Introduction
The Lexip PIXMINDS Steelplay Adventure Twinpads are designed to enhance your gaming experience on compatible systems. These controllers offer precise input and comfortable handling for extended play sessions. This manual provides essential information for setup, operation, maintenance, and troubleshooting.
Contenu du colis
À l'ouverture de l'emballage, assurez-vous que tous les composants sont présents :
- Lexip PIXMINDS Steelplay Adventure Twinpads (Left and Right controllers)
- Manuel de l'utilisateur (ce document)
- Required Lithium Ion batteries (pre-installed or included)
Image: The retail packaging for the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the controllers and compatibility information.
Installation
The Twinpads are compatible with Nintendo Switch™ and Nintendo Switch™ OLED models. They connect wirelessly via Bluetooth.
1. Charging the Twinpads
The Twinpads come with Lithium Ion batteries. Before first use, ensure they are fully charged. The LED indicators on the controllers will show charging status.
2. Couplage avec votre appareil
- Assurez-vous que votre console Nintendo Switch est allumée et mise à jour avec la dernière version du logiciel système.
- Dans le menu ACCUEIL, sélectionnez « Manettes » > « Changer la prise/l’ordre ».
- On each Twinpad, press and hold the small pairing button located on the side or back until the player LEDs begin to flash.
- Once the LEDs stop flashing and remain solid, the Twinpad is successfully paired.
- Repeat for the other Twinpad.
Image : Avant view of the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the joysticks, D-pad, and action buttons.
Image : Côté view of the Lexip PIXMINDS Steelplay Adventure Twinpads, highlighting the rail for attachment and potential pairing button location.
Image : Dos view of the Lexip PIXMINDS Steelplay Adventure Twinpads, showing the ergonomic design and additional buttons.
Mode d'emploi
Once paired, the Twinpads function as independent left and right controllers, similar to the original Joy-Con controllers. They can be used for various games that support detached controller play.
Disposition et fonctions des boutons
- Left Twinpad: Analog Stick, D-pad, Minus (-) Button, Screenshot Button, SL/SR Buttons (on side rail).
- Right Twinpad: Analog Stick, A/B/X/Y Buttons, Plus (+) Button, Home Button, SL/SR Buttons (on side rail).
- Note: Specific button functions may vary depending on the game.
Reconnexion
If the Twinpads disconnect or you wish to reconnect them after turning off the console, simply press any button on each Twinpad. They should automatically reconnect to the last paired console.
Entretien
Proper care will extend the lifespan of your Twinpads.
- Nettoyage: Use a soft, dry cloth to wipe the surface of the controllers. For stubborn dirt, slightly dampNettoyez le chiffon avec de l'eau. Évitez d'utiliser des produits chimiques agressifs ou des nettoyants abrasifs.
- Stockage: Store the Twinpads in a cool, dry place away from direct sunlight and extreme temperatures.
- Entretien de la batterie: If storing for an extended period, ensure the batteries are partially charged (around 50%) to maintain battery health. Avoid fully discharging the batteries for long periods.
Dépannage
If you encounter issues with your Twinpads, try the following solutions:
- Controllers not pairing:
- Ensure the Twinpads are charged.
- Verify Bluetooth is enabled on your console.
- Try re-pairing the controllers by following the "Pairing with Your Device" steps.
- Move closer to the console to ensure a strong Bluetooth signal.
- Redémarrez votre console Nintendo Switch.
- Délai d'entrée ou déconnexion :
- Ensure there are no obstructions between the controllers and the console.
- Réduisez les interférences provenant d'autres appareils sans fil.
- Vérifiez les niveaux de la batterie et rechargez-la si nécessaire.
- Les boutons ne répondent pas :
- Nettoyez autour des boutons pour éliminer tous les débris.
- Ensure the controllers are properly paired and connected.
- Test the controllers in a different game or the console's controller test menu.
Caractéristiques
| Fonctionnalité | Détail |
|---|---|
| Modèle | JVASWI00101 |
| Marque | Lexip, PIXMINDS, Steelplay |
| Connectivité | Bluetooth |
| Compatibilité | Nintendo Switch™, Nintendo Switch™ OLED |
| Type de batterie | 1 batterie lithium-ion (incluse) |
| Poids de l'article | 5.6 onces (environ 158.76 grammes) |
| Dimensions du colis | 6.18 x 4.72 x 1.26 pouces (environ 15.7 x 12 x 3.2 cm) |
| Fabricant | PIXMINDS |
| Date de sortie | 1 janvier 2023 |
Garantie et assistance
The Lexip PIXMINDS Steelplay Adventure Twinpads come with a Garantie de 5 ans, as indicated on the product packaging. To register your product and activate your warranty, please visit the official warranty registration page:
Register Your Product for Warranty
For technical support or further inquiries, please refer to the official Lexip support channels or contact your retailer.
