Lezonic PI-120LED-8M

Manuel d'utilisation de la guirlande lumineuse à boules LED Lezonic PI-120LED-8M de 15 m (120 LED).

Model: PI-120LED-8M

1. Introduction

Thank you for choosing the Lezonic PI-120LED-8M 15m 120 LED Ball String Lights. This product is designed to provide versatile and vibrant lighting for various indoor and outdoor decorative purposes. Featuring 120 multicolored LED bulbs, 8 lighting modes, and a waterproof design, these lights are controlled via an included remote for ease of use. Please read this manual carefully before installation and operation to ensure safe and optimal performance.

2. Consignes de sécurité

  • Ensure the power adapter is connected to a suitable power outlet (DC current).
  • Do not attempt to modify or repair the product. Contact customer support if issues arise.
  • Keep the power adapter dry. While the lights are waterproof (IP65), the adapter is not designed for direct exposure to heavy rain or submersion.
  • Avoid wrapping the string lights too tightly around sharp objects or surfaces that could damage the cable.
  • Débranchez les lampes de la source d'alimentation lorsqu'elles ne sont pas utilisées ou avant de les nettoyer.

3. Contenu du colis

  • 1 x Lezonic 15m 120 LED Ball String Lights
  • 1 x adaptateur secteur
  • 1 x télécommande

4. Instructions de configuration

  1. Déballer: Retirez soigneusement la guirlande lumineuse, l'adaptateur secteur et la télécommande de leur emballage.
  2. Se détendre: Gently unwind the string lights, ensuring there are no tangles or knots.
  3. Position: Determine the desired location for your lights. These lights are suitable for both indoor and outdoor use, such as decorating walls, trees, fences, or furniture.
  4. Connecter l'alimentation : Connect the string lights to the provided power adapter. Ensure the connection is secure.
  5. Brancher: Branchez l'adaptateur secteur dans une prise électrique standard. Les lumières devraient s'allumer.
Lezonic 15m 120 LED Ball String Lights illuminating a house, with the power adapter and remote control visible.
This image displays the complete Lezonic 15m 120 LED Ball String Lights set, including the string of multicolored globe lights, the power adapter, and the remote control. The lights are shown decorating the exterior of a house, demonstrating their use in an outdoor setting.
Diagram illustrating the total length of the Lezonic LED string lights, including the power cable and the light string.
A diagram showing the physical dimensions of the string lights. It indicates a power cable and the total length of the light string, with individual bulbs spaced apart.

5. Mode d'emploi

The Lezonic LED Ball String Lights are operated using the included remote control. Ensure the remote has a working battery and is pointed towards the receiver on the power adapter.

Fonctions de la télécommande :

  • MARCHE/ARRÊT : Appuyez pour allumer ou éteindre les lumières.
  • TIMER (6H/8H): Activates the timer function. The lights will stay on for 6 or 8 hours, then automatically turn off for 18 or 16 hours, and repeat the cycle.
  • DIM+/DIM- : Régle le niveau de luminosité des lumières.
  • Mode Buttons (1-8): Selects one of the 8 distinct lighting modes:
    1. Combinaison
    2. En Vague
    3. Séquentiel
    4. Slo-Glo
    5. Chasing/Flash
    6. Fondu lent
    7. Scintillement/Flash
    8. Reste sur la bonne voie
Détaillé view of the Lezonic remote control for the LED string lights, showing buttons for power, timer, brightness, and 8 lighting modes.
Cette image offre une vue claire view of the remote control unit. It features buttons for 'ON' and 'OFF', a 'TIMER' button with 6H and 8H options, brightness adjustment buttons ('DIM+' and 'DIM-'), and numbered buttons (1-8) corresponding to the different lighting modes.

6. Entretien

  • Nettoyage: To clean the lights, ensure they are unplugged. Gently wipe the bulbs and cable with a soft, damp tissu. N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.
  • Stockage: When not in use, unplug the lights and carefully coil them to prevent tangling. Store them in a cool, dry place away from direct sunlight.
  • Caractéristique étanche : The lights have an IP65 waterproof rating, meaning they are protected against dust and low-pressure water jets. This makes them suitable for outdoor use in various weather conditions, but they should not be submerged in water.
Close-up of Lezonic LED ball string lights with water droplets, highlighting the IP65 waterproof rating.
This image focuses on the individual LED light balls, covered in water droplets, with a graphic indicating 'IP65 waterproof'. It visually confirms the product's resistance to water, making it suitable for outdoor use.

