Cisco C9117AXI-B Catalyst 9100 Series Wi-Fi 6 Access Point User Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of your Cisco C9117AXI-B Catalyst 9100 Series Wi-Fi 6 Access Point. The C9117AXI-B is designed to provide high-performance wireless connectivity, supporting the Wi-Fi 6 (802.11ax) standard for enhanced speed and efficiency in demanding network environments. Please read this manual thoroughly before using the device to ensure proper setup and functionality.

Consignes de sécurité

• Veillez à installer l'appareil dans un endroit bien ventilé afin d'éviter toute surchauffe.
• Use only the power adapter supplied with the device or a compatible power source as specified by the manufacturer.
• Do not expose the access point to water or excessive humidity.
• Évitez de placer l'appareil à proximité de sources de chaleur ou à la lumière directe du soleil.
• Pour usage intérieur uniquement.
• Coupez l'alimentation avant de nettoyer ou d'entretenir l'appareil.

Contenu du colis

Vérifiez que tous les éléments sont présents dans le colis :

• Cisco C9117AXI-B Access Point
• Carte de pointeur
• Brackets (optional)
• Ceiling Grid Clips (optional)

Note: The availability of brackets and ceiling grid clips may vary based on the specific product bundle.

Installation

1. Installation physique

The Cisco C9117AXI-B Access Point can be mounted on a wall or ceiling. Choose a central location to maximize Wi-Fi coverage. Ensure the mounting surface is sturdy enough to support the device's weight.

Figure 1 : Face avant view of the Cisco C9117AXI-B Access Point. The device is white with the Cisco logo embossed in the center and a small indicator light below it.

2. Connexion électrique

Connect the power adapter to the access point's power input and then to a power outlet. Alternatively, if using Power over Ethernet (PoE), connect an Ethernet cable from a PoE-enabled switch or injector to the access point's Ethernet port. The device will power on automatically.

3. Connexion réseau

Connect an Ethernet cable from your network switch or router to the Ethernet port on the access point. This provides network connectivity and, if using PoE, power to the device.

4. Configuration initiale

The Cisco C9117AXI-B can operate in various modes, typically managed by a Cisco Wireless LAN Controller (WLC) or in a standalone mode. Refer to Cisco's official documentation for detailed configuration steps specific to your network environment and desired operating mode. Basic setup usually involves assigning an IP address, configuring SSID(s), and setting security protocols.

Opérationnel

Wi-Fi 6 Functionality

The C9117AXI-B supports the 802.11ax (Wi-Fi 6) standard, offering improved performance, capacity, and efficiency, especially in high-density environments. It operates on dual-bands (2.4 GHz and 5 GHz) to provide flexible connectivity options for various devices.

WPS (configuration protégée Wi-Fi)

The device supports WPS for simplified connection of compatible wireless clients. Consult your network administrator or Cisco documentation for enabling and using WPS securely within your network.

Indicateurs LED

The access point features an LED indicator that provides status information. Typically, a solid green light indicates normal operation, while other colors or blinking patterns may indicate different states such as boot-up, error, or activity. Refer to the official Cisco documentation for a detailed explanation of LED behavior.

Entretien

Nettoyage

To clean the access point, disconnect it from power. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or aerosol sprays directly on the device.

Mises à jour du firmware

Regularly check for and apply firmware updates to ensure optimal performance, security, and access to new features. Firmware updates are typically managed through your Cisco Wireless LAN Controller or directly via the device's management interface for standalone configurations. Always follow Cisco's recommended update procedures.

Réinitialisation de l'appareil

A factory reset will restore the access point to its default settings. This procedure is usually performed by pressing and holding a reset button (often recessed) for a specific duration while the device is powered on. Consult Cisco's documentation for the exact reset procedure for the C9117AXI-B model.

Dépannage

• Pas d'alimentation : Ensure the power adapter is securely connected to both the access point and a working power outlet, or that the PoE source is active and connected. Check the LED indicator for power status.
• Aucune connectivité réseau : Verify that the Ethernet cable is properly connected to both the access point and the network switch/router. Check the network status on your switch. Ensure the access point has obtained a valid IP address.
• Wi-Fi Not Broadcasting/Clients Cannot Connect: Confirm that the SSID is enabled and configured correctly. Check security settings (WPA2/WPA3). Ensure the access point is not in a disabled state or experiencing interference. Restart the access point and connected devices.
• Faible performance : Check for potential sources of interference (e.g., other wireless devices, microwaves). Ensure the access point is optimally placed. Verify that firmware is up to date.
• L'appareil ne répond pas : If the device is unresponsive, perform a factory reset as described in the Maintenance section.

Caractéristiques

Garantie et assistance

This product is offered as an Amazon Renewed item. Amazon Renewed products are backed by the Garantie Amazon Renewed, which provides a replacement or refund within 90 days of receipt if the product does not work as expected. For specific support related to the device's functionality or advanced configurations, please refer to the official Cisco support resources or contact the seller, Refurb Rack, for assistance with your renewed product.