Manuel d'utilisation du manomètre numérique pour pneus ETENWOLF T300

Introduction

The ETENWOLF T300 Digital Tire Pressure Gauge is engineered for precise and reliable tire pressure measurements across a wide range of vehicles. Designed for durability and ease of use, it features a clear digital display, an integrated LED light for visibility in dark conditions, and long-lasting, replaceable AAA batteries. This manual provides essential information for the proper setup, operation, and maintenance of your T300 gauge.

Figure 1: ETENWOLF T300 Digital Tire Pressure Gauge (Vivid Orange)

Caractéristiques principales

• Process Level Accuracy: Calibrated manually to ANSI B40.7 Grade 2A (±0.5% of span) for high precision.


Figure 2: Laboratory-Tested Precision

• Large plage de pression : Measures tire pressure from 3 to 200 PSI, suitable for various vehicle types including pickups, RVs, and heavy-duty vehicles.
• Performances en conditions climatiques extrêmes : Built-in AI chip with thermal compensation ensures normal operation in temperatures ranging from -4°F to 130°F (-20°C to 54°C).


Figure 3: Accurate Readings in Any Weather

• Digital Display with LED Light: Features a bright digital screen for clear readings and an integrated LED light to illuminate dark areas for easy tire pressure checks at night.
• Piles AAA remplaçables : Uses easily replaceable AAA batteries, extending the lifespan of the device.
• Construction durable : Designed to withstand impacts and drops, ensuring long-term reliability.


Figure 4: Built to Last

• Arrêt automatique: S'éteint automatiquement après 30 secondes d'inactivité pour économiser la batterie.

Qu'y a-t-il dans la boîte

• 1 x ETENWOLF T300 Digital Tire Pressure Gauge
• 2 piles AAA
• Manuel d'utilisation

Figure 5 : Contenu de l'emballage

Installation

1. Installation des piles

1. Locate the battery compartment at the bottom of the gauge.
2. Gently slide off the battery cover.
3. Insérez deux piles AAA en veillant à respecter la polarité (+/-) indiquée à l'intérieur du compartiment.
4. Remettez fermement le couvercle de la batterie en place.

Figure 6 : Installation de la batterie

Mode d'emploi

1. Mise sous tension et étalonnage

• Press the power button located on the side of the gauge to turn it on.
• The gauge will display "0.0 PSI" and automatically calibrate. Wait until the display stabilizes before use.
• The integrated LED light will activate upon power-on, assisting in low-light conditions.

2. Vérification de la pression des pneus

1. Ensure the gauge is powered on and calibrated.
2. Firmly press the nozzle of the gauge onto the tire valve stem. A brief hiss of air may be heard.
3. Hold the gauge firmly in place until the digital display shows a stable pressure reading.
4. Remove the gauge from the valve stem. The reading will remain on the display for a few seconds before the auto shut-off activates.

Figure 7: Power On, Calibrate, and Check Pressure Steps

Figure 8: Using the LED Light for Tire Checks

Figure 9: Digital Pressure Reading Display

Entretien

1. Remplacement de la batterie

When the display becomes dim or the gauge does not power on, it is time to replace the batteries. Follow the steps in the "Installing Batteries" section under Setup.

2. Nettoyage et stockage

• Wipe the gauge with a soft, dry cloth to remove any dirt or debris. Do not use abrasive cleaners or immerse the device in water.
• Rangez le manomètre dans un endroit frais et sec, à l'abri de la lumière directe du soleil et des températures extrêmes.
• If storing for an extended period, it is recommended to remove the batteries to prevent leakage.

Dépannage

Caractéristiques

• Marque: ETENWOLF
• Modèle: T300
• Matériel: Plastique
• Plage de pression : 3-200 PSI
• Précision: ANSI B40.7 Grade 2A (±0.5% of span)
• Température de fonctionnement : -4°F à 130°F (-20°C à 54°C)
• Source d'alimentation : 2 piles AAA
• Dimensions (L x l x H) : 6.3 x 1.46 x 1.06 pouces
• Poids de l'article : 3.88 once (110 grammes)
• Taille de l'écran : 3.2 centimètres
• Arrêt automatique: Après 30 secondes

Garantie et assistance

ETENWOLF products are designed for quality and reliability. For specific warranty information, please refer to the warranty card included with your product or visit the official ETENWOLF website. For technical support, troubleshooting assistance, or any inquiries, please contact ETENWOLF customer service through the contact information provided on the product packaging or the official website.

Vous pouvez également visiter le ETENWOLF Store on Amazon pour plus d'informations sur les produits et les ressources d'assistance.