7. Dépannage

  • Les lumières ne s'allument pas :
    • Ensure the power adapter is securely plugged into both the lights and the wall outlet.
    • Vérifiez le bon fonctionnement de la prise murale en y branchant un autre appareil.
    • Appuyez sur le bouton « ON » de la télécommande.
  • La télécommande ne fonctionne pas :
    • Ensure the remote control is pointed directly at the receiver on the power adapter.
    • Vérifiez si la pile de la télécommande doit être remplacée.
    • Assurez-vous qu'aucun obstacle ne se trouve entre la télécommande et le récepteur.
  • Lights flickering or dim:
    • Vérifiez que la connexion électrique n'est pas desserrée.
    • Adjust the brightness using the 'DIM+' button on the remote.

8. Spécifications

FonctionnalitéDétail
MarqueLézonique
Numéro de modèlePI-120LED-8M
FabricantAaronic Tech Co.,Ltd.
Longueur totale15 mètres (environ 49 pieds)
Nombre d'ampoules120 LED
Type d'ampouleDIRIGÉ
Couleur claireMulticolore
Quoitage5 watts
Source d'énergieDC Current (Plug-in)
Dossier spécialÉtanchéité IP65
Méthode de contrôleTélécommande
Modes d'éclairage8 modes (Combination, In Wave, Sequential, Slo-Glo, Chasing/Flash, Fondu lent, Scintillement/Flash, Allumé en continu)
MatérielPlastique
Poids de l'article570 g

9. Garantie et assistance

This Lezonic product comes with a Garantie de 12 mois from the date of purchase. If you encounter any issues or have questions regarding your product, please contact our customer support team. All inquiries will be responded to within 18 hours.

For support, please refer to the contact information provided with your purchase or visit the official Lezonic website.

Documents connexes - PI-120LED-8M

Préview Guirlande lumineuse solaire LQWELL en PVC - 8 m, 30 LED pour la décoration extérieure
Découvrez la lanterne solaire en PVC LQWELL. Cette guirlande lumineuse de 8 mètres, composée de 30 LED, offre 2 modes d'éclairage, une lanterne étanche de 7.5 cm de diamètre et une construction robuste en PVC. Idéale pour la décoration extérieure, les terrasses, les fêtes et les mariages. Installation facile et allumage automatique du crépuscule à l'aube.
Préview FEIT Electric 48 ft LED String Lights Installation Guide (SL48-24/FIL)
Installation and safety guide for FEIT Electric 48 ft (14.6m) LED string lights, model SL48-24/FIL. Includes instructions for setup, bulb replacement, connecting multiple sets, and important safety precautions.
Préview Sapin de Noël pliable à couleurs changeantes de 1.8 m - Manuel d'instructions
Instructions de montage et de sécurité pour le sapin de Noël pop-up de 1.8 m aux couleurs changeantes de The Jolly Sleigh Company. Découvrez comment installer et utiliser en toute sécurité votre décoration de Noël.
Préview Arbre à fibres optiques Premier Decorations 1.8 m FT183050 - Instructions pour usage intérieur uniquement
Guide d'utilisation et consignes de sécurité pour l'arbre à fibres optiques Premier Decorations de 1.8 m (modèle FT183050). Découvrez comment installer, utiliser et utiliser en toute sécurité ce produit d'éclairage décoratif d'intérieur.
Préview A Brief Guide to Migrating Raspberry Pi OS from Buster to Bullseye
Learn about the key differences between Raspberry Pi OS Buster and Bullseye, including changes in graphics (KMS), camera support (libcamera), display configurations, and more. This guide provides essential information for a smooth migration.
Préview Dépannage de la sortie HDMI KMS sur Raspberry Pi
Un guide complet pour résoudre les problèmes de sortie HDMI avec le pilote graphique KMS sur les appareils Raspberry Pi, couvrant les problèmes courants, les symptômes et les stratégies d'atténuation.