1. Produit terminéview
The MTB Hopper Lil Air-2 is a portable and versatile bike ramp designed for various cycling disciplines, including BMX, MTB, Dirt, and Street riding. It caters to riders of all skill levels, from beginners learning to jump to experienced riders performing advanced tricks. Its design emphasizes portability, quick assembly, and durability.
Figure 1: The MTB Hopper Lil Air-2 ramp in its assembled state.
2. Instructions de montage
The Lil Air-2 ramp is designed for quick and straightforward assembly, typically taking approximately 5 minutes. Follow these steps to set up your ramp:
- Dépliez le Ramp: Carefully unfold the main sections of the ramp from its compact, backpack configuration.
- Relier les sections : Align and connect the numbered sections of the ramp. Ensure all interlocking parts are securely fitted.
- Sécuriser la structure : Fasten any ropes or straps to the designated hooks to stabilize the rampla structure.
- Positionnez le Ramp: Place the assembled ramp on a stable, level surface suitable for riding.
Video 1: This video demonstrates the assembly process and various uses of the MTB Hopper Lil Air-2 ramp, including its portability and different jump configurations.
Figure 2: Detail of the numbered interlocking sections for secure assembly.
3. Mode d'emploi
The Lil Air-2 ramp is designed for a smooth roll and provides an introduction to airy jumps, dirt street jumps, and slopestyle. It is suitable for various skill levels.
- Rider Skill Levels: Suitable for beginners learning to jump, as well as intermediate and experienced riders.
- Compatibilité vélo : Le ramp is compatible with Hard Tail and BMX bikes.
- Jump Characteristics: Le ramp features a smooth bended surface for quiet and great roll.
- Indicateurs de performance : Capable of supporting jumps with a maximum speed of 28 km/h, achieving a jump height of approximately 1.8 meters and a distance of 5 meters.
Figure 3: Diagram showing typical jump height and distance achievable with the Lil Air-2 ramp.
4. Consignes de sécurité
Always prioritize safety when using the MTB Hopper Lil Air-2 ramp. Adhering to these guidelines will help prevent injuries:
- Équipement de protection : Always wear appropriate safety gear, including a helmet, knee pads, elbow pads, and gloves.
- Inspecter avant utilisation : Before each use, thoroughly inspect the ramp for any damage, loose connections, or wear. Ensure all parts are securely fastened.
- Surface stable : Placez le ramp on a firm, level, and non-slip surface. Avoid uneven terrain or soft ground that could cause the ramp se déplacer.
- Clear Landing Zone: Ensure the landing area is clear of obstacles, debris, and other people. The landing zone should be smooth and provide adequate space for a safe landing.
- Limite de poids: Do not exceed the maximum load capacity of 130 kg (286.6 lbs). This includes the rider and their equipment.
- Surveillance: Younger riders should always be supervised by an adult.
- Niveau de compétence: Start with smaller jumps and gradually increase difficulty as your skills improve. Do not attempt tricks beyond your current ability.
- Conditions météorologiques : Avoid using the ramp in wet, icy, or windy conditions, which can affect stability and traction.
5. Entretien et maintenance
Proper care and maintenance will extend the lifespan of your MTB Hopper Lil Air-2 ramp:
- Nettoyage: Nettoyer le ramp avec annonceamp cloth to remove dirt and debris. Avoid harsh chemicals that could damage the plywood material.
- Stockage: Stocker le ramp in a dry, sheltered location when not in use to protect it from weather elements. Its foldable design allows for compact storage.
- Inspecter les fixations : Regularly check all bolts, screws, and connection points to ensure they are tight and secure. Tighten as necessary.
- Plywood Care: As the ramp is made of plywood, avoid prolonged exposure to moisture to prevent warping or degradation.
6. Spécifications du produit
| Fonctionnalité | Détail |
|---|---|
| Marque | MTB Hopper |
| Numéro de modèle | LILAIR |
| Matériel | Contre-plaqué |
| Couleur | Bleu |
| Poids de l'article | 16.1 kg (35.5 lb) (Note: Product specifications list 37.9 lbs, but feature bullets state 16.1 kg / 35.5 lbs. The feature bullet value is used here.) |
| Dimensions du produit (plié) | 870 x 490 x 140 mm (34.3 x 19.3 x 5.5 pouces) |
| Dimensions du produit (assemblé) | 89.4 po L x 37.8 po l x 35.6 po H (environ 227 cm L x 96 cm l x 90 cm H) |
| Capacité de charge | Jusqu'à 130 kg (286.6 lb) |
| Pliable | Oui |
| Heure de montage | Environ 5 minutes |
7. Assistance et garantie
For further assistance, product information, or warranty details, please visit the official MTB Hopper store or contact their customer support.
Boutique officielle de la marque : MTB Hopper Store on Amazon
