1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your BAIZIFU 36V/48V Waterproof Brushless Motor Speed Controller. This controller is designed for electric bicycles and scooters, supporting motors with power ratings from 150W to 300W. Please read this manual thoroughly before use to ensure proper function and safety.
2. Précautions de sécurité
- Coupez toujours l'alimentation électrique avant d'effectuer toute installation, maintenance ou dépannage.
- Ensure all connections are secure and correctly wired to prevent short circuits or damage.
- Vérifiez que le volume d'entréetage (36V/48V) matches your battery system.
- Avoid exposing the controller to extreme temperatures or direct impact.
- Although waterproof, avoid submerging the controller in water for extended periods.
- En cas de doute sur une étape quelconque, consultez un technicien qualifié.
3. Produit terminéview
3.1 Caractéristiques
- 36V/48V Rated Voltage
- 150-300 Watts Rated Power
- Designed for electric bicycles and scooters, including mechanical or electric forklifts.
- Brushless Controller technology for efficient operation.
- Conception étanche pour une durabilité accrue.
3.2 Spécifications
| Attribut | Valeur |
|---|---|
| Marque | BAIZIFU |
| Voltage | 36 V / 48 V |
| Puissance nominale | 150 W - 300 W |
| Matériel | Aluminium |
| Poids de l'article | 8 onces (0.5 livre) |
| Dimensions du colis | 3 x 3 x 2.1 pouces |
| Garantie | 1 an |
3.3 Composants du produit
4. Guide d'installation
Follow these steps to correctly install your brushless motor controller. Refer to the wiring diagram for visual guidance.
- Connect Motor Wire: Connect the motor wire from the controller to your motor. Ensure the connectors are firmly seated.
- Connectez le câble d'alimentation : Connect the power cable from the controller to your battery. Observe correct polarity (red to positive, black to negative).
- Connect Speed Control Line: Attach the speed control line to your throttle switch or handle.
- Connect Switch Wire: Connect the switch wire to your on-off switch.
- Connexions sécurisées : Vérifiez minutieusement que toutes les connexions sont bien serrées et correctement positionnées.
- Contrôleur de montage : Securely mount the controller in a suitable location on your electric bicycle or scooter, ensuring it is protected from physical damage and excessive heat.
4.1 Vidéo d'installation
Video: This video demonstrates the process of connecting the brushless motor and controller to a power source, illustrating the wiring steps for a functional setup.
5. Instructions d'utilisation
Once the controller is correctly installed, follow these steps to operate your electric vehicle:
- Mise sous tension : Turn on the main power switch connected to the controller.
- Commande d'accélérateur : Use the throttle handle or switch to control the motor speed. Gradually increase the throttle for smooth acceleration.
- Surveiller les performances : Pay attention to the motor's response and any unusual sounds during operation.
- Éteindre: When finished, turn off the main power switch to disconnect power to the controller and motor.
6. Maintenance et entretien
- Inspection régulière : Periodically check all wiring connections for any signs of wear, corrosion, or looseness.
- Nettoyage: Keep the controller clean and free from dust and debris. Use a dry cloth for cleaning. Avoid using harsh chemicals.
- Protection de l'environnement : While waterproof, protect the controller from prolonged exposure to heavy rain or direct water jets.
- Stockage: If storing the vehicle for an extended period, ensure the controller is disconnected from the battery.
7. Guide de dépannage
If you encounter issues with your motor controller, refer to the table below for common problems and solutions.
| Problème | Cause possible | Solution |
|---|---|---|
| Le moteur ne démarre pas | No power, loose connections, faulty switch. | Check battery charge, verify all wiring connections, test the on-off switch. |
| Le moteur tourne par intermittence | Loose wiring, intermittent power supply, throttle issue. | Inspect all connections, check battery output, test throttle functionality. |
| Motor runs but no speed control | Faulty throttle, speed control line disconnected. | Check speed control line connection, test or replace throttle. |
| La manette chauffe excessivement. | Overload, poor ventilation, short circuit. | Réduisez la charge, assurez une bonne circulation d'air autour du contrôleur, vérifiez l'absence de courts-circuits dans le câblage. |
Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client.
8. Garantie et assistance
8.1 Informations sur la garantie
This BAIZIFU Brushless Motor Controller comes with a Garantie de 1 ans from the date of purchase. The warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, unauthorized modifications, or normal wear and tear.
To claim warranty service, please retain your proof of purchase and contact our customer support team.
8.2 Assistance clientèle
For technical assistance, troubleshooting, or warranty inquiries, please contact BAIZIFU customer support through the retailer's platform or the official brand website. Please have your product model number (B0CJ3DPVC6) and purchase details ready when contacting support.