ESKY 150 EC Micro RC Helicopter Instruction Manual

Introduction

This manual provides essential instructions for the safe and effective operation of your ESKY 150 EC Micro RC Helicopter. The 150 EC is a third-generation micro remote-controlled helicopter designed for ease of operation. It features a 6-axis gyroscope for stable flight, atmospheric pressure and altitude hold capabilities, hovering, and a controllable flight path. It also includes a one-button shutdown function for emergency situations.

Qu'y a-t-il dans la boîte

Carefully unpack all components and ensure all items listed below are present. If any items are missing or damaged, please contact customer support.

• 1 hélicoptère ESKY 150 EC
• 1 x MINI 6X 6-Channel 2.4GHz Transmitter (Remote Control)
• 1 x 1S 3.7V 150mAh 20C Li-Po Battery (for helicopter)
• 2 x Main Blades (spare)
• 1 x Tail Blade (spare)
• 1 x chargeur USB
• 2 tournevis
• 1 x Manuel d'utilisation (ce document)

Image: All components included in the ESKY 150 EC package.

Produit terminéview

Composants d'hélicoptères

Image : Côté view of the ESKY 150 EC helicopter.

The ESKY 150 EC helicopter features a durable frame, main rotor blades, a tail rotor, landing skids, and a removable canopy. The main rotor provides lift and control, while the tail rotor controls yaw (left/right rotation).

Télécommande (émetteur)

The MINI 6X 6-Channel 2.4GHz transmitter is used to control the helicopter. Familiarize yourself with its various controls:

Image: Labeled diagram of the MINI 6X Remote Control.

• Changement de mode : Changes flight modes (e.g., beginner/advanced).
• Indicateur LED d'alimentation : Affiche l'état de l'alimentation.
• Interrupteur de coupure des gaz : Immediately cuts power to the motor.
• Rudder (Left/Right): Controls the helicopter's yaw.
• Accélérateur (Haut/Bas) : Contrôle la vitesse et l'altitude du rotor principal.
• Aileron (Left/Right): Controls the helicopter's roll (side-to-side movement).
• Elevator (Up/Down): Controls the helicopter's pitch (forward/backward movement).
• Trim Controls (Throttle, Rudder, Aileron, Elevator): Fine-tune controls to correct unwanted drift.
• Interrupteur: Turns the remote control ON/OFF (hold down for ON/OFF).

Installation

1. Chargement de la batterie de l'hélicoptère

The helicopter uses a 1S 3.7V 150mAh Li-Po battery. Always use the provided USB charger.

1. Branchez le chargeur USB à une source d'alimentation USB (par exemple, un port USB d'ordinateur, un adaptateur secteur USB).
2. Connect the helicopter battery to the USB charger. Ensure the polarity is correct.
3. Le voyant lumineux du chargeur indiquera l'état de charge (reportez-vous aux instructions du chargeur pour connaître les schémas lumineux spécifiques).
4. Une fois la charge terminée, débranchez la batterie du chargeur. Ne surchargez pas la batterie.

Image: Connecting the Li-Po battery to the USB charger.

2. Installing the Helicopter Battery

Ensure the helicopter is powered off before installing the battery.

1. Gently remove the helicopter's canopy to access the battery compartment.
2. Insert the charged Li-Po battery into the compartment.
3. Connect the battery plug to the helicopter's power port.
4. Carefully reattach the canopy.

Image: Helicopter with canopy removed, revealing the battery compartment.

Image: Battery inserted into the helicopter.

3. Mise sous tension et liaison

The helicopter and remote control must be bound (paired) before flight.

1. Placez l'hélicoptère sur une surface plane et horizontale.
2. Ensure the remote control's throttle stick is in the lowest position.
3. Mettez l'hélicoptère sous tension. Le voyant de l'hélicoptère clignotera.
4. Press and hold the Power Switch on the remote control until it turns on. The remote control's indicator light will flash.
5. Wait for a few seconds. The indicator lights on both the helicopter and remote control should become solid, indicating a successful binding.
6. If binding fails, turn off both devices and repeat the process.

Mode d'emploi

Always operate the helicopter in an open, safe area, away from people, animals, and obstacles. Ensure you have sufficient space for flight.

Commandes de vol de base

• Manette des gaz (manche gauche haut/bas) : Increases or decreases the main rotor speed, controlling ascent and descent.
• Gouvernail (manche gauche gauche/droite) : Controls the helicopter's rotation around its vertical axis (yaw).
• Ascenseur (Manette droite Haut/Bas) : Controls forward and backward movement (pitch).
• Aileron (manche droit gauche/droite) : Controls side-to-side movement (roll).

Le décollage et l'atterrissage

1. Décoller: Slowly push the throttle stick up. The helicopter will gain altitude. Maintain a steady throttle to achieve a stable hover.
2. Atterrissage: Slowly pull the throttle stick down. The helicopter will descend. Reduce throttle completely upon landing.

Altitude Hold and Hover

The 150 EC is equipped with a 6-axis gyroscope and atmospheric pressure sensor for stable flight and altitude hold. Once the helicopter reaches a desired altitude, release the throttle stick to its center position. The helicopter will attempt to maintain its current height.

Flight Modes (Hi/Lo)

The remote control features a Mode Switch. It is recommended to use the "Hi" mode for more stable and responsive flight. The "Lo" mode may exhibit a slight delay in controller response.

One-Button Shutdown

In an emergency or if the helicopter is out of control, use the Throttle Cut Switch to immediately stop the motors. This function can also be used for a quick, controlled shutdown after landing.

Entretien

Nettoyage

Wipe the helicopter and remote control with a soft, dry cloth after each use. Avoid using water or chemical cleaners, as they can damage electronic components.

lame de rechange

If main or tail blades become damaged, replace them with the provided spares using the included screwdriver. Ensure blades are securely fastened but not overtightened.

Image : détaillée views of helicopter components, including rotor attachment points.

Entretien de la batterie

• Utilisez toujours le chargeur d'origine.
• Ne surchargez pas et ne déchargez pas excessivement la batterie.
• Conservez les piles dans un endroit frais et sec, à l'abri de la lumière directe du soleil et de la chaleur.
• Si la batterie gonfle ou présente des signes de dommages, cessez immédiatement de l'utiliser et jetez-la correctement.

Dépannage

Caractéristiques

• Numéro de modèle : 150 CE
• Fabricant: ESKY
• Système de contrôle: Gyroscope à axe 6
• Caractéristiques: Height Hold, Hover, One-button Shutdown
• Batterie d'hélicoptère : 1S 3.7V 150mAh Li-Po (included)
• Télécommande: MINI 6X 6-Channel 2.4GHz Transmitter
• Âge recommandé : 14 ans et plus
• Poids de l'article : Environ 1.05 livres (emballage compris)
• Dimensions du colis : 8.3 x 7.1 x 3.8 pouces

Image: ESKY 150 EC Helicopter dimensions.

Consignes de sécurité

Please read and adhere to these safety guidelines to prevent injury or damage.

• Always operate the helicopter in an open area, away from people, pets, and obstacles.
• Ne volez pas à proximité des lignes électriques, des routes ou des plans d'eau.
• Tenez vos doigts et vos vêtements amples éloignés des lames rotatives.
• Never fly in strong winds or adverse weather conditions.
• La présence d'un adulte est recommandée pour les utilisateurs de moins de 14 ans.
• Do not attempt to modify the helicopter or its components.
• Éteignez l'hélicoptère et la télécommande lorsqu'ils ne sont pas utilisés.

Garantie et assistance

Information regarding product warranty and customer support contact details is not available in the provided product data. Please refer to the product packaging or the seller's webConsultez le site pour connaître les conditions de garantie spécifiques et les options d'assistance.

Vidéos officielles des produits

No official product videos from the seller were provided in the product data.