Introduction
Thank you for choosing the KEPLUG 8.7-inch Wired Motion Sensor LED Ceiling Light. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new lighting fixture. This product features a built-in motion and light sensor, adjustable color temperature, and multiple operating modes, designed for various indoor applications.
Image: Two KEPLUG 8.7-inch wired motion sensor LED ceiling lights, showcasing their round, flush-mount design and integrated sensor modules.
Configuration et installation
This KEPLUG LED ceiling light is designed for hardwired installation on either ceilings or walls. Please ensure the power supply is turned off at the circuit breaker before beginning installation. It is recommended that installation be performed by a qualified electrician.
Étapes de pré-installation :
- Sélectionnez la température de couleur : Before mounting, locate the color temperature switch on the back of the light fixture. Slide the switch to select your desired color temperature: 3000K (Warm White), 4000K (Natural White), or 6000K (Cool White). This setting cannot be changed after installation without removing the fixture.
- Rassemblez les outils : Ensure you have the necessary tools, including a screwdriver, wire strippers, and electrical tape.
Étapes d'installation :
- Installez le support de montage : Secure the provided mounting bracket to the ceiling or wall junction box using the screws and anchors. Ensure the bracket is firmly attached and level.
- Connecter le câblage : Connect the household electrical wires to the corresponding wires on the light fixture using the provided wire nuts. Typically, black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Ensure all connections are secure.
- Fixer le luminaire : Align the light fixture with the installed mounting bracket. Push the fixture upwards and twist clockwise until it locks securely into place. Ensure the fixture is flush against the mounting surface.
- Restaurer l'alimentation : Une fois le luminaire correctement installé, rétablissez le courant au niveau du disjoncteur.
Image: Illustration showing the mounting bracket being secured to the ceiling with screws and anchors.
Image: Hands demonstrating the easy lock installation method, showing the light fixture being twisted onto the mounting bracket.
Mode d'emploi
Your KEPLUG motion sensor LED ceiling light offers adjustable settings for optimal performance.
Modes de fonctionnement :
The light fixture features a slide switch on the side to select between three operating modes:
- Marche : The light functions as a standard ceiling lamp, remaining continuously on. It can be controlled via your wall switch. Motion sensing is disabled in this mode.
- Mode ARRÊT : La lumière est éteinte.
- Mode automatique: This mode activates the motion and light sensors. The light will turn on automatically when motion is detected in low ambient light conditions.
Image: Visual representation of the three operating modes (ON, OFF, AUTO) and how they affect the light's behavior based on ambient light and motion.
Motion Sensor Functionality (AUTO Mode):
In AUTO mode, the built-in microwave motion sensor detects movement within a 120-degree angle and a range of 9-18 feet. The light will activate when motion is detected and the ambient light is low. After motion ceases, the light will remain on for a set duration before automatically turning off.
Paramètres de minuterie réglables :
The light offers three adjustable timer settings for how long it remains on after motion is no longer detected:
- 30 secondes
- 120 secondes
- 180 secondes
To adjust the timer, locate the small slide switch next to the motion sensor on the light fixture and select your preferred duration.
Image: Illustration detailing the motion sensor's detection angle and range, along with the switch for selecting the 30s, 120s, or 180s auto-off timer.
Sélection de la température de couleur :
As mentioned in the setup, the color temperature (3000K Warm White, 4000K Natural White, 6000K Cool White) is selected via a switch on the back of the fixture prior to installation.
Image: A visual comparison of the three selectable color temperatures: 3000K Warm White, 4000K Natural White, and 6000K Cool White, as emitted by the light fixture.
Entretien
To ensure the longevity and optimal performance of your KEPLUG LED ceiling light, follow these simple maintenance guidelines:
- Nettoyage: Disconnect power to the fixture before cleaning. Use a soft, dry, or slightly damp cloth to wipe the surface of the light. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish or electronic components.
- Inspection: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, consult a qualified electrician.
- Remplacement de l'ampoule : This fixture uses integrated LED technology, meaning the LED bulbs are not user-replaceable. The LEDs are designed for a long lifespan (over 30,000 hours).
Dépannage
If you encounter issues with your KEPLUG motion sensor LED ceiling light, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas. | Pas d'alimentation électrique. Mode incorrect sélectionné. Sufficient ambient light (in AUTO mode). | Vérifiez le disjoncteur et l'interrupteur mural. Ensure the mode switch is set to 'ON' or 'AUTO'. In 'AUTO' mode, the light will only activate in low light conditions. Test in a darker environment. |
| Le capteur de mouvement ne détecte aucun mouvement. | Light is not in 'AUTO' mode. Obstruction dans la zone de détection. La lumière ambiante est trop élevée. Le mouvement se situe hors de la portée/de l'angle de détection. | Ensure the mode switch is set to 'AUTO'. Dégagez tout objet obstruant le capteur. view. The sensor is designed to activate in low light. If the area is bright, it will not turn on. Ensure motion occurs within the 9-18 feet range and 120-degree angle. |
| La lumière s'éteint trop vite ou reste allumée trop longtemps. | Mauvais réglage de la minuterie. | Adjust the timer switch on the fixture to 30s, 120s, or 180s as desired. |
| Difficulty with mounting. | Mounting surface is not flat. | Ensure the ceiling or wall surface is perfectly flat for proper alignment and secure attachment of the fixture. |
Spécifications du produit
| Fonctionnalité | Détail |
|---|---|
| Marque | KÉPLUG |
| Nom du modèle | motion sensor ceiling light |
| Dimensions du produit | 8.66"L x 8.66"W x 1.11"H (22cm diameter, 2.5cm thickness) |
| Poids de l'article | 2.01 livres (0.91 kilogramme) |
| Quoitage | 18 watts |
| Luminosité | 1600 lumens |
| Température de couleur | 3000K (Warm White), 4000K (Natural White), 6000K (Cool White) - Adjustable |
| Source d'énergie | AC (Hardwired) |
| Voltage | 110 volts |
| Caractéristiques spéciales | Adjustable Color Temperature, Energy Efficient, Motion Sensor, Timer, Water Resistant |
| Angle de détection du capteur de mouvement | 120 degrés |
| Portée de détection du capteur de mouvement | 9 à 18 pieds (environ 3 à 5 mètres) |
| Type d'installation | Plafonnier |
| Matériel | Plastique ABS |
| Utilisation intérieure/extérieure | Intérieur |
| Durée de vie | Plus de 30,000 heures |
| Composants inclus | Matériel de montage |
Image: Technical drawing illustrating the dimensions of the KEPLUG ceiling light, showing a diameter of 22cm and a thickness of 2.5cm.
Informations sur la garantie
For detailed warranty information regarding your KEPLUG Motion Sensor LED Ceiling Light, please refer to the product packaging or contact KEPLUG customer support directly. Warranty terms and conditions may vary.
Assistance clientèle
If you have any questions, require technical assistance, or need further support with your KEPLUG product, please contact KEPLUG customer service through the retailer's platform or the official KEPLUG webVeuillez vous munir du numéro de modèle et de la date d'achat de votre produit lorsque vous contactez l'assistance.
