BTF-LIGHTING FCOB COB LED Strip RGBCCT Instruction Manual

1. Introduction

Thank you for choosing the BTF-LIGHTING FCOB COB LED Strip RGBCCT. This flexible, high-density LED strip offers both vibrant RGB color changing capabilities and tunable white light, ranging from 3000K (warm white) to 6000K (cool white). Utilizing Flip Chip On Board (FCOB) technology, it provides ultra-bright, uniform illumination without visible light spots, making it ideal for various indoor decorative and functional lighting applications. This manual provides essential information for safe installation, operation, and maintenance of your LED strip.

Figure 1: BTF-LIGHTING FCOB COB LED Strip RGBCCT

2. caractéristiques du produit

• Color Changing and Tunable Color Temperature: Offers full RGB color spectrum (16 million colors) and tunable white light from 3000K (warm white) to 6000K (cool white) to suit various atmospheres.
• Ultra Bright and Uniform Illumination: Features FCOB technology with 840 LEDs/meter for high brightness, consistent color, and a smooth, dot-free light output.
• Flexible, Cuttable, and Linkable: The strip is soft and flexible, allowing for easy installation around corners. It can be cut at designated marks and linked in series using the provided 6-pin connectors.
• Large application : Suitable for living rooms, hallways, bedrooms, kitchens, accent lighting, cabinet lighting, stairs, mirrors, and various commercial and residential lighting projects.
• Construction durable : Built with a double-layer copper PCB board for enhanced electrical conductivity and heat dissipation, ensuring a lifespan of over 65,000 hours.

Figure 2: RGBCCT Light Strip showcasing tunable white light (3000K-6000K) and RGB color options.

Figure 3: Comparison of FCOB LED strips (uniform light) versus traditional SMD LED strips (visible dots).

3. Contenu du colis

Le forfait comprend les éléments suivants :

• 1x 9.8FT FCOB RGBCCT LED strip (DC24V, 840LED/m, 12mm width, IP30)
• 2x 6-pin connectors
• 6x LED Strip fixed clips
• 1x 15cm 6-pin 24AWG wire cable

Note: Power supply and controller are NOT included and must be purchased separately. Ensure compatibility with DC24V systems.

Figure 4: Included accessories: 6-pin connectors, fixed clips, and wire cable.

4. Consignes de sécurité

• Assurez-vous que l’alimentation électrique est débranchée avant l’installation ou la maintenance.
• Use only a DC24V power supply compatible with the LED strip's wattage exigences.
• Ne pliez pas brusquement la bande LED et n'appliquez pas de force excessive, car cela pourrait endommager les circuits internes.
• This product is rated IP30 for indoor use only. Avoid exposure to water or high humidity unless using an IP66 rated variant.
• Tenir hors de portée des enfants.

5. Configuration et installation

5.1 Préparation

• Thoroughly clean and dry the installation surface to ensure proper adhesion of the strip's backing.
• Plan the layout of your LED strip before cutting or mounting.

5.2 Découpe de la bande LED

The LED strip can be cut at designated marks to achieve the desired length. Always cut in the middle of the copper pads indicated by a scissor icon.

Figure 5: LED strip showing designated cutting points.

5.3 Mounting the LED Strip

Peel off the protective backing from the self-adhesive tape on the back of the LED strip and firmly press the strip onto the clean, dry surface. Use the included fixed clips for additional security, especially on vertical surfaces or around bends.

Figure 6: LED strip demonstrating flexibility, self-adhesive backing, and fixed clips for mounting.

5.4 Wiring the Controller and Power Supply

Connect the 6-pin wires from the LED strip to a compatible RGBCCT controller (e.g., SP530E or similar, sold separately). Ensure the correct color-coded wires are connected to their respective terminals (VCC, R, G, B, CW, WW, DAT, GND). Then, connect the controller to a DC24V power supply (AC110-220V input). Refer to the wiring diagram below for proper connections.

Figure 7: Wiring diagram for connecting the RGBCCT LED strip to a controller and power supply.

5.5 App Setup (for Smart Controllers)

If using a smart controller with Wi-Fi/Bluetooth capabilities, download the recommended app (e.g., Application Tuya Smart Life or BanlanX App as shown in the video) from your device's app store. Follow the in-app instructions to pair your controller and configure the LED type to 'PWM RGBCCT LED strip' for full functionality.

6. Fonctionnement

Once installed and configured, operate your LED strip using the compatible controller or smartphone app.

6.1 Contrôle des couleurs

• Use the color wheel or preset color options in your controller/app to select any desired RGB color.
• The FCOB technology ensures smooth color mixing and a uniform appearance.

6.2 Tunable White Light

• Adjust the white light color temperature from warm white (3000K) to cool white (6000K) to match your preference or ambient lighting.
• This feature allows for versatile lighting, from cozy warm tones to bright, crisp cool tones.

Figure 8: Demonstrating the tunable white light feature, showing 3000K, 4000K, and 6000K settings.

6.3 Dimming and Dynamic Modes

• Adjust the brightness of any selected color or white light using the dimming function in the app or controller.
• Explore various dynamic modes, such as color jumps, breathes, strobes, and gradients, for animated lighting effects.

7. Entretien

• Keep the LED strip clean by gently wiping it with a dry, soft cloth.
• Avoid using abrasive cleaners or solvents that could damage the strip.
• Regularly check connections for any signs of wear or looseness.

8. Dépannage

• Pas de lumière :
  • Check if the power supply is properly connected and receiving power.
  • Verify all wiring connections between the LED strip, controller, and power supply are secure and correct according to the diagram.
  • Ensure the controller is powered on and correctly configured in the app (LED type: PWM RGBCCT).
• Incorrect Colors or White Tones:
  • Confirm the LED type is correctly set to 'PWM RGBCCT LED strip' in your controller's app settings.
  • Check the wiring for any misconnections between the color channels (R, G, B, CW, WW).
• Luminosité inégale :
  • Ensure your power supply provides sufficient wattage for the entire length of the LED strip. Voltage drop can occur over long runs.
  • Vérifiez que la bande LED ne présente aucun dommage physique ni pliure.

9. Spécifications

10. Garantie et assistance

BTF-LIGHTING provides a Garantie sans souci de 12 mois for this product. For troubleshooting, replacements, or any questions regarding purchase or installation, please contact our Service client 24h/7 et XNUMXj/XNUMX.

E-mail: Support@btf-lighting.com