Introduction
Thank you for choosing the Maxxima 4-inch Trimless Ultra-Thin Square Recessed LED Downlight. This product is designed to provide efficient and versatile lighting with a seamless, integrated appearance. Featuring 5 selectable color temperatures (CCT) and dimmable functionality, this downlight is suitable for various residential and commercial applications. This manual provides essential information for safe installation, operation, and maintenance.
Consignes de sécurité
- AVERTISSEMENT: Risque de choc électrique. Coupez l'alimentation au niveau du fusible ou du disjoncteur avant toute installation ou intervention.
- Ce produit doit être installé conformément au code d’installation applicable par une personne connaissant la construction et le fonctionnement du produit ainsi que les dangers encourus.
- Assurez-vous que tous les branchements électriques sont effectués correctement et en toute sécurité.
- Ne modifiez pas le dispositif. Toute modification peut annuler la garantie et engendrer des risques pour la sécurité.
- Convient pour damp et endroits humides.
- IC évalué pour le contact direct avec l’isolation.
- ETL Listed for safety and quality assurance.
Contenu du colis
Vérifiez que tous les composants sont présents avant de commencer l'installation :
- 4-inch Trimless Square Recessed LED Downlight
- Integrated Junction Box (J-Box)
- Cadre en plâtre
- Manuel d'instructions
Image: Maxxima 4-inch trimless square recessed LED downlight with its integrated junction box.
Caractéristiques
| Fonctionnalité | Spécification |
|---|---|
| Numéro de modèle | MRL-S41555S |
| Taille | 4 pouces |
| Flux lumineux | 1000 lumens |
| Quoitage | 15 watts |
| Voltage | 120 VCA |
| Température de couleur (CCT) | 2700K/3000K/3500K/4000K/5000K Selectable |
| Indice de rendu des couleurs (IRC) | 90 |
| Gamme à intensité variable | 20 % - 100 % |
| Propagation du faisceau | 38° |
| Durée de vie | 50,000 heures |
| Matériel | Aluminium |
| Certifications | Répertorié ETL |
| Dimensions du luminaire | 6.4" W x 6.4" L x 4" D |
| Dimensions de la boîte de jonction | 4 po L x 2.5 po l x 1.5 po P |
Image: Dimensions of the Maxxima 4-inch trimless square recessed LED downlight.
Instructions d'installation
Note: No ceiling can or housing is required for this trimless downlight. Always ensure power is disconnected before installation.
- Préparer le découpage : Create a suitable opening in the ceiling for the plaster frame. Refer to the product dimensions for accurate sizing.
- Install the Plaster Frame: Insert the plaster frame into the new cutout. Secure the plaster frame to the sheetrock using appropriate screws. This frame will be plastered and painted over to achieve a seamless, trimless look.
Image: Diagram illustrating the installation of the plaster frame to the sheetrock.
- Plaster and Paint: Once the plaster frame is securely installed, plaster and paint over it to blend it with the ceiling surface. Allow sufficient drying time.
- Connect the Junction Box: Feed the integrated junction box through the plaster frame opening. Make the necessary electrical connections inside the J-Box according to local electrical codes. Ensure the J-Box is accessible for future servicing if required.
- Install the Downlight Fixture: Connect the downlight fixture to the junction box cable. Carefully insert the downlight fixture into the plaster frame opening. Twist and lock the fixture into place using the integrated twist locks. This secures the light and completes the trimless installation.
Image: Securing the downlight fixture into the plaster frame using twist locks.
Mode d'emploi
Sélection de la température de couleur (CCT) :
- The downlight features a selectable CCT switch located on the back of the fixture.
- Before final installation (or by carefully accessing the back of the fixture if already installed), slide the switch to choose your desired color temperature: 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
Image: CCT selection switch and available color temperatures.
Fonctionnalité de gradation :
- This downlight is dimmable from 20% to 100% with compatible LED dimmers.
- For optimal performance, use a 150W max LED dimmer by Maxxima or other compatible LED dimmers.
Entretien
- Assurez-vous que l'alimentation électrique est coupée avant le nettoyage.
- Clean the fixture with a soft, dry, or slightly damp tissu. N'utilisez pas de produits chimiques agressifs ou de nettoyants abrasifs.
- The integrated LED does not require bulb replacement.
Dépannage
| Problème | Cause possible | Solution |
|---|---|---|
| La lumière ne s'allume pas | No power to the fixture; Loose wiring; Faulty switch | Check circuit breaker; Verify wiring connections; Test switch functionality |
| La lumière scintille | Variateur incompatible ; câblage desserré ; circuit surchargé | Ensure dimmer is LED compatible; Check wiring; Reduce load on circuit |
| Température de couleur incorrecte | Interrupteur CCT mal réglé | Adjust the CCT switch on the back of the fixture |
Garantie
This Maxxima product comes with a Garantie de 3 ans from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact Maxxima customer support.
Soutien
For technical assistance, troubleshooting, or product inquiries, please visit the official Maxxima website or contact their customer support team. Refer to the product packaging or Maxxima's website pour les informations de contact actuelles.
