Tapis chauffant pour reptiles REPTITRIP avec thermostat PID (modèle 8 x 12" - 24 W) - Manuel d'utilisation

Introduction

This manual provides instructions for the safe and effective use of your REPTITRIP Reptile Heating Pad with PID Thermostat. This device is designed to provide a controlled heat source for reptile terrariums, helping to maintain a stable and appropriate temperature for your pets. Please read all instructions carefully before installation and operation.

Informations importantes sur la sécurité

Le non-respect de ces consignes de sécurité peut entraîner un incendie, une électrocution, des blessures ou des dommages au produit ou aux biens.

• This product is intended for household use only, specifically for heating reptile terrariums.
• Do not immerse the heating pad or thermostat controller in water. The heating pad is waterproof (IP67 rated) but not designed for submersion.
• Do not use the heating pad if it is folded or creased. Ensure it lies flat.
• Do not use the heating pad directly on a metal tank, as this can lead to inefficient heating or damage.
• Prolonged application at high temperature settings can cause skin burns to animals. Always monitor the temperature carefully.
• Discontinue use immediately if the heating pad shows any signs of deterioration, such as cracking, blistering, or melting.
• The heating pad features a built-in temperature sensor that will stop heating if the internal temperature reaches 122°F (50°C) to prevent overheating.
• Keep out of reach of children and pets not intended for its use.

Produit terminéview

The REPTITRIP Reptile Heating Pad system includes a heating mat and an intelligent PID thermostat controller. It is designed to provide precise and stable temperature control for reptile habitats.

Caractéristiques principales :

• PID Intelligent Thermostat: Accurately controls heating temperature for efficiency and stability.
• Chauffage rapide : 24W power heats to 113°F (45°C) in approximately 1 minute.
• Protection haute température : Automatically stops heating at 122°F (50°C).
• Détection de température: Built-in sensor and external probe for real-time temperature monitoring.
• Construction durable : 5-layer design including PVC material, lagging, and heating layer.
• Conception imperméable à l'eau: IP67 rated heating pad (do not immerse).
• Support adhésif : Equipped with 3M adhesive for secure mounting.

Instructions d'installation

1. Choisissez l'emplacement: Select a suitable location for the heating pad, typically on the bottom or side of a glass terrarium. Ensure the surface is clean and dry.
2. Apply Heating Pad: Remove the protective film from the 3M adhesive backing on the heating pad. Carefully press the pad firmly onto the chosen surface of the terrarium. Ensure there are no air bubbles or wrinkles.
3. Sonde de température de position : Place the external temperature probe inside the terrarium, near the area where the heat is needed most, but away from direct contact with the heating pad to ensure accurate ambient temperature readings. Secure it to prevent movement.
4. Connecter le thermostat : Plug the heating pad into the thermostat controller. Then, plug the thermostat controller into a standard electrical outlet.

Mode d'emploi

The PID thermostat controller allows for precise temperature management. The controllable temperature range is 68°F to 113°F (20°C to 45°C).

Fonctions du contrôleur :

• Écran LCD : Shows current time, sensor temperature, set temperature, and power percentage.
• Bouton marche/arrêt : Appuyez et maintenez la pression pour allumer ou éteindre l'appareil.
• Bouton de réglage: Appuyez pour accéder au mode de réglage de la température.
• Bouton « + » : Increases the set temperature or navigates menu options.
• '-' Bouton: Decreases the set temperature or navigates menu options.
• Bouton OK : Confirme les sélections.

Réglage de la température :

1. Appuyez sur le ENSEMBLE button. The set temperature display will begin to flash.
2. Utilisez le + or - boutons pour régler la température désirée.
3. Appuyez sur le OK button to confirm your setting. The display will stop flashing.

Switching Between °F and °C:

To switch the temperature display between Fahrenheit (°F) and Celsius (°C), long press the ENSEMBLE bouton et le + bouton simultanément.

Entretien

• Nettoyage: Disconnect the power before cleaning. Wipe the heating pad and controller with a damp tissu. N'utilisez pas de nettoyants abrasifs et ne plongez pas dans l'eau.
• Inspection: Regularly inspect the heating pad and power cords for any signs of damage, wear, or deterioration. If any damage is observed, discontinue use and replace the unit.
• Stockage: When not in use, store the heating pad and controller in a dry, cool place, away from direct sunlight and extreme temperatures.

Dépannage

• No Power/Heating:
  • Assurez-vous que le cordon d'alimentation est correctement branché dans une prise électrique fonctionnelle.
  • Check if the thermostat controller is powered on (press and hold the ON/OFF button).
  • Verify that the heating pad is correctly plugged into the thermostat controller.
• Lecture de température incorrecte :
  • Ensure the external temperature probe is properly positioned within the terrarium and not directly touching the heating pad or other heat sources.
  • Check for any obstructions around the probe that might affect its reading.
• Fluctuations de température :
  • The PID system is designed for stable control, but significant external temperature changes or drafts can affect stability.
  • Ensure the terrarium is adequately insulated and placed in a stable environment.
• Heating Pad Overheating (reaching 122°F/50°C):
  • The built-in protection will temporarily stop heating. This is a safety feature.
  • Check if the set temperature is too high for the environment or if the pad is covered by insulating material that traps excessive heat.

Caractéristiques

Garantie et support client

For warranty information, technical assistance, or customer support, please refer to the contact information provided with your purchase or visit the official REPTITRIP webConsultez le site. Conservez votre reçu d'achat comme preuve d'achat.