1. Produit terminéview
The VIMIN 5-Port Gigabit PoE Switch is an unmanaged Ethernet switch designed for reliable high-speed data transmission and power delivery over network cables. It features four Power over Ethernet (PoE+) RJ45 ports and one Gigabit uplink port, making it suitable for connecting various network devices such as NVRs, IP cameras, access points, and more. Its robust metal housing allows for versatile installation options, including desktop placement or wall-mounting.
Image: The VIMIN 5-Port Gigabit PoE Switch, showcasing its compact design and front panel with ports and indicators.
Les principales caractéristiques comprennent :
- 4x Gigabit PoE+ Ports: Delivers up to 30W per port with a total power budget of 72W, supporting IEEE 802.3af/at standards.
- 1x Gigabit Uplink Port: For high-speed connection to your main network or NVR.
- One-Key VLAN Mode: Enhances network security and bandwidth by isolating PoE ports while maintaining uplink communication.
- Prêt à l'emploi : Requires no complex configuration for immediate use.
- Protection robuste : Features 4KV lightning protection for enhanced device safety.
- Conception sans ventilateur : Assure un fonctionnement silencieux, adapté à divers environnements.
2. Instructions de configuration
Follow these steps to set up your VIMIN 5-Port Gigabit PoE Switch:
- Déballez l'appareil : Carefully remove the PoE switch, power cable, and user manual from the packaging.
- Connecter l'alimentation : Connect the included power cable to the power input port on the back of the switch and then plug it into a standard electrical outlet. The power indicator light on the front panel should illuminate.
- Connect Uplink Device: Connect your router, NVR, or main network device to the Gigabit uplink port (Port 5) using a standard Ethernet cable.
- Connectez les périphériques PoE : Connect your PoE-compatible devices (e.g., IP cameras, access points, VoIP phones) to any of the PoE+ ports (Ports 1-4) using Ethernet cables. The switch will automatically detect and power these devices if they are IEEE 802.3af/at compliant.
- Vérifiez les connexions : Check the LED indicators on the front panel. The 'Power' LED should be solid green. The 'Link/Act' LEDs for connected ports should be solid green (link) and blink (activity).
Image: Illustration of the PoE switch's front and rear, highlighting the built-in power supply and port designations (PoE ports 1-4, Uplink port 5).
Image: A visual guide to the plug-and-play setup, showing power connection, device connection (camera, AP, computer, printer), and network router connection.
The switch is designed for plug-and-play operation, requiring no software configuration for basic network functionality.
Image: The VIMIN PoE switch with its dimensions (14cm/5.5in length, 20cm/7.9in width, 4.4cm/1.7in height), emphasizing its compact size and plug-and-play nature.
Méthodes d'installation
The VIMIN PoE switch offers flexible installation options:
- Emplacement sur le bureau : Simply place the switch on a flat, stable surface.
- Montage mural : Le métal casing is designed for easy wall-mounting using appropriate screws (not included).
Image: Two installation methods are depicted: the switch placed on a desk and mounted vertically on a wall, demonstrating its versatility.
3. Mode d'emploi
Once the switch is powered on and devices are connected, it operates automatically. Here are specific operational features:
Fonctionnalité des ports
- PoE+ Ports (1-4): These ports provide both data connectivity and power to connected IEEE 802.3af/at compliant devices. Each port can deliver up to 30W.
- Uplink Port (5): This port is a standard Gigabit Ethernet port for connecting to your main network infrastructure. It does not provide PoE.
Image: The PoE switch is shown as a central hub connecting an Access Point, Router, Computer, Camera, Printer, and IP Phone, illustrating its broad compatibility.
One-Key VLAN Mode
The switch features a One-Key VLAN mode to enhance network security and performance. To activate or deactivate VLAN mode, use the dedicated switch on the front panel:
- VLAN ACTIVÉ : In this mode, PoE ports 1-4 are isolated from each other, preventing direct communication between devices connected to these ports. They can still communicate with the uplink port (Port 5). This is useful for preventing IP camera interference or enhancing security in multi-device setups.
- VLAN OFF (Ordinary Mode): All connected devices can communicate directly with each other, as in a standard unmanaged switch.
Image: A visual representation of the VLAN toggle switch on the PoE device, explaining the 'ON' (VLAN Mode) and 'OFF' (Ordinary Mode) functionalities with their respective benefits.
Performances Gigabit
The switch supports Gigabit Ethernet (1000 Mbps) on all ports, providing significantly faster data transfer rates compared to traditional 100 Mbps networks.
Image: A graphic demonstrating that the Gigabit switch offers speeds 10 times faster than a 100Mbps network, highlighting its superior performance.
