RCYAGO Sprinkler Timer User Manual

Introduction

The RCYAGO Sprinkler Timer is an advanced, programmable water timer designed for efficient garden and lawn irrigation. Featuring two independent outlets, it allows for precise control over watering schedules, ensuring your plants receive optimal hydration while conserving water. This manual provides comprehensive instructions for installation, operation, and maintenance of your new sprinkler timer.

Caractéristiques principales

• Dual Independent Outlets: Two large outlets, each with a maximum flow rate of 35 liters per minute, allowing separate watering schedules for different zones.
• Durée d'arrosage flexible : Set watering times from 1 minute to 5 hours 59 minutes per zone.
• Customizable Cycle Intervals: Program watering cycles every 1 to 7 days, or select specific days of the week (Monday to Sunday).
• Six Independent Programs: Each of the two outlets can be set with up to three distinct watering plans (P1, P2, P3) to meet varied plant needs throughout the day.
• Mode d'arrosage manuel : Provides on-demand watering from 0 to 59 minutes, ideal for additional care without disrupting preset schedules.
• Fonction de retard de pluie : Pause watering for 1 to 7 days based on local rainfall, preventing overwatering and saving water.
• Conception durable et étanche : IP55 waterproof rating with multiple sealing washers and threaded sealing tape to prevent leaks.
• Installation facile : Features a 360° rotatable interface for quick and simple setup, compatible with 3/4" or 1/2" faucets.
• Affichage convivial : Equipped with a 2.5-inch LCD display and a low battery reminder for convenient operation.

Configuration et installation

1. Installation de la batterie

The timer requires 4 new AA (1.5V) alkaline batteries (not included). Locate the battery compartment on the back of the unit. Open the cover, insert the batteries according to the polarity markings, and securely close the cover, ensuring the rubber ring is properly seated to maintain waterproofing.

Image : Le bas view of the sprinkler timer, highlighting the battery compartment for 4 AA batteries and the IP55 waterproof rating, along with a stainless steel filter.

2. Raccordement au robinet

The timer is designed for easy connection to standard outdoor faucets. It includes thread reducers for compatibility with both 3/4" and 1/2" sized faucets. Ensure the O-ring is properly seated in the connector before attaching the timer to your faucet. The 360° rotatable interface allows for flexible positioning.

Image: A visual guide demonstrating the fast installation process for the sprinkler timer, showing connections to both 1/2" and 3/4" hose faucets using the O-ring, 360° rotating connector, and 1/2" garden hose male thread fittings.

3. Raccordement des tuyaux

Connect your garden hoses to the two independent outlets at the bottom of the timer. Each outlet is compatible with any standard 3/4" or 1/2" garden outdoor hose. Use the provided threaded sealing tape and sealing washers to ensure a leak-proof connection.

Opération

Comprendre l'affichage et les commandes

The timer features a clear 2.5-inch LCD display and intuitive buttons for programming. The display shows current settings, time, and program status. The main buttons include PROGRAM, OK, MANUA, -, +, DELAY, ZONE, and SET.

Image: The RCYAGO Sprinkler Timer showing its main LCD display, control buttons (PROGRAM, OK, MANUA, -, +, DELAY, ZONE, SET), and the two independent outlets.

Setting Watering Programs (P1, P2, P3)

The timer allows you to set up to three independent programs (P1, P2, P3) for each of the two zones. This enables highly customized watering schedules.

1. Sélectionnez Zone : Appuyez sur le ZONE button to switch between Zone 1 and Zone 2.
2. Entrez en mode programme : Appuyez sur le PROGRAMME button to cycle through P1, P2, P3, and Auto/Manual/OFF modes.
3. Définir l'heure de début : When a program (P1, P2, or P3) is selected, use the + et - buttons to adjust the start time. Press ENSEMBLE or OK pour confirmer.
4. Définir la durée d'arrosage (durée) : Adjust the watering duration from 1 minute to 5 hours 59 minutes using the + et - boutons. Presse ENSEMBLE or OK pour confirmer.
5. Définir la fréquence d'arrosage (à quelle fréquence) : Choose the watering frequency (e.g., every 1-7 days or specific days of the week) using the + et - boutons. Presse ENSEMBLE or OK pour confirmer.
6. Programme d'activation : Ensure the timer is set to "Auto" mode for the programs to run automatically.

Image: The sprinkler timer connected to two hoses, illustrating how each zone (Zone 1 and Zone 2) can be independently programmed with three different watering plans (P1, P2, P3) for varied start times and durations.

Image: A visual representation of the automatic watering schedule, showing a calendar for setting cycle intervals (every 1 to 7 days or specific days) and sliders for adjusting start water time, watering duration, and watering frequency.

Mode d'arrosage manuel

To initiate manual watering for either zone:

1. Appuyez sur le MANUA bouton.
2. Utilisez le + et - buttons to set the desired manual watering duration from 0 to 59 minutes.
3. Presse OK pour démarrer l'arrosage manuel.
4. Once the manual watering time ends, the timer will automatically revert to its preset Auto mode.

Fonction de retard de pluie

Pour interrompre temporairement votre programme d'arrosage en raison de la pluie :

1. Appuyez et maintenez enfoncé le RETARD bouton (ou + button for 5 seconds) until the delay option appears on the screen.
2. Utilisez le + et - buttons to select the desired delay duration from 1 to 7 days.
3. Presse OK to confirm the rain delay. The timer will resume its scheduled programs automatically after the delay period.

Image: The sprinkler timer connected to a faucet, displaying the rain delay function on its screen, indicating that watering can be delayed for up to 1 to 7 days to prevent overwatering.

Entretien

• Remplacement de la batterie : Replace batteries when the low battery indicator appears on the LCD display to ensure continuous operation. Always use new AA alkaline batteries.
• Prévention des fuites : Regularly check the sealing washers and threaded tape at the connections to ensure they are intact and preventing leaks. Replace if worn.
• Nettoyage du filtre : The timer is equipped with a stainless steel filter at the inlet. Periodically remove and clean this filter to prevent debris from entering the timer and affecting water flow.
• Entreposage d'hiver : In freezing conditions, disconnect the timer from the faucet and store it indoors to prevent damage from ice expansion.

Dépannage

• Le minuteur n'arrose pas : Check battery level. Ensure the timer is in "Auto" mode and not in "OFF" or "Delay" mode. Verify that the faucet is turned on.
• Pas de débit d'eau : Check for kinks in the hose. Ensure the stainless steel filter is not clogged. Verify water pressure from the faucet.
• Fuites au niveau des connexions : Ensure all connections are tightened properly. Check that O-rings and sealing washers are correctly seated and not damaged. Apply new threaded sealing tape if necessary.
• L'écran ne fonctionne pas : Remplacez les piles. Assurez-vous que les piles sont insérées en respectant la polarité.

Caractéristiques

Garantie et assistance

For warranty information or technical support, please refer to the product packaging or contact RCYAGO customer service directly. Keep your purchase receipt as proof of purchase.