation fournit des instructions complètes pour l'onduleur/chargeur solaire hybride ANENJI 4.2 kVA et 5.0 kVA, couvrant l'installation, le fonctionnement, les spécifications et le dépannage pour une gestion efficace de l'énergie solaire.
Préview Manuel d'utilisation de la batterie murale LiFePO4 série ANENJI 5/10 kWh
Manuel d'utilisation de la batterie murale LiFePO4 série ANENJI 5/10KWH, couvrant la présentation du produit, ses caractéristiques, ses spécifications, son installation, son fonctionnement en parallèle et la connexion logicielle.
Préview Manuel d'utilisation de l'onduleur/chargeur solaire hybride ANENJI 6.2 kVA
Comprehensive user manual for the ANENJI 6.2KVA 230Vac Hybrid Solar Inverter/Charger, covering installation, operation, safety instructions, specifications, troubleshooting, and battery management (including lithium battery support). Includes detailed setup procedures and technical data.
Préview Guide de communication et de port de batterie de l'onduleur ANENJI
Détails techniques sur les interfaces de communication de batterie de l'onduleur ANENJI, les ports RS-232, RS-485 et WIFI, ainsi que les modèles BMS compatibles comme PACE et PYLON.
Préview ALIYIQI 艾力仪器 产品选型手册 - 测量与测试仪器
ALIYIQI (ALIYIQI)提供全面的力学测试仪器产品目录,包括扭矩扳手、推拉力计、硬度计、弹簧试验机等。了解艾力仪器的专业制造能力和高品质产品。