IRRADIO Simplified Universal Remote Control with Learning Function

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your IRRADIO Simplified Universal Remote Control. This remote is designed for ease of use, featuring a learning function to replicate commands from your original remote control. Its simplified layout and large buttons make it suitable for users of all ages.

2. Produit terminéview

The IRRADIO Simplified Universal Remote Control is an infrared remote with a minimalist design. It features essential buttons for common functions, making it straightforward to operate.

Image 2.1: Devant view of the IRRADIO Simplified Universal Remote Control. It features large, clearly labeled buttons for power, volume, channel, and two programmable auxiliary buttons (A and B).

Fonctions des boutons :

• Bouton d'alimentation (rouge) : Allume ou éteint l'appareil.
• AV Button (Mute): Toggles audio mute or switches AV input (programmable).
• V+ / V-: Augmente ou diminue le volume.
• P+ / P- : Change de chaîne (vers le haut ou vers le bas).
• Boutons A/B : Two additional programmable buttons for frequently used functions.
• Indicator LED (Red dots): Lights up during button press and programming.

3. Configuration : Installation de la batterie

The remote control requires 2x AAA/LR03 1.5V batteries (not included).

1. Localisez le compartiment à piles à l'arrière de la télécommande.
2. Faites glisser le couvercle du compartiment à piles pour l'ouvrir.
3. Insert two AAA/LR03 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. Fermez soigneusement le couvercle du compartiment à piles.

Note: The remote retains programmed memory even after battery replacement.

4. Operating Instructions: Programming the Remote Control

This universal remote uses a learning function to copy signals from your original remote control. You will need a functional original remote for programming.

Étapes de programmation :

1. Préparation: Place the IRRADIO universal remote and your original remote control on a flat surface, facing each other, with their infrared emitters aligned at a distance of approximately 1-3 cm.
2. Entrez en mode d'apprentissage : Appuyez et maintenez enfoncé le Pouvoir bouton et le AV button simultaneously on the IRRADIO remote for about 3 seconds. The red indicator LED will light up continuously, indicating the remote is in learning mode.
3. Sélectionnez le bouton à programmer : Press the button on the IRRADIO remote that you wish to program (e.g., V+, P+, A, B). The red indicator LED will start blinking slowly, waiting for a signal.
4. Signal de transmission : Press and hold the corresponding button on your original remote control (e.g., Volume Up, Channel Up). Keep holding it until the IRRADIO remote's LED blinks rapidly three times and then lights up continuously again. This indicates successful learning.
5. Programmer plus de boutons : Repeat steps 3 and 4 for each button you wish to program.
6. Quitter le mode d'apprentissage : Une fois tous les boutons souhaités programmés, appuyez sur Pouvoir button on the IRRADIO remote to exit learning mode. The red indicator LED will turn off.

Remarques importantes :

• If the LED does not blink rapidly or turns off during programming, the learning process may have failed. Try again, ensuring proper alignment and battery levels in both remotes.
• Ensure the original remote has sufficient battery power for signal transmission.
• The remote can be reprogrammed infinitely.

5. Entretien

Remplacement de la batterie :

When the remote control's response becomes sluggish or the indicator LED does not light up, it is time to replace the batteries. Follow the battery installation steps in Section 3.

Nettoyage:

Pour nettoyer la télécommande, utilisez un chiffon doux et sec. N’utilisez pas de produits abrasifs, de solvants ni de chiffons humides, car ils pourraient endommager sa surface ou ses composants internes.

6. Dépannage

• La télécommande ne répond pas :
  • Vérifiez que les piles sont correctement insérées et que la polarité est correcte.
  • Replace old batteries with new AAA/LR03 batteries.
  • Assurez-vous qu'il n'y a aucun obstacle entre la télécommande et l'appareil.
• Learning function fails:
  • Ensure the original remote control is working and has sufficient battery power.
  • Verify that the IRRADIO remote and the original remote are aligned correctly, facing each other at a close distance (1-3 cm).
  • Make sure you are pressing and holding the buttons for the required duration during programming.
  • Try programming in a room with less ambient light, as strong light sources can sometimes interfere with IR signals.
• Programmed button does not work:
  • The learning process might not have been successful for that specific button. Repeat the programming steps for that button.
  • Ensure the original remote's signal was strong and clear during programming.

7. Spécifications

8. Garantie et assistance

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Irradio webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.