Introduction
Thank you for choosing the Beghelli 4340F 100 Lumen LED Emergency Lamp. This device is designed to provide reliable emergency lighting in various environments. Please read this manual carefully before installation and use to ensure proper function and safety.
Produit terminéview
The Beghelli 4340F is a compact and efficient LED emergency lamp, featuring a built-in battery for automatic operation during power outages. Its modern design and durable plastic construction make it suitable for both indoor and outdoor applications.
Qu'y a-t-il dans la boîte
- Beghelli 4340F 100 Lumen LED Emergency Lamp
- Matériel de montage
- Manuel d'utilisation
Consignes de sécurité
- Débranchez toujours l’alimentation avant l’installation ou la maintenance.
- L'installation doit être effectuée par un électricien qualifié, conformément à la réglementation locale en matière de câblage.
- Do not expose the unit to extreme temperatures or direct moisture unless specified for outdoor use.
- N’essayez pas d’ouvrir ou de réparer l’appareil vous-même. Veuillez faire appel à un technicien qualifié.
- Assurez-vous que la surface de montage est stable et peut supporter le poids du lamp.
Configuration et installation
The Beghelli 4340F emergency lamp is designed for wall-mounted installation, typically recessed into a standard electrical box. Follow these steps for proper setup:
1. Préparer l'unité
Carefully remove the front cover of the emergency lamp to access the internal components. Connect the battery to the circuit board if it is not already connected. Ensure all connections are secure.
Image: The Beghelli 4340F emergency lamp with its front cover removed, revealing the internal battery and circuit board. This view is essential for initial setup and battery connection.
2. Mounting the Base
Install the black recessed box (not included, but shown in video as a typical installation method) into the wall according to standard electrical practices. Ensure the box is securely fastened and flush with the wall surface.
3. Câblage
Connect the mains power supply (230V~50Hz) to the terminals on the circuit board. Refer to the wiring diagram provided with the product for specific connections. Ensure correct polarity and secure all wires.
4. Assemblez le Lamp
Once the wiring is complete and tested, carefully place the lamp's internal assembly (with the battery and circuit board) into the white casing. Then, secure the white casing into the recessed box. Finally, attach the front cover to the white casing, ensuring it clicks firmly into place.
Video: This video demonstrates the assembly process of the Beghelli emergency lamp, including connecting the battery, placing the internal components into the casing, and securing the unit into a recessed box.
Video: This video illustrates the final steps of installing the emergency lamp into a recessed wall box, showing how the unit fits securely and the cover is attached.
Video: This video provides another perspective on the installation of the Beghelli emergency lamp, demonstrating the secure placement of the lamp into its housing.
Mode d'emploi
The Beghelli 4340F emergency lamp operates automatically once properly installed and connected to the mains power supply.
- Fonctionnement normal : When mains power is present, the lamp's internal battery will charge. The lamp restera éteint.
- Opération d'urgence: In the event of a power failure, the lamp will automatically switch on, providing 100 lumens of LED light from its built-in battery.
- Durée de la batterie : Le lamp is designed to provide illumination for a specified duration during an emergency. Refer to the specifications for battery autonomy.
- Essai: It is recommended to periodically test the emergency lamp by temporarily cutting the mains power to ensure it functions correctly.
Entretien
Regular maintenance ensures the longevity and reliability of your emergency lamp.
- Nettoyage: Nettoyer l'extérieur de la lamp Avec un chiffon doux et sec. N’utilisez pas de nettoyants abrasifs ni de solvants.
- Vérification de la batterie : The built-in battery has a limited lifespan. If the lamp's emergency duration significantly decreases, the battery may need replacement. This should be done by a qualified technician.
- Test de fonctionnalité : Perform a monthly test by simulating a power outage to confirm the lamp activates and provides adequate light.
- Inspection visuelle : Inspectez périodiquement le lamp pour tout signe de dommage ou d’usure.
Dépannage
If you encounter issues with your Beghelli 4340F emergency lamp, se référer aux problèmes et solutions courants suivants :
| Problème | Cause possible | Solution |
|---|---|---|
| Lamp ne s'allume pas en cas de coupure de couranttage. | No mains power; Battery not charged; Battery faulty; Internal wiring issue. | Check mains power supply; Allow 24 hours for initial battery charge; Replace battery (qualified technician); Contact support. |
| Lamp reste allumé en continu. | Mains power not connected; Faulty charging circuit. | Verify mains power connection; Contact support. |
| Reduced emergency lighting duration. | Dégradation de la batterie. | Replace battery (qualified technician). |
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Marque | Beghelli |
| Modèle | 4340F |
| Type de produit | Appareil d'éclairage |
| Flux lumineux | 100 lumens |
| Type d'ampoule | DIRIGÉ |
| Source d'énergie | Mains Powered (230V~50Hz) with Built-in Battery |
| Type de batterie | Pb 4V 3Ah (as per product label) |
| Energy Consumption Class (EU) | 125 lm/W |
| Matériel | Plastique |
| Couleur | Blanc |
| Forme | Rectangulaire |
| Type d'installation | Montage mural (encastré) |
| Utilisations spécifiques | De plein air |
| Certification | CE |
| Poids de l'article | 1 kg |
Garantie et assistance
Beghelli products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please refer to the official Beghelli webConsultez votre site web ou contactez votre distributeur local. Conservez votre reçu d'achat comme preuve d'achat.
