OSRAM Base Classic A FIL 40 LED Bulb E27 Instruction Manual

1. Produit terminéview

The OSRAM Base Classic A FIL 40 LED Bulb is a modern, energy-efficient lighting solution designed for general illumination in household and interior applications. This LED bulb provides a warm white light (2700 Kelvin) with a brightness of 470 lumens, equivalent to a traditional 40-watt incandescent bulb, while consuming only 4 watts of power. It features an E27 screw base for easy installation and a long operational life of up to 10,000 hours.

Les principales caractéristiques comprennent :

• Pleasant Light: Delivers good light quality and instant 100% light without warm-up time.
• Conception robuste : Resistant to shocks and vibrations due to advanced LED technology.
• Longue durée de vie : Offers an extended operational life of up to 10,000 hours.
• Économie d'énergie : Very low energy consumption, making it highly efficient.
• Température optimale : Generates lower heat compared to standard incandescent bulbs.

Figure 1: OSRAM Base Classic A FIL 40 LED Bulb, showcasing its classic shape and E27 base.

2. Consignes de sécurité

• Sécurité électrique : Always ensure the power supply is switched off before installing, removing, or cleaning the bulb to prevent electric shock.
• VoltagCompatibilité : This bulb is designed for 220-240 Volts. Ensure your fixture's voltage correspond à cette exigence.
• Compatibilité du variateur : Ce produit est not suitable for use with dimmers. Using it with a dimmer may cause damage to the bulb or the dimmer, and will void the warranty.
• Utilisation en intérieur : Primarily for indoor use. If used outdoors, it must be installed in a suitable, enclosed outdoor fixture to protect it from elements.
• Génération de chaleur : While LED bulbs generate less heat than incandescent bulbs, they still produce some heat. Ensure adequate ventilation around the bulb.
• Élimination: Dispose of used bulbs according to local regulations for electronic waste. Do not dispose of with general household waste.

3. Configuration et installation

Follow these steps to safely install your OSRAM LED bulb:

1. Éteindre: Before beginning, ensure the power supply to the light fixture is completely switched off at the main switch or circuit breaker.
2. Retirer l'ancienne ampoule : If replacing an existing bulb, allow it to cool down completely before carefully unscrewing it counter-clockwise from the E27 socket.
3. Inspecter la prise : Check the E27 socket for any damage or debris. Ensure it is clean and dry.
4. Installer une nouvelle ampoule : Gently screw the OSRAM LED bulb clockwise into the E27 socket until it is finger-tight. Do not overtighten.
5. Restaurer l'alimentation : Une fois l'ampoule correctement installée, rétablissez l'alimentation électrique du luminaire.
6. Test: Allumez l'interrupteur pour vérifier que l'ampoule fonctionne correctement.

Figure 2: Close-up of the OSRAM LED bulb, highlighting the E27 screw base for installation.

4. Fonctionnement

Operating the OSRAM Base Classic A FIL 40 LED Bulb is straightforward:

• Allumer / éteindre: Use the standard wall switch connected to your light fixture to turn the bulb on or off.
• Lumière instantanée : The LED bulb provides instant 100% light output immediately upon switching on, with no warm-up time required.
• Non dimmable : As noted in the safety section, this bulb is not dimmable. It will operate at full brightness when switched on.

5. Entretien

The OSRAM LED bulb requires minimal maintenance:

• Nettoyage: Avant de nettoyer l'ampoule, assurez-vous qu'elle est hors tension et froide. Essuyez-la délicatement avec un chiffon doux et sec. N'utilisez pas de nettoyants liquides ni de produits abrasifs.
• Remplacement: Due to its long lifespan, frequent replacement is not expected. When replacement is necessary, follow the installation steps in Section 3.
• Aucune pièce réparable par l'utilisateur : The bulb contains no user-serviceable parts. Do not attempt to open or repair the bulb.

6. Dépannage

If you encounter issues with your OSRAM LED bulb, refer to the following common troubleshooting steps:

• L'ampoule ne s'allume pas :
  • Vérifiez que l'alimentation électrique du luminaire est activée.
  • Check that the bulb is screwed in securely into the E27 socket.
  • Testez l'ampoule dans un autre luminaire fonctionnel pour exclure un problème avec le luminaire.
  • If the bulb still does not light up, it may be faulty and require replacement.
• Scintillement ou gradation :
  • Confirm that the bulb is not connected to a dimmer switch, as this bulb is not dimmable.
  • Vérifiez les connexions desserrées au niveau du luminaire ou du câblage.
  • Assurer le voltage supply is stable and within the bulb's specified range (220-240V).
• Bruit inhabituel :
  • LED bulbs are generally silent. If you hear buzzing, ensure the bulb is not on a dimmer circuit.
  • Vérifiez les connexions desserrées dans l’appareil.

7. Spécifications

Figure 3: Technical drawing illustrating the dimensions of the OSRAM LED bulb. The 'd' indicates diameter and the vertical line indicates height.

Figure 4: EU Energy Label for the LEDVANCE AC32396 (OSRAM) LED bulb, indicating an energy efficiency class of E and consumption of 4 kWh/1000h. For more details, visit the official EPREL database: Lien vers la base de données EPREL.

8. Garantie et assistance

For warranty information and customer support, please refer to the documentation provided with your purchase or visit the official OSRAM webConsultez le site. Conservez votre preuve d'achat pour toute réclamation au titre de la garantie.