Xnbada RC01RF Wireless 2.4G RF 4-Zone Single Color Remote Control User Manual

1. Introduction

The Xnbada RC01RF is a wireless 2.4G RF remote control designed for single color LED strip lights. It offers 4-zone control, allowing you to manage multiple groups of LED strips independently or simultaneously. This remote features precise brightness adjustment and operates wirelessly up to 30 meters (98 feet), providing flexible control without complex wiring. It is compatible with Xnbada C01W, C01Z, and C01RF single color controllers.

2. Consignes de sécurité

• Lisez attentivement toutes les instructions avant utilisation.
• Cet appareil est destiné à être utilisé en intérieur uniquement.
• Do not expose the remote control to moisture or extreme temperatures.
• Utilisez uniquement des piles AAA conformes aux spécifications. Veillez à respecter la polarité lors de l'insertion des piles.
• Tenir hors de portée des enfants.
• Do not attempt to disassemble or repair the remote control. This will void the warranty.

3. Contenu du colis

Vérifiez que tous les éléments sont présents dans votre colis :

• Xnbada RC01RF Wireless Remote Control (Single Color)
• Support de montage mural
• Vis de montage (2x)

Image: The Xnbada RC01RF remote control shown with its included wall mount holder and two mounting screws.

4. Produit terminéview

The RC01RF remote control features an intuitive layout for easy operation of your single color LED strip lights. Below is a diagram illustrating the functions of each button.

Image: Diagram showing the Xnbada RC01RF remote control with labels for each button's function, including ON/OFF, brightness adjustment, and zone selection.

• Bouton MARCHE : Appuyez pour allumer tous les appareils connectés.
• Bouton OFF : Appuyez pour éteindre tous les appareils connectés.
• Brightness Ring: Touch the slider to adjust brightness from 1% to 100%.
• Brightness Up (☀): Appuyez pour augmenter la luminosité.
• Brightness Down (☁): Appuyez pour diminuer la luminosité.
• Bouton M : Cycles through dynamic modes (if supported by the connected controller for single color).
• 30 % de luminosité : Press to set brightness to 30%.
• 60 % de luminosité : Press to set brightness to 60%.
• 100 % de luminosité : Press to set brightness to 100%.
• S- Button: Decreases dynamic mode speed.
• Bouton S+ : Increases dynamic mode speed.
• Zone 1-4 Buttons: Press to select a specific zone for control. Press and hold to link/unlink a controller to that zone.

5. Installation

5.1 Installation de la batterie

The RC01RF remote control requires two AAA batteries (not included).

1. Repérez le couvercle du compartiment à piles à l'arrière de la télécommande.
2. Faites glisser le couvercle pour l'ouvrir.
3. Insérez deux piles AAA en respectant la polarité (+ et -).
4. Remettez le couvercle du compartiment à piles en place jusqu'à ce qu'il s'enclenche correctement.

5.2 Pairing the Remote Control with a Controller

The RC01RF remote control uses 2.4G RF technology for a fast and direct connection to compatible controllers (e.g., C01W, C01Z, C01RF) without requiring Wi-Fi, Bluetooth, or an app.

1. Ensure your LED strip controller is powered off.
2. Power on the LED strip controller.
3. Within 3 seconds of powering on the controller, press and hold one of the Zone buttons (1, 2, 3, or 4) on the RC01RF remote control.
4. If pairing is successful, the connected LED strip will flash three times. This indicates the controller is now linked to the selected zone on your remote.
5. Repeat this process for other controllers if you wish to assign them to different zones (1-4). Each zone can control multiple controllers.

To unlink a controller from a zone, power cycle the controller, and within 3 seconds, press the corresponding Zone button 5 times quickly. The LED strip will flash 10 times to confirm unlinking.

5.3 Installation murale

The included wall mount holder allows for convenient storage and access to your remote control.

1. Choisissez un emplacement approprié sur un mur ou une surface plane.
2. Use the wall mount holder as a template to mark the positions for the two mounting screws.
3. Percez des trous pilotes si nécessaire.
4. Secure the wall mount holder to the surface using the provided screws.
5. Insérez la télécommande dans le support.

Image: The Xnbada RC01RF remote control shown securely placed in its wall-mounted holder, demonstrating flexible placement options.

6. Mode d'emploi

6.1 Basic Control (All Zones)

• Allume / éteint: Appuyez sur le ON bouton pour allumer toutes les lumières connectées. Appuyez sur le DÉSACTIVÉ bouton pour éteindre toutes les lumières connectées.
• Réglage de la luminosité : Touchez le Anneau de luminosité to smoothly adjust the light intensity from 1% to 100%. Alternatively, use the Luminosité vers le haut (☀) et Luminosité vers le bas (☁) buttons for incremental adjustments.
• Luminosité prédéfinie : Use the dedicated buttons to quickly set brightness to 30%, 60%, ou 100%.

Image: An illustration demonstrating brightness adjustment using the remote control in a kitchen setting, showing a slider for precise control.

6.2 4-Zone Group Control

The RC01RF remote allows you to control up to four independent zones of single color LED strip lights.

• Sélectionnez une zone : Appuyez sur le Zone button (1, 2, 3, or 4) to select that zone. Once selected, any commands (ON/OFF, brightness) will only apply to the controllers linked to that specific zone.
• Control All Zones: To control all linked zones simultaneously, ensure no specific zone button is actively selected (or press the currently active zone button again to deselect it, if applicable, or simply use the master ON/OFF).
• Auto-Transmission: The remote control utilizes an auto-transmission feature. If a controller is within 30 meters of another controller, the signal can be transmitted, extending the effective control distance for larger installations.

Image: Diagram illustrating the simultaneous auto-transmission feature, where the remote signal is relayed between controllers within a 30-meter range, extending control distance.

6.3 Dynamic Modes (if applicable)

If your connected single color controller supports dynamic modes (e.g., flashing, fading effects), you can activate them:

• Appuyez sur le Touche M to cycle through available dynamic modes.
• Utilisez le S- et S+ buttons to decrease or increase the speed of the selected dynamic mode.

7. Entretien

7.1 Remplacement de la batterie

When the remote control's range decreases or it becomes unresponsive, it may be time to replace the batteries.

1. Suivez les étapes de la section 5.1 pour ouvrir le compartiment de la batterie.
2. Retirez les piles AAA usagées.
3. Insérez deux piles AAA neuves en respectant la polarité.
4. Fermez le compartiment à piles.

Jetez les piles usagées conformément aux réglementations locales.

7.2 Nettoyage

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the remote in water.

8. Dépannage

9. Spécifications

Image: A visual representation of various compatible Xnbada LED controllers, including C01W, C02W, C03W, C04W, C05W, WB5, FUT037, C01Z, C02Z, C03Z, C04Z, C05Z, LM051, and LM053.

10. Garantie et assistance

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Xnbada store on Amazon:

Xnbada Official Store

If you encounter any issues not covered in this manual, please contact Xnbada customer service for assistance.