1. Introduction
Thank you for choosing the APLOS T03 Professional Tactical Flashlight. This manual provides essential information for the safe and effective use of your new flashlight. Please read it thoroughly before operation and retain it for future reference.
The APLOS T03 is a high-performance tactical flashlight designed for various applications, offering up to 5000 lumens of brightness and a long-range beam. It features multiple lighting modes, a durable aluminum alloy construction, and convenient USB-C recharging.
2. Contenu du colis
Upon opening your APLOS T03 package, please verify that all the following items are included:
- APLOS T03 Professional Tactical Flashlight
- 1 x 21700 Lithium-Ion Battery (5000mAh, pre-installed)
- Câble de chargement USB-A vers USB-C
- Pocket Clip (pre-attached)
- Cordon
- Joints toriques de rechange (2)
- Manuel d'utilisation
3. Produit terminéview et fonctionnalités
The APLOS T03 is engineered for reliability and performance. Key features include:
- Haute luminosité: Puissance lumineuse jusqu'à 5000 lumens.
- Longue portée: Illuminates distances up to 500 meters.
- Plusieurs modes d'éclairage : 7 modes including High, Medium, Low, Strobe, SOS, Save, and Moonlight.
- Fonction mémoire : Remembers the last used mode for convenience.
- Construction durable : Made from hard anodizing aluminum alloy with a stainless steel attack head.
- Rechargeable: Integrated USB-C charging port.
- Batterie haute capacité: Powered by a 5000mAh Lithium-Ion battery.
- Gestion intelligente de l'énergie : Prevents overheating and extends battery life.
- Water and Dirt Resistant: IP68 rated for protection against water and dust ingress.
4. Installation
Avant la première utilisation, veuillez suivre les étapes suivantes :
- Préparation de la batterie : The 21700 Lithium-Ion battery is pre-installed. Unscrew the tail cap and remove the small insulating sticker from the positive end of the battery. This sticker prevents battery discharge during shipping. Re-screw the tail cap firmly.
- Charge initiale: It is recommended to fully charge the flashlight before its first use. Refer to the 'Charging' section for detailed instructions.
- Attach Lanyard/Clip: If desired, attach the included lanyard to the tail cap or adjust the pocket clip for secure carrying.
5. Mode d'emploi
The APLOS T03 features a tactical tail switch with two detent levels for various functions.
5.1 Fonctionnement de base
- Momentané activé : Lightly tap and hold the tail switch for momentary illumination. Release to turn off.
- Marche/Arrêt constant : Appuyez à fond sur l'interrupteur arrière jusqu'à entendre un clic pour allumer ou éteindre la lampe torche.
5.2 Changement de mode
Lorsque la lampe torche est allumée :
- Modes de cycle : With the flashlight ON, lightly tap the tail switch (without clicking) to cycle through the main brightness modes: Low → Medium → High.
- Modes spéciaux :
- Strobe: From OFF, fully press and hold the tail switch for approximately 1 second to activate Strobe mode. Release to turn off. From ON, a quick double-tap of the tail switch (without clicking) may also activate Strobe.
- SOS: From OFF, a quick triple-tap of the tail switch (without clicking) may activate SOS mode.
- Moonlight/Save: These modes are typically accessed by cycling through the main modes or through specific quick-press combinations. Refer to the quick guide card for exact sequences if not covered by the main cycle.
5.3 Fonction de mémoire
The APLOS T03 features a mode memory function. When the flashlight is turned off and then back on, it will activate in the last used general lighting mode (Low, Medium, High).
5.4 Fonction de verrouillage
To prevent accidental activation, the flashlight may enter a lockout mode if left unused for a period (e.g., 3 minutes). To exit lockout, perform two rapid full presses (clicks) of the tail switch.
6. Chargement
The APLOS T03 is equipped with a convenient USB-C charging port.
- Câble de connexion : Open the rubber cover on the side of the flashlight to expose the USB-C port. Insert the USB-C end of the charging cable into the flashlight's port.
- Connecter l'alimentation : Plug the USB-A end of the cable into a compatible USB power source (e.g., wall adapter, power bank, computer USB port).
- Indicateur de charge : The indicator light near the charging port will show the charging status:
- Rouge: Charge en cours.
- Vert: Chargement terminé.
- Temps de charge : Une charge complète prend généralement environ 2 heures et 15 minutes.
- Déconnecter: Une fois la batterie complètement chargée, débranchez le câble et refermez soigneusement le couvercle en caoutchouc pour préserver l'étanchéité.
7. Entretien
Proper maintenance ensures the longevity and optimal performance of your APLOS T03 flashlight.
- Nettoyage: Nettoyez le corps de la lampe torche avec un chiffon doux et sec.amp chiffon. N'utilisez pas de nettoyants abrasifs ou de solvants.
- Joints toriques: Periodically inspect the O-rings for wear and tear. Replace them with the provided spare O-rings if necessary to maintain water resistance. Apply a thin layer of silicone grease to the O-rings to ensure a good seal.
- Fils: Keep the threads of the tail cap clean and lightly lubricated to ensure smooth operation and proper electrical contact.
- Entretien de la batterie: Si vous n'utilisez pas la lampe torche pendant une période prolongée, retirez la pile pour éviter tout risque de fuite ou de dommage. Conservez la pile dans un endroit frais et sec.
- Port de charge : Ensure the USB-C charging port cover is securely closed when not charging to prevent dust and water ingress.
8. Dépannage
If you encounter issues with your APLOS T03 flashlight, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| La lampe de poche ne s'allume pas. | Battery insulating sticker not removed. Battery low or depleted. Tail cap not fully tightened. Flashlight in lockout mode. | Remove the insulating sticker from the battery. Charge the battery fully. Tighten the tail cap securely. Perform two rapid full presses of the tail switch to exit lockout mode. |
| L'éclairage est faible ou vacille. | Low battery. Poor contact between battery and terminals. | Charge the battery fully. Clean the battery contacts and flashlight terminals. Ensure the tail cap is tightened. |
| Flashlight gets hot on High/Turbo mode. | Normal operation for high-lumen flashlights. Prolonged use at maximum output. | This is normal. The flashlight has intelligent power management to prevent damage. Reduce brightness to a lower mode if discomfort occurs. |
| Le voyant de charge ne s'allume pas. | Charging cable or power source issue. Charging port cover not fully open. | Try a different USB-C cable or power source. Ensure the charging port cover is fully open and the cable is inserted correctly. |
If the problem persists after attempting these solutions, please contact APLOS customer support for further assistance.
9. Spécifications
| Fonctionnalité | Spécification |
|---|---|
| Modèle | T03 |
| Source de lumière | LED (XHP70.3 HI 6000-6500K) |
| Puissance de sortie maximale | 5000 lumens |
| Distance du faisceau | Jusqu'à 500 mètres |
| Source d'énergie | 1 x 21700 Lithium-Ion Battery (5000mAh) |
| Port de chargement | USB-C |
| Matériel | Hard Anodizing Aluminum Alloy |
| Résistance à l'eau | IP68 (Waterproof and Dirtproof) |
| Dimensions | 1.61" (D) x 1.06" (W) x 5.59" (H) / 41mm (D) x 27mm (W) x 142mm (H) |
| Poids | Approx. 6.1 ounces / 173 grams (with battery) |
| Caractéristiques spéciales | Compact design, Smart Power Indicator, Memory Function, Tactical Tail Switch |
10. Garantie et assistance
APLOS products are manufactured to high-quality standards. For warranty information, product support, or service inquiries, please refer to the warranty card included in your product packaging or visit the official APLOS website. Please have your product model (T03) and purchase date available when contacting support.
