1. Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your STEELMATE 986E Unidirectional Security System. Please read this manual thoroughly before installation and use to ensure proper function and to maximize the security features for your motorcycle or scooter. Keep this manual for future reference.
2. Produit terminéview
The STEELMATE 986E is a 1-way security system designed to protect motorcycles and scooters. It features a robust alarm system, engine immobilization, and convenient remote control functions.
Caractéristiques principales :
- Unidirectional security function with flashing siren and turn signal alarm.
- Keyless driving capability.
- High-jack prevention function (forced engine stop).
- Built-in high-sensitivity shock sensor with 5 levels of adjustable sensitivity via remote control.
- Immobilizer function, preventing engine start without the dedicated key.
- Parking position checking function for locating your vehicle.
- Includes two compact remote controls.
Figure 2.1: STEELMATE 986E Product Packaging. The box displays the "STEELMATE Automotive" logo, "986E series", and "1-Way Motorcycle Alarm System" with key features listed.
Figure 2.2: Main components of the STEELMATE 986E system, including the control unit, siren, and two remote controls.
3. Configuration et installation
Proper installation is critical for the optimal performance of the STEELMATE 986E security system. It is recommended that installation be performed by a qualified technician.
3.1 Components Check:
Avant de commencer, assurez-vous que tous les composants sont présents :
- Unité de contrôle principale
- Sirène
- Deux télécommandes
- Faisceau de câblage
- Fusibles
- Manuel d'instructions (ce document)
Figure 3.1: All included components of the STEELMATE 986E system, including the main unit, siren, remote controls, wiring, fuses, and the instruction manual.
3.2 Étapes d'installationview:
- Mounting the Control Unit and Siren: Select an easily accessible yet concealed location for the main control unit and siren. Ensure they are protected from water and extreme temperatures.
- Connexion de câblage : Follow the provided wiring diagrams carefully. The wiring is color-coded for easier identification. Refer to the detailed wiring diagrams in sections 3.3 and 3.4.
- Essai: After all connections are made, test the system's functions (arming, disarming, shock sensor, engine start/stop) before fully reassembling the vehicle.
Figure 3.2: Visual guide for installation. It shows placing the control box and siren in an accessible location, color-coded wiring for easy connection, and a note indicating typical installation time of 15-20 minutes.
3.3 Wiring Diagram (AC Generation Systems):
This diagram illustrates the wiring connections for motorcycles and scooters equipped with an AC generation system.
Figure 3.3: Detailed wiring diagram for the STEELMATE 986E system when installed on vehicles with an AC generation system. It shows connections for the main unit, LED, siren, antenna, battery, engine lock, ignition code, turn signals, and engine start.
3.4 Wiring Diagram (DC Generation Systems):
This diagram illustrates the wiring connections for motorcycles and scooters equipped with a DC generation system. Note the inclusion of a normal close relay, which is an optional part.
Figure 3.4: Detailed wiring diagram for the STEELMATE 986E system when installed on vehicles with a DC generation system. This diagram includes an optional normal close relay for specific configurations.
4. Mode d'emploi
The STEELMATE 986E system is operated primarily using the provided remote controls.
Figure 4.1: Close-up of the STEELMATE 986E remote control, showing its buttons for various functions.
4.1 Activation et désactivation :
- Armement: Appuyez sur le Verrouillage button on the remote control. The system will arm, and the siren will chirp once. The turn signals may flash.
- Désarmant: Appuyez sur le Ouvrir button on the remote control. The system will disarm, and the siren will chirp twice. The turn signals may flash.
4.2 Keyless Driving Function:
This feature allows you to start your vehicle without using the physical key, provided the system is disarmed. Consult your installer for specific activation and usage details.
4.3 High-Jack Prevention (Engine Stop):
In an emergency situation, this function can remotely stop the engine of your vehicle. This feature is intended for security purposes only and should be used responsibly.
4.4 Shock Sensor Sensitivity Adjustment:
The built-in shock sensor has 5 levels of sensitivity. Refer to your remote control's specific button combination or sequence to adjust the sensitivity. Higher sensitivity detects lighter impacts, while lower sensitivity reduces false alarms.
4.5 Immobilizer Function:
When armed, the immobilizer prevents the engine from starting unless the system is disarmed with the dedicated remote control. This provides an additional layer of anti-theft protection.
4.6 Parking Position Checking Function:
To locate your vehicle in a crowded parking area, activate the parking position checking function via the remote control. The system will emit a sound, helping you pinpoint your vehicle's location within a range of approximately 10-20 meters.
Figure 4.2: Illustration of the parking position checking function, showing the remote control emitting a signal to locate the vehicle via sound in a parking lot.
5. Entretien
5.1 Remote Control Battery Replacement:
When the remote control's range decreases or it stops responding, it may be time to replace the battery. The process is simple:
- Ouvrez soigneusement le boîtier de la télécommandeasing, typically by prying it open with a small flat-head screwdriver.
- Remove the old button cell battery.
- Insérez une pile neuve du même type, en respectant la polarité.
- Fermez la télécommande casing en toute sécurité.
Figure 5.1: Step-by-step guide for replacing the remote control battery. It shows opening the casing, replacing the button cell battery, and reassembling the remote.
5.2 Soins généraux :
- Keep the main control unit and siren free from excessive moisture and dirt.
- Avoid dropping the remote controls or exposing them to extreme temperatures.
- Regularly check wiring connections for any signs of wear or corrosion.
6. Dépannage
If you encounter issues with your STEELMATE 986E system, refer to the following common problems and solutions:
| Problème | Cause possible | Solution |
|---|---|---|
| Le système ne s'arme pas/ne se désarme pas. | Remote control battery low or dead. Out of range. Wiring issue. | Replace remote battery. Move closer to the vehicle. Check wiring connections. |
| Fausses alertes. | Shock sensor sensitivity too high. Loose components. | Adjust shock sensor sensitivity to a lower level. Secure all installed components. |
| Engine does not start (immobilizer active). | System is armed. Wiring issue. | Disarm the system using the remote control. Verify immobilizer wiring. |
| Siren is not sounding. | Siren wiring disconnected. Faulty siren. | Check siren connections. Test siren functionality. |
Si le problème persiste après avoir essayé ces solutions, veuillez contacter le service client ou un technicien qualifié.
7. Spécifications
| Fonctionnalité | Détail |
|---|---|
| Modèle | 986E (Item Model Number: 140-0024) |
| Voltage | 12 V ± 2 V |
| Courant de veille | <20 mA |
| Sortie sirène | 120 dB |
| Main Control Box Dimensions | 3.5 x 6.5 x 2 cm (environ) |
| Total Weight (including parts) | 0.6 kg (1.3 lb) |
| Poids de la télécommande | 32 g per remote control |
| Matériel | Resin, electronics, metal, etc. |
| Connectivité | Sans fil |
| Couleur | Silver (for some components) |
8. Garantie et assistance
8.1 Informations sur la garantie :
Ce produit est livré avec un Garantie de 1 ans À compter de la date d'achat. Veuillez conserver votre preuve d'achat pour toute réclamation au titre de la garantie. La garantie couvre les défauts de fabrication et les dysfonctionnements dans des conditions normales d'utilisation.
8.2 Assistance clientèle :
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the manufacturer's authorized service center. Provide your product model number (986E) and date of purchase when seeking support.