4. Maintenance et entretien
To ensure optimal performance and longevity of your VIMIN PoE Switch, consider the following:
- Conditions environnementales : Operate the switch within its specified temperature range (14°F to 131°F / -10°C to 55°C) and humidity levels. Avoid direct sunlight, excessive heat sources, and damp environnements.
- Nettoyage: Utilisez un chiffon doux et sec pour nettoyer l'extérieur de l'interrupteur. N'utilisez pas de nettoyants liquides ni en aérosol.
- Ventilation: Ensure proper airflow around the switch. Although it has a fanless design, adequate ventilation helps dissipate heat.
- Protection contre la foudre : The switch features 4KV lightning protection. While this provides significant safeguarding, it is still advisable to disconnect the switch during severe electrical storms if possible.
- Conception sans ventilateur : The fanless design contributes to silent operation and reduces dust accumulation inside the device, minimizing maintenance needs.
Image: The PoE switch is depicted in both cold (14°F) and hot (131°F) environments, emphasizing its reliability under extreme temperature conditions.
Image: The PoE switch is shown in a quiet home setting, illustrating its fanless design for zero noise and its durable metal casing.
5. Dépannage
If you encounter issues with your VIMIN PoE Switch, refer to the following common troubleshooting steps:
- Pas d'alimentation :
- Assurez-vous que le câble d'alimentation est bien branché à la fois à l'interrupteur et à une prise électrique fonctionnelle.
- Vérifiez si la prise de courant fonctionne en y branchant un autre appareil.
- Aucun lien/activité sur le port :
- Verify that the Ethernet cable is properly connected at both ends (switch port and connected device).
- Essayez un autre câble Ethernet pour éliminer tout problème de câble.
- Vérifiez que l'appareil connecté est allumé et fonctionne correctement.
- For PoE ports, confirm the connected device is IEEE 802.3af/at compliant. Passive PoE devices are not supported.
- Périphérique PoE non alimenté :
- Check the total power budget (72W) and individual port power (30W). Ensure you are not exceeding the switch's capacity with multiple high-power devices.
- Verify the device requires PoE and is compatible with IEEE 802.3af/at standards.
- Essayez de connecter l'appareil à un autre port PoE.
- Network Performance Issues (Slow Speed):
- Assurez-vous que tous les appareils et câbles connectés prennent en charge le Gigabit Ethernet pour une vitesse optimale.
- Vérifiez la présence d'un trafic réseau excessif ou de boucles.
- If VLAN mode is enabled, ensure it is configured as desired for your network setup.
- Devices on PoE Ports Cannot Communicate with Each Other:
- Check the One-Key VLAN switch. If it is in 'ON' position, ports 1-4 are isolated. Switch it to 'OFF' for direct communication between these ports.
If issues persist after following these steps, please contact VIMIN customer support.
6. Spécifications
Detailed technical specifications for the VIMIN 5-Port Gigabit PoE Switch:
| Fonctionnalité | Description |
|---|---|
| Numéro de modèle | 5 Port | 4xPoE + 72W | 1xUPLink |
| Nombre de ports | 5 (4x PoE+, 1x Uplink) |
| PoE standard | IEEE 802.3af/at (Note: Does NOT support passive PoE) |
| Puissance maximale par port PoE | 30 W |
| Budget total d'alimentation PoE | 72 W |
| Taux de transfert de données | 1000 mégabits par seconde (Gigabit Ethernet) |
| Capacité de commutation | 10 Gbit/s |
| Type d'interface | PoE, RJ45 |
| Matériau du boîtier | Métal |
| Installation | Desktop or Wall-Mount |
| Dimensions (L x l x H) | 14 cm x 20 cm x 4.4 cm (5.5 pouces x 7.9 pouces x 1.7 pouces) |
| Poids de l'article | 1.94 livres (0.88 kilogramme) |
| Température de fonctionnement | 14°F à 131°F (-10°C à 55°C) |
| Composants inclus | 1* User Manual, 1* 5-Port PoE Switch, 1* Power Cable |
| Appareils compatibles | Access Point, Camera, Computer, Printer, Router |
| Code UPC | 756166576957 |
Image: A visual representation of the power capabilities, indicating 30W per PoE port and a total power budget of 72W for the switch.
Image: A diagram illustrating the 10 Gbps switching capacity of the VIMIN PoE switch, indicating its high-speed data processing capability.
7. Garantie et assistance
VIMIN is committed to providing reliable products and excellent customer service. For specific warranty details, please refer to the documentation included with your product or visit the official VIMIN website.
Assistance clientèle
If you require technical assistance, have questions about your product, or need to report an issue, please contact our support team:
- Assistance par e-mail : support@vimintech.com
- Équipe technique professionnelle : Access to a dedicated team for technical inquiries.
- 24H High Quality Service: Committed to providing timely and effective support.
Image: Contact details for VIMIN support, including email address, mention of a professional technical team, and 24-hour high-quality service.
