TOWODE Home Alarm System Kit User Manual

1. Introduction

This user manual provides detailed instructions for the installation, operation, and maintenance of your TOWODE Home Alarm System Kit. This wireless security system is designed to protect your property with a loud siren, motion detection, and door/window sensors. The system comes pre-programmed for immediate use upon plugging into an outlet and arming via remote. It is also expandable, supporting up to 40 sensors and 10 remote controls. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

Figure 1 : Un surview of the TOWODE KERUI Alarm System components, highlighting its expandability with additional sensors and remotes, and noting that it comes pre-programmed for immediate use.

2. Contenu du colis

The TOWODE Home Alarm System Kit includes the following components:

• 1x Siren (Horn)
• 1x Infrared Motion Detector
• 2x Wireless Door/Window Alarm Sensors
• 2x télécommandes
• 1x Power Adapter (for siren)
• Mounting screws and double-sided adhesive tape

3. Configuration et installation

Follow these steps to set up your alarm system:

3.1 Installation de la sirène

1. Choose a central location for the siren, preferably where its sound can be heard clearly throughout the protected area.
2. Mount the siren to a wall using the provided screws. Drilling may be required.
3. Connect the siren to the power adapter, then plug the adapter into a standard electrical outlet.

Figure 2: Siren components and installation points.

3.2 Motion Detector (PIR Sensor) Installation

1. Install the infrared motion detector on a wall in an area where it can cover the desired detection zone. Avoid pointing it directly at heat sources or windows that receive direct sunlight.
2. Secure the detector using screws.
3. The detection angle is approximately 110° horizontal and 60° vertical, with a detection range of 6-8 meters.

Figure 3: Motion detector coverage area.

3.3 Door/Window Sensor Installation

1. Attach the two parts of the door/window sensor to the door/window frame and the movable part (door/window) using double-sided adhesive tape or screws.
2. Ensure the two parts are aligned and close to each other (within 1 cm) when the door/window is closed.
3. The sensor is powered by a 1x 23A 12V battery (included).

Figure 4: Wireless door sensor installation.

3.4 Appairage des télécommandes et des capteurs

The system is typically pre-programmed before shipment. If you need to pair new accessories or re-pair existing ones:

1. Unplug the siren from the power outlet.
2. Plug the siren back into the power outlet.
3. Repeat unplugging and plugging in the siren 3 times. This puts the siren into pairing mode.
4. Within a short time after the third plug-in, trigger the sensor (e.g., open the door for a door sensor, or wave in front of the motion detector) or press any button on the remote control. The siren will emit a sound to confirm successful pairing.

Figure 5: Pairing process for sensors and remotes.

The system supports up to 10 remote controls and 40 sensors. You can expand your system by adding more compatible TOWODE accessories.

4. Mode d'emploi

4.1 Armement du système

To arm the system, press the Bras button (usually a closed padlock icon) on your remote control. The siren will emit a confirmation sound, indicating the system is armed and ready to detect intrusions.

Figure 6: How the alarm system detects and protects.

4.2 Désarmer le système

To disarm the system, press the Désarmer button (usually an open padlock icon) on your remote control. The siren will emit a confirmation sound, indicating the system is disarmed.

4.3 Fonction d'urgence (SOS)

In case of an emergency, press the [Oui] button on your remote control. This will immediately trigger the siren to sound at 115 dB, alerting others in the vicinity and potentially deterring intruders. This function can be used for emergency calls for help.

4.4 Alarm Trigger and Duration

When a paired sensor (motion detector or door/window sensor) is triggered while the system is armed, the siren will sound for approximately 2 minutes at 115 dB. If the system is not disarmed manually after this period, the siren will stop, and the system will need to be re-armed to resume protection.

Note: The siren volume is fixed and cannot be adjusted.

5. Entretien

Un entretien régulier garantit le fonctionnement optimal de votre système d'alarme :

• Remplacement de la batterie : The wireless door/window sensors and remote controls use 23A 12V batteries. Replace batteries when the indicator light on the sensor or remote appears dim or when performance degrades.
• Nettoyage: Periodically clean the exterior of all components with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Vérification de la connexion : Ensure all wired connections (siren power) are secure and free from damage.
• Test de fonctionnalité : Test the system regularly by arming it and triggering each sensor to ensure the siren sounds correctly.

6. Dépannage

If you encounter issues with your TOWODE Home Alarm System, refer to the following common problems and solutions:

7. Spécifications

8. Assistance et coordonnées

For any questions, technical assistance, or support regarding your TOWODE Home Alarm System Kit, please contact the seller or manufacturer directly. Refer to your purchase documentation for specific contact details.

Manufacturer: TOWODE

Nous nous engageons à fournir des produits et un support de haute qualité.