1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your KOLINK Regulator Series 850W Power Supply Unit (PSU). Please read this manual thoroughly before installation and retain it for future reference. This PSU is designed to provide stable and reliable power to your computer system, adhering to ATX 3.0 and PCIe 5.0 standards.
Consignes de sécurité
- Débranchez toujours le cordon d'alimentation de la prise murale avant d'installer, de retirer ou de nettoyer le bloc d'alimentation.
- N'ouvrez pas le bloc d'alimentation casing. Vol. élevétagDes électrodes sont présentes à l'intérieur, ce qui peut provoquer un choc électrique.
- Assurez-vous que le bloc d'alimentation est installé dans un endroit bien ventilé.
- Use only the modular cables provided with this PSU. Using incompatible cables may damage your system.
- Ce produit est conçu pour une utilisation en intérieur uniquement.
2. Contenu du colis
Vérifiez que tous les éléments énumérés ci-dessous sont présents dans l'emballage de votre produit :
- KOLINK Regulator Series 850W Power Supply Unit
- Modular Cable Set (including 24-pin ATX, 4+4 pin CPU, 6+2 pin PCIe, 12VHPWR, SATA, and Peripheral cables)
- Cordon d'alimentation secteur
- Vis de montage
- Manuel de l'utilisateur (ce document)
Image: A collection of all modular cables supplied with the Kolink Regulator PSU, including 24-pin ATX, CPU, PCIe, 12VHPWR, and SATA power cables.
3. Principales caractéristiques
The KOLINK Regulator Series 850W PSU incorporates advanced features for optimal performance and reliability:
- Compatible ATX 3.0 et PCIe 5.0 : Designed to meet the latest ATX 3.0 standard with native PCIe 5.0 support, including a 12VHPWR 600W cable for modern graphics cards.
- Certifié 80 PLUS Or : Achieves up to 90% efficiency at half load, reducing energy consumption and heat generation.
- Conception entièrement modulaire : Allows for custom cable management by connecting only the necessary cables, improving airflow and aesthetics.
- Condensateurs 100 % japonais : Utilizes high-quality Japanese capacitors for enhanced durability, stability, and long-term reliability.
- Switchable Semi-Fanless Mode: Features a 120mm Fluid Dynamic Bearing (FDB) fan that can operate in a semi-fanless mode, reducing fan speeds or stopping the fan entirely at lower loads for quieter operation.
- Multi-Protection Circuitry: Integrated safeguards protect your components from over-voltage, sous-voltage, over-power, short-circuit, and over-temperature conditions.
- Facteur de forme compact : Designed to fit a wide range of PC cases with its optimized dimensions.
Image: A close-up of the fully modular cable connection ports on the Kolink Regulator PSU, labeled for Motherboard, SATA, CPU/PCIe, and 12VHPWR.
Image : Une image détaillée view of the 120mm Fluid Dynamic Bearing fan within the Kolink Regulator PSU, highlighting its switchable semi-fanless operation for quieter performance at low loads.
Image: An internal perspective of the Kolink Regulator PSU, emphasizing the high-quality 100% Japanese capacitors used for enhanced reliability and performance.
Image: The Kolink Regulator PSU, illustrating its robust multi-protection circuitry designed to safeguard connected components.
4. Configuration et installation
Liste de contrôle avant l'installation
- Ensure your computer case is compatible with ATX PSUs.
- Verify that your motherboard and other components require 850W or less power.
- Gather necessary tools: screwdriver, zip ties (for cable management).
Étapes d'installation
- Préparez votre système : Disconnect the computer from the power outlet. Open your computer case to access the PSU mounting area. If replacing an old PSU, remove it first.
- Monter le bloc d'alimentation : Carefully slide the KOLINK Regulator PSU into the designated PSU bay in your computer case. Ensure the fan is oriented correctly (typically facing downwards or inwards, depending on case design). Secure the PSU with the provided mounting screws from the rear of the case.
- Raccordez les câbles modulaires : Identify the necessary cables for your components. Connect the modular cables to the corresponding ports on the PSU first, then route them to your components. Refer to the labels on the PSU for correct port identification.
- Alimentation de la carte mère : Connectez le câble ATX 24 broches à votre carte mère.
- Puissance du processeur : Connect the 4+4 pin CPU cable(s) to your motherboard's CPU power connector(s).
- Alimentation PCIe : For graphics cards, use the 6+2 pin PCIe cables. For modern GPUs requiring 12VHPWR, use the dedicated 12VHPWR 600W cable. Ensure all connectors are fully seated.
- Alimentation SATA : Connectez les câbles d'alimentation SATA à vos SSD, HDD et lecteurs optiques.
- Alimentation périphérique : Use peripheral (Molex) cables for any other components requiring them.
- Gestion des câbles: Route cables neatly to improve airflow and aesthetics. Use zip ties or cable straps to secure them.
- Affaire close : Une fois toutes les connexions sécurisées et vérifiées, fermez le boîtier de votre ordinateur.
Image : Un angle view of the Kolink Regulator 850W Power Supply Unit, showcasing son noir casing and fan grille, ready for installation.
5. Mode d'emploi
- Branchez l'alimentation CA : Plug the provided AC power cord into the PSU's power inlet and then into a wall outlet or surge protector.
- Alimentation sous tension : Locate the power switch on the rear of the PSU (next to the AC inlet) and flip it to the 'I' (On) position.
- Allumer l'ordinateur : Appuyez sur le bouton d'alimentation de votre ordinateur pour démarrer votre système.
Semi-Fanless Mode Operation
The KOLINK Regulator PSU features a semi-fanless mode. This means the 120mm FDB fan will remain off or spin at very low RPMs during low system loads to minimize noise. As the system load increases and the internal temperature rises, the fan will automatically activate and adjust its speed to maintain optimal cooling. This operation is normal and contributes to a quieter computing experience.
6. Entretien
Proper maintenance ensures the longevity and optimal performance of your PSU.
- Gardez les évents dégagés : Ensure that the PSU's intake and exhaust vents are not obstructed by dust, cables, or other objects. Good airflow is crucial for cooling.
- Nettoyage de la poussière : Periodically clean dust from the PSU's exterior and fan grille using compressed air. N'ouvrez pas le bloc d'alimentation casing.
- Conditions environnementales : Operate the PSU within recommended temperature and humidity ranges. Avoid extreme conditions.
7. Dépannage
If you encounter issues with your KOLINK Regulator PSU, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Le système ne s’allume pas. | PSU power switch off, AC cable loose, faulty wall outlet. | Ensure PSU switch is 'On'. Check AC power cable connection. Test wall outlet with another device. Verify all modular cables are securely connected. |
| Le système s'allume mais s'éteint inopinément. | Overload, overheating, loose connections, component fault. | Assurez-vous que le système total soittage does not exceed 850W. Check for proper airflow. Verify all modular cables are fully seated. If problem persists, test components individually. |
| Le ventilateur du bloc d'alimentation ne tourne pas. | Semi-fanless mode active, low system load. | This is normal operation in semi-fanless mode. The fan will activate under higher loads. If the fan never spins even under heavy load, contact support. |
| Bruit inhabituel provenant du bloc d'alimentation. | Loose screws, fan obstruction, coil whine. | Check PSU mounting screws. Ensure no cables or debris are obstructing the fan. Minor coil whine can be normal; if excessive, contact support. |
If troubleshooting steps do not resolve the issue, please contact KOLINK customer support.
8. Spécifications
Detailed technical specifications for the KOLINK Regulator Series 850W PSU:
| Fonctionnalité | Spécification |
|---|---|
| Numéro de modèle | KL-R850FG |
| Puissance de sortietage | 850 watts |
| Cote d'efficacité | 80 PLUS Gold |
| Facteur de forme | ATX |
| Conception de l'alimentation | Entièrement modulaire |
| Méthode de refroidissement | Air (120mm FDB fan with semi-fanless mode) |
| Condensateurs | Condensateurs 100% japonais |
| Type de connecteur | 12VHPWR, 24-pin ATX, 4+4 pin CPU, 6+2 pin PCIe, SATA, Peripheral |
| Dimensions du produit (L x l x H) | 11.61 x 8.46 x 4.33 pouces |
| Poids de l'article | 5.5 livres |
| Appareils compatibles | Gaming PC with ATX motherboard and high-end graphics card |
Image: The rear panel of the Kolink Regulator PSU, displaying the electrical specifications label, power input, and on/off switch.
9. Garantie et assistance
Informations sur la garantie
KOLINK products are manufactured to the highest quality standards. This PSU is covered by a manufacturer's warranty against defects in materials and workmanship. The specific warranty period may vary by region and retailer. Please retain your proof of purchase for warranty claims.
Assistance clientèle
For technical assistance, warranty inquiries, or further information, please visit the official KOLINK website or contact your local retailer. You can often find support resources, FAQs, and contact details on the manufacturer's website: www.kolink.eu